Particle size effects in ductile composites: An FFT homogenization study
Source abstract
Abstract
We present a computational homogenization study on the particle size effect in ductile composites. The micromechanical formulation is based on non-local models through (i) the incorporation of a lower-order strain gradient plasticity model and (ii) the application of an implicit gradient regularization technique to the Gurson–Tvergaard–Needleman ductile damage model for metals. In this way, the extended model is equipped with two length-scale parameters, one for each non-local extension, which modulate the size dependent character of the formulation. The problem consists of a system of partial differential equations in which two Helmholtz-type equations for the damage regularization are coupled with the balance of linear momentum through the stress, which depends on the non-local variables and on the plastic strain gradient. A series of numerical simulations are conducted to investigate the behavior of three-dimensional microstructures representative of particle reinforced metal matrix composites. The change in strengthening and ductility, as a function of the particle size, is first analyzed by means of a parametric study in which the considered non-local extensions act both independently and together. Finally a comparative study with experimental results demonstrates that the particle size induced strengthening in metal matrix composites can be quantitatively captured by the considered model.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Composite Material Mechanics · Nonlocal and gradient elasticity in micro/nano structures · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. The physics of plastic deformation10.1016/0749-6419(87)90021-0 ↗
2. Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density10.1016/S1359-6454(99)00020-8 ↗
3. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
4. Characterization by X-ray computed tomography of decohesion, porosity growth and coalescence in model metal matrix composites10.1016/S1359-6454(01)00104-5 ↗
5. Damage initiation in model metallic materials: X-ray tomography and modelling10.1016/j.actamat.2004.02.001 ↗
6. A modified conventional theory of mechanism-based strain gradient plasticity considering both size and damage effects10.1016/j.ijsolstr.2020.05.023 ↗
7. Incompatibility and a simple gradient theory of plasticity10.1016/S0022-5096(01)00037-0 ↗
8. Plastic flow in a composite: a comparison of nonlocal continuum and discrete dislocation predictions10.1016/S0020-7683(00)00059-7 ↗
9. A numerical spectral approach for solving elasto-static field dislocation and g-disclination mechanics10.1016/j.ijsolstr.2014.08.009 ↗
10. Formulation of nonlocal damage models based on spectral methods for application to complex microstructures10.1016/j.engfracmech.2015.06.030 ↗
11. Multi-inclusion unit cell studies of reinforcement stresses and particle failure in discontinuously reinforced ductile matrix composites
12. Numerical implementation of static field dislocation mechanics theory for periodic media10.1080/14786435.2014.896081 ↗
13. Void nucleation effects in biaxially stretched sheets10.1115/1.3224807 ↗
14. Size-dependent inelastic behavior of particle-reinforced metal–matrix composites10.1016/S0266-3538(00)00235-9 ↗
15. A homogenization-based damage model for stiffness loss in ductile metal-matrix composites10.1016/j.jmps.2019.103812 ↗
16. Damage models for studying ductile matrix failure in composites10.1016/j.commatsci.2004.09.035 ↗
17. Micromechanical finite element analysis of metal matrix composites using nonlocal ductile failure models10.1016/j.commatsci.2005.12.032 ↗
18. A unified theory of thermomechanical materials10.1016/0020-7225(66)90022-X ↗
19. A reformulation of strain gradient plasticity10.1016/S0022-5096(01)00049-7 ↗
20. Strain gradient plasticity: Theory and experiment10.1016/0956-7151(94)90502-9 ↗
21. Mechanism-based strain gradient plasticity — I. Theory10.1016/S0022-5096(98)00103-3 ↗
22. Finite strain FFT-based non-linear solvers made simple10.1016/j.cma.2016.12.032 ↗
23. A unified treatment of strain gradient plasticity10.1016/j.jmps.2003.11.002 ↗
24. Continuum theory of ductile rupture by void nucleation and growth: Part I—Yield criteria and flow rules for porous ductile media10.1115/1.3443401 ↗
25. A theory of strain-gradient plasticity for isotropic, plastically irrotational materials. Part I: Small deformations10.1016/j.jmps.2004.12.008 ↗
26. Influence of microstructural scale on plastic flow behavior of metal matrix composites10.1016/S1359-6454(96)00277-7 ↗
27. Simulation of the hall-petch effect in FCC polycrystals by means of strain gradient crystal plasticity and FFT homogenization10.1016/j.jmps.2019.103755 ↗
28. Mechanism-based strain gradient plasticity — II. Analysis10.1016/S0022-5096(99)00022-8 ↗
29. A conventional theory of mechanism-based strain gradient plasticity10.1016/j.ijplas.2003.08.002 ↗
30. Predictive model for void nucleation and void growth controlled ductility in quasi-eutectic cast aluminium alloys10.1016/j.actamat.2005.02.037 ↗
31. Particulate reinforced metal matrix composites – a review10.1007/BF00544448 ↗
32. Jirasek · 2007
33. Numerical implementation of non-local polycrystal plasticity using fast Fourier transforms10.1016/j.jmps.2016.03.023 ↗
34. A continuous damage mechanics model for ductile fracture10.1115/1.3225775 ↗
35. Study on the load partition behaviors of high particle content B4C/Al composites in compression10.1177/0021998312472220 ↗
36. Three-dimensional multiparticle cell simulations of deformation and damage in sphere-reinforced composites10.1016/j.msea.2003.09.035 ↗
37. Particle reinforced aluminium and magnesium matrix composites10.1179/imr.1994.39.1.1 ↗
38. An algorithm for stress and mixed control in Galerkin-based FFT homogenization10.1002/nme.6069 ↗
39. DBFFT: A displacement based FFT approach for non-linear homogenization of the mechanical behavior10.1016/j.ijengsci.2019.103131 ↗
40. On the accuracy of spectral solvers for micromechanics based fatigue modeling10.1007/s00466-018-1598-1 ↗
41. An FFT framework for simulating non-local ductile failure in heterogeneous materials10.1016/j.cma.2021.113759 ↗
42. Intragranular localization induced by softening crystal plasticity: Analysis of slip and kink bands localization modes from high resolution FFT-simulations results10.1016/j.actamat.2019.06.010 ↗
43. A review of predictive nonlinear theories for multiscale modeling of heterogeneous materials10.1016/j.jcp.2016.10.070 ↗
44. Phase field modeling of fracture in multi-physics problems. Part I. Balance of crack surface and failure criteria for brittle crack propagation in thermo-elastic solids10.1016/j.cma.2014.11.016 ↗
45. Ensile and fracture toughness properties of SiCp reinforced al alloys: Effects of particle size, particle volume fraction, and matrix strength10.1361/10599490421358 ↗
46. A fast numerical method for computing the linear and nonlinear mechanical properties of composites
47. A numerical method for computing the overall response of nonlinear composites with complex microstructure10.1016/S0045-7825(97)00218-1 ↗
48. A nonlocal approach of ductile failure incorporating void growth, internal necking, and shear dominated coalescence mechanisms10.1016/j.jmps.2020.103891 ↗
49. Indentation size effects in crystalline materials: A law for strain gradient plasticity10.1016/S0022-5096(97)00086-0 ↗
50. Some geometrical relations in dislocated crystals10.1016/0001-6160(53)90054-6 ↗
51. Gradient enhanced damage for quasi-brittle materials10.1002/(SICI)1097-0207(19961015)39:19<3391::AID-NME7>3.0.CO;2-D ↗
52. Nonlocal modeling and simulation of ductile damage and failure in metal matrix composites10.1115/1.2840967 ↗
53. A numerical approximation to the elastic properties of sphere-reinforced composites10.1016/S0022-5096(02)00021-2 ↗
54. A computational micromechanics study of the effect of interface decohesion on the mechanical behavior of composites10.1016/j.actamat.2005.07.013 ↗
55. Ductile fracture of a metal matrix composite studied using 3D numerical modeling of void nucleation and coalescence10.1016/j.engfracmech.2017.10.027 ↗
56. Simo · 2006
57. On the relation between phase-field crack approximation and gradient damage modelling10.1007/s00466-016-1369-9 ↗
58. The mechanism of plastic deformation of crystals. Part I. – Theoretical10.1098/rspa.1934.0106 ↗
59. Plastic strain in metals
60. Analysis of the cup-cone fracture in a round tensile bar10.1016/0001-6160(84)90213-X ↗
61. An FFT-based Galerkin method for homogenization of periodic media10.1016/j.camwa.2014.05.014 ↗
62. Strain gradient continuum plasticity theories: Theoretical, numerical and experimental investigations10.1016/j.ijplas.2019.03.002 ↗
63. Observation of void nucleation, growth and coalescence in a model metal matrix composite using X-ray tomography10.1016/j.msea.2007.11.050 ↗
64. Three-dimensional multi-particle FE model and effects of interface damage, particle size and morphology on tensile behavior of particle reinforced composites10.1016/j.compstruct.2018.11.008 ↗
65. Fourier-based schemes for computing the mechanical response of composites with accurate local fields10.1016/j.crme.2014.12.005 ↗
66. Experimental and numerical studies of the effect of particle size on the deformation behavior of the metal matrix composites10.1016/j.msea.2006.10.158 ↗
67. A finite element perspective on nonlinear FFT-based micromechanical simulations10.1002/nme.5481 ↗
68. An enhanced finite element model considering multi strengthening and damage mechanisms in particle reinforced metal matrix composites10.1016/j.compstruct.2019.111281 ↗
69. Simulation of effects of particle size and volume fraction on al alloy strength, elongation, and toughness by using strain gradient plasticity concept10.1016/j.matdes.2010.06.026 ↗