Cryogenic ductile and cleavage fracture of bcc metallic structures – Influence of anisotropy and stress states
Source abstract
Abstract
The anisotropic cryogenic ductile and cleavage fracture properties of a body-centered cubic (bcc) steel at −196°C have been investigated under a broad spectrum of loading conditions, crossing stress triaxiality range from −1/3 to 1.5, and along three loading directions. Fracture is completely impeded in uniaxial compression tests. Conventional brittle behavior is only observed in high triaxiality conditions for the investigated bcc steel, and on the contrary ductile fracture with shear and void coalescence as underlying mechanisms takes place in low (simple shear) and moderate triaxiality (uniaxial tension) at −196°C. Cleavage fracture occurs after significant plasticity at −196°C under moderate triaxiality conditions during tensile tests using flat-notched specimens under plane-strain tension. For all the stress states, anisotropy has shown a profound influence in ductile fracture, brittle fracture, and, particularly in the transition region mixed with two failure types. It is concluded that the reason for the anisotropic transition of activated failure mechanisms crossing stress states at −196°C is because strain hardening capacity, Lankford coefficients, fracture initiation strain as well as cleavage fracture strength are all dependent on loading orientations. Based on the collected local critical stress and strain variables from finite element simulations using an evolving anisotropic plasticity model, an anisotropic unified fracture criterion revealing the underlying failure mechanisms is developed and demonstrates distinguished predictive capability in describing cryogenic ductile and cleavage fracture properties under different stress states and loading directions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Fatigue and fracture mechanics · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Anderson · 2017
2. A new model of metal plasticity and fracture with pressure and Lode dependence10.1016/j.ijplas.2007.09.004 ↗
3. Application of extended Mohr–Coulomb criterion to ductile fracture10.1007/s10704-009-9422-8 ↗
4. Application of extended Mohr-Coulomb criterion to ductile fracture10.1007/s10704-009-9422-8 ↗
5. On fracture locus in the equivalent strain and stress triaxiality space10.1016/j.ijmecsci.2004.02.006 ↗
6. On the cut-off value of negative triaxiality for fracture10.1016/j.engfracmech.2004.07.011 ↗
7. Anisotropic ductile fracture10.1016/j.actamat.2004.06.020 ↗
8. Ductile failure modeling10.1007/s10704-016-0142-6 ↗
9. A local criterion for cleavage fracture of a nuclear pressure vessel steel10.1007/BF02663302 ↗
10. A local criterion for cleavage fracture of a nuclear pressure vessel steel10.1007/BF02663302 ↗
11. Continuum models of ductile fracture: a review10.1177/1056789509103482 ↗
12. A new statistical local criterion for cleavage fracture in steel. Part I: model presentation10.1016/j.engfracmech.2004.02.009 ↗
13. Advances in the mechanism of cleavage fracture of low alloy steel at low temperature. Part II: fracture model10.1023/A:1007304900578 ↗
14. Ductile failure under non-proportional loading10.1016/j.jmps.2022.104882 ↗
15. Ductile failure predictions using micromechanically-based computational models10.1016/j.jmps.2022.104873 ↗
16. On the predictive capabilities of the shear modified Gurson and the modified Mohr–Coulomb fracture models over a wide range of stress triaxialities and Lode angles10.1016/j.jmps.2011.04.006 ↗
17. Effect of Lode parameter on plastic flow localization after proportional loading at low stress triaxialities10.1016/j.jmps.2014.01.008 ↗
18. A Weibull stress model to predict cleavage fracture in plates containing surface cracks10.1046/j.1460-2695.1999.00202.x ↗
19. Calibration of Weibull stress parameters using fracture toughness data10.1023/A:1007521530191 ↗
20. A probabilistic model for prediction of cleavage fracture in the ductile-to-brittle transition region and the effect of temperature on model parameters10.1016/j.msea.2005.09.098 ↗
21. Anisotropic Hosford–Coulomb fracture initiation model: theory and application10.1016/j.engfracmech.2015.08.004 ↗
22. Analysis of ESAFORM 2021 cup drawing benchmark of an Al alloy, critical factors for accuracy and efficiency of FE simulations10.1007/s12289-022-01672-w ↗
23. A generalized Orowan model for cleavage fracture10.1016/j.engfracmech.2017.09.022 ↗
24. Ductile fracture prediction for metal sheets using all-strain-based anisotropic eMMC model10.1016/j.ijmecsci.2016.07.022 ↗
25. Fracture characteristics of 3 metals subjected to various strains, strain rates, temperatures and pressures10.1016/0013-7944(85)90052-9 ↗
26. Ductile failure as a constitutive instability in porous plastic solids10.1016/j.jmps.2020.103917 ↗
27. A new approach for ductile fracture prediction on Al 2024-T351 alloy10.1016/j.ijplas.2012.01.003 ↗
28. Brittle fracture in structural steels: perspectives at different size-scales10.1098/rsta.2014.0126 ↗
29. A hybrid approach for modelling of plasticity and failure behaviour of advanced high-strength steel sheets10.1177/1056789512439319 ↗
30. An evolving non-associated Hill48 plasticity model accounting for anisotropic hardening and r-value evolution and its application to forming limit prediction10.1016/j.ijsolstr.2017.04.007 ↗
31. Extension of a shear-controlled ductile fracture model considering the stress triaxiality and the Lode parameter10.1016/j.ijsolstr.2012.10.007 ↗
32. Anisotropic ductile fracture criterion based on linear transformation10.1016/j.ijplas.2017.04.008 ↗
33. Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality10.1016/j.ijplas.2013.08.006 ↗
34. A user-friendly anisotropic ductile fracture criterion for sheet metal under proportional loading10.1016/j.ijsolstr.2021.01.017 ↗
35. On the prediction of ductile fracture by void coalescence and strain localization10.1016/j.jmps.2018.02.002 ↗
36. Mechanism-based multi-surface plasticity model for ideal truss lattice materials10.1016/j.ijsolstr.2004.10.032 ↗
37. Micromechanically-motivated phenomenological Hosford–Coulomb model for predicting ductile fracture initiation at low stress triaxialities10.1016/j.ijsolstr.2015.02.024 ↗
38. Phenomenological uncoupled ductile fracture model considering different void deformation modes for sheet metal forming10.1016/j.ijmecsci.2018.04.025 ↗
39. Modification of the Gurson Model for shear failure10.1016/j.euromechsol.2007.08.002 ↗
40. Fracture and strength of solids10.1088/0034-4885/12/1/309 ↗
41. Development of the local approach to fracture over the past 25 years: theory and applications10.1007/s10704-006-0035-1 ↗
42. Failure of metals I: brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
43. Advances in cleavage fracture modelling in steels: micromechanical, numerical and multiscale aspects10.1016/j.crhy.2010.07.013 ↗
44. Plasticity and fracture of cast and SLM AlSi10Mg: high-throughput testing and modeling
45. A local approach to cleavage fracture modeling: an overview of progress and challenges for engineering applications10.1016/j.engfracmech.2017.12.021 ↗
46. An evolving plasticity model considering anisotropy, thermal softening and dynamic strain aging10.1016/j.ijplas.2020.102747 ↗
47. Investigation on the ductile fracture of high-strength pipeline steels using a partial anisotropic damage mechanics model10.1016/j.engfracmech.2020.106900 ↗
48. A unified fracture criterion considering stress state dependent transition of failure mechanisms in bcc steels at –196°C10.1016/j.ijplas.2022.103365 ↗
49. Influence of stress states on cleavage fracture in X70 pipeline steels10.1016/j.jpse.2022.100072 ↗
50. Local formability of medium-Mn steel
51. A non-associated flow rule for sheet metal forming10.1016/S0749-6419(01)00053-5 ↗
52. Anisotropic hardening and non-associated flow in proportional loading of sheet metals10.1016/j.ijplas.2009.02.003 ↗
53. Ductile to brittle transition of an A508 steel characterized by Charpy impact test10.1016/j.engfracmech.2004.03.011 ↗
54. Quantification and microstructural origin of the anisotropic nature of the sensitivity to brittle cleavage fracture propagation for hot-rolled pipeline steels10.1007/s10704-018-0297-4 ↗
55. An analysis of Lode effects in ductile failure10.1016/j.jmps.2021.104468 ↗
56. A statistical distribution function of wide applicability10.1115/1.4010337 ↗
57. Extension of the modified Bai-Wierzbicki model for predicting ductile fracture under complex loading conditions10.1111/ffe.12645 ↗
58. Cleavage fracture in bainitic and martensitic microstructures10.1016/S1359-6454(99)00200-1 ↗
59. Ductility prediction of HPDC aluminum alloy using a probabilistic ductile fracture model10.1016/j.tafmec.2022.103381 ↗
60. Investigation of the competition between void coalescence and macroscopic strain localization using the periodic homogenization multiscale scheme10.1016/j.jmps.2020.104042 ↗