journal article·2020-12

A different viewpoint on mechanism of fracture to shear-banding failure mode transition

Zejian Xu, Xiaodong He, Yang Han, Fenglei Huang

Publisher page

Abstract

Abstract Fracture to shear-banding failure mode transition (FMT) is an important physical phenomenon in solid materials when a fracture is subjected to dynamic loads. Since its observation, FMT has long been considered as an abrupt change, which is triggered by a critical impact velocity. However, with a novel experimental scheme and a newly-designed dynamic shear fracture specimen, we present a different viewpoint based on experimental observations that FMT is actually not an abrupt change, but a continuous evolving process of distinct microstructures dominated by a thermo-plastic mechanism. The mode II dynamic fracture toughness KIId was determined over a large range of loading rates. It's observed that with the increase of loading rates, KIId rose continuously while the failure modes changed gradually from coalescence of stretched dimples to a combination of dimples and ASBs, and then to extensive ASBs. The initiation and propagation of the fracture was also observed by a high-speed camera, and it has a good consistence with the development of the microstructures in the FMT. This discovery will provide a brand-new understanding to FMT, and lay the foundation for developing of new criteria and theories for selection of failure modes in solid materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Rock Mechanics and Modeling · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Combined stability analysis of phase-field dynamic fracture and shear band localization10.1016/j.ijplas.2017.04.018 ↗
2. Backman · 1973 · 531
3. Adiabatic shear localization
4. Analysis of failure modes in impulsively loaded pre-notched steel plates10.1016/S0749-6419(97)80001-0 ↗
5. Simulation of brittle and ductile fracture in an impact loaded prenotched plate10.1023/B:FRAC.0000026364.13365.71 ↗
6. Transient response of cracks to impact loads
7. Material instability criterion near a notch-tip under locally adiabatic deformations of thermoviscoplastic materials10.1016/S0167-8442(98)00052-4 ↗
8. Split Hopkinson (Kolsky) Bar
9. A unified phase field damage model for modeling the brittle-ductile dynamic failure mode transition in metals10.1016/j.engfracmech.2019.03.031 ↗
10. An investigation on shear fracture under impact loading
11. Stress intensity factor and fracture behavior for mode II crack specimen under high shear loading rate
12. Dormeval · 1987 · 47
13. Dynamic shear bands: an investigation using high speed optical and infrared diagnostics10.1016/S0167-6636(01)00051-5 ↗
14. Hopkinson bar loaded fracture experimental technique: a critical review of dynamic fracture toughness tests10.1115/1.3124647 ↗
15. Shadow optical analysis of dynamic shear fracture
16. Transition in the failure behavior of dynamically shear loaded cracks
17. Modes of dynamic shear failure in solids10.1023/A:1007647800529 ↗
18. Influence of loading rate on shear fracture toughness for failure mode transition10.1016/j.ijimpeng.2004.05.004 ↗
19. Kalthoff · 1988 · 185
20. Fracture initiation due to asymmetric impact loading of an edge cracked plate10.1115/1.2888289 ↗
21. Dynamic shear band propagation and micro-structure of adiabatic shear band10.1016/S0045-7825(01)00245-6 ↗
22. Modeling of failure mode switching and shear band propagation using the correspondence framework of peridynamics10.1016/j.compstruc.2018.08.007 ↗
23. On the strain and strain rate dependence of the fraction of plastic work converted to heat: an experimental study using high speed infrared detectors and the Kolsky bar10.1016/0167-6636(94)90054-X ↗
24. A unified model for metal failure capturing shear banding and fractureInt10.1016/j.ijplas.2014.08.016 ↗
25. A coupled phase field shear band model for ductile–brittle transition in notched plate impacts10.1016/j.cma.2016.02.018 ↗
26. Research on relationship between crack propagation speed of TC4 alloy and loading speed under mode II dynamic loading
27. Dynamic fracture initiation in brittle materials under combined mode I/II loading
28. Numerical modeling of the ductile-brittle transition10.1023/A:1007520917244 ↗
29. Analysis of a brittle-ductile transition under dynamic shear loading10.1016/0020-7683(94)00283-3 ↗
30. Hopkinson techniques for dynamic recovery experiments10.1098/rspa.1991.0150 ↗
31. Dynamic shear band propagation and failure in AISI 4340 Steel10.1016/j.jmatprotec.2005.03.016 ↗
32. A meshfree method based on the local partition of unity for cohesive cracks10.1007/s00466-006-0067-4 ↗
33. Discontinuous modelling of shear bands using adaptive meshfree methods10.1016/j.cma.2007.08.027 ↗
34. On the failure mode transitions in polycarbonate under dynamic mixed-mode loading10.1016/0020-7683(94)00169-W ↗
35. Failure mode transitions in polymers under high strain rate loading10.1023/A:1007581101315 ↗
36. Mode-mixity and dynamic failure mode transitions in polycarbonate10.1016/S0167-6636(98)00042-8 ↗
37. On dynamic crack initiation in polycarbonate under mixed-mode loading10.1016/S0093-6413(96)00078-X ↗
38. A study of mixed-mode dynamic crack initiation in PMMA10.1016/0093-6413(96)00047-X ↗
39. The influence of temperature on dynamic failure mode transitions10.1016/S0167-6636(98)00043-X ↗
40. Adiabatic shear localization in the impact of edge-notched specimens10.1007/BF02325743 ↗
41. Sargent · 1983
42. A method for dynamic crack and shear band propagation with phantom nodes10.1002/nme.1652 ↗
43. On the transition from adiabatic shear banding to fracture10.1016/j.mechmat.2006.03.001 ↗
44. Effect of material rate sensitivity on failure modes in the charpy V-notch test10.1016/0022-5096(86)90019-0 ↗
45. An analysis of the brittle-ductile transition in dynamic crack growth10.1007/BF00032217 ↗
46. Plastic behavior and failure mechanism of Ti-6Al-4 V under quasi-static and dynamic shear loading10.1016/j.ijimpeng.2019.04.008 ↗
47. A new method to determine dynamic fracture toughness of pure mode II at high loading rates
48. A novel method in determination of dynamic fracture toughness under mixed mode I/II impact loading10.1016/j.ijsolstr.2011.10.011 ↗
49. Application of split Hopkinson tension bar technique to study of dynamic fracture properties of materials10.1007/s10409-012-0046-2 ↗
50. Xu, Z., et al. Dynamic shear fracture toughness and failure characteristics of Ti-6Al-4 V alloy under high loading rates. submitted for publication.
51. Mode II dynamic fracture toughness of two high strength steels under high loading rate
52. A dynamic punch-through shear method for determining dynamic Mode II fracture toughness of rocks10.1016/j.engfracmech.2017.03.012 ↗
53. Dynamically propagating shear bands in impact-loaded prenotched plates-I. Experimental investigations of temperature signatures and propagation speed10.1016/0022-5096(96)00003-8 ↗
54. Dynamically propagating shear bands in impact-loaded prenotched plates-II. Numerical simulations10.1016/0022-5096(96)00004-X ↗
55. On the growth of shear bands and failure-mode transition in prenotched plates: a comparison of singly and doubly notched specimens10.1016/S0749-6419(98)00003-5 ↗