journal article·2022-02

Extended deformable tension-shear model for graphene layered materials with non-uniform staggering

Yan Chen, Huasong Qin, Huichao Liu, Langquan Shui, Yilun Liu, Xi Chen

Publisher page

Abstract

Abstract Current theoretical works on the mechanical behaviors of graphene layered materials are usually limited to the regular staggering. But, more practical staggering modes haven't been paid enough attention. In this work, we extend the deformable tension-shear (DTS) model to non-uniform staggering through two different methods, i.e. eigenvalue method and isolated break method. Then, different staggering modes such as the regular staggering with offset, stair-wise staggering, and non-uniform staggering are studied under the framework of the extended DTS model. An effective shear load transfer length l c = D h 0 / G is defined, where D is the in-plane tension stiffness of graphene, h 0 is the interlayer distance, G is the interlayer shear modulus. It is found the ratio of minimum in-plane adjacent break distance to the effective shear load transfer length Δ m i n / l c plays an important role in determining the mechanical behaviors of graphene layered materials. For example, when Δ m i n 0.5 l c the intralayer force distribution in platelet is linear which is the uniform shear strain solution of nacre-like structure, while when Δ m i n > 8 l c , the intralayer force has a long plateau away from the break and the plateau value is also the same at different platelets. Therefore, the in-plane interaction of adjacent breaks can be ignored for large size of graphene sheet, based on which the in-plane isolated break solution is derived. Then, the interlayer force concentration factor (IFCF) is analytically obtained for arbitrary N graphene layers with r aligned breaks. Further analysis indicates the in-plane isolated break solution gives the upper bound of IFCF for the uniform stair-wise staggering but may underestimate the IFCF for random staggering. The results presented herein comprehensively explore the staggering effect on mechanical behaviors of graphene layered materials which may guide the design of high-performance nacre-like materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Graphene research and applications · Force Microscopy Techniques and Applications · Nonlocal and gradient elasticity in micro/nano structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Discrete-element modeling of nacre-like materials: effects of random microstructures on strain localization and mechanical performance10.1016/j.jmps.2017.11.003 ↗
2. Fracture mechanics of nacre-like materials using discrete-element models: effects of microstructure, interfaces and randomness10.1016/j.jmps.2018.10.012 ↗
3. Designing nacre-like materials for simultaneous stiffness, strength and toughness: optimum materials, composition, microstructure and size10.1016/j.jmps.2014.08.008 ↗
4. On the mechanics of mother-of-pearl: a key feature in the material hierarchical structure10.1016/j.jmps.2006.07.007 ↗
5. Micromechanical models to guide the development of synthetic ‘brick and mortar'composites10.1016/j.jmps.2012.03.002 ↗
6. Ultratough artificial nacre based on conjugated cross-linked graphene oxide10.1002/ange.201210166 ↗
7. Mechanical properties of mother of pearl in tension
8. Mechanical behavior and properties of hydrogen bonded graphene/polymer nano-interfaces10.1016/j.compscitech.2016.09.005 ↗
9. Preparation and characterization of graphene oxide paper10.1038/nature06016 ↗
10. Structure and mechanical quality of the collagen–mineral nano-composite in bone10.1039/B402005G ↗
11. Optimizing interfacial cross-linking in graphene-derived materials, which balances intralayer and interlayer load transfer10.1021/acsami.7b04411 ↗
12. Materials become insensitive to flaws at nanoscale: lessons from nature10.1073/pnas.0631609100 ↗
13. Failure simulation and design optimization of bioinspired heterogeneous interfaces by Floquet-based bar-spring model10.1016/j.compstruct.2020.112665 ↗
14. Optimization design on simultaneously strengthening and toughening graphene-based nacre-like materials through noncovalent interaction10.1016/j.jmps.2019.103706 ↗
15. Hedgepeth · 1961
16. Local stress concentrations in imperfect filamentary composite materials10.1177/002199836700100305 ↗
17. Mechanical properties of nanostructure of biological materials10.1016/j.jmps.2004.03.006 ↗
18. A shear-lag model to account for interaction effects between inclusions in composites reinforced with rectangular platelets10.1016/S0266-3538(00)00114-7 ↗
19. Micromechanical model of nacre tested in tension10.1023/A:1017526830874 ↗
20. Modeling the tensile mechanical behavior of bone along the longitudinal direction10.1006/jtbi.2002.3120 ↗
21. Toughness of a composite in which sliding between fibers and matrix is rate-sensitive10.1016/j.eml.2021.101317 ↗
22. Fabrication of highly-aligned, conductive, and strong graphene papers using ultralarge graphene oxide sheets10.1021/nn303904z ↗
23. Optimization of damping properties of staggered composites through microstructure design10.1115/1.4040538 ↗
24. Mechanical properties of graphene papers10.1016/j.jmps.2012.01.002 ↗
25. Multimodal and self-healable interfaces enable strong and tough graphene-derived materials10.1016/j.jmps.2014.05.006 ↗
26. Characteristic lengths in natural bundle assemblies arising from fiber-matrix energy competition: a floquet-based homogenization theory10.1016/j.euromechsol.2016.07.002 ↗
27. Biological materials: structure and mechanical properties10.1016/j.pmatsci.2007.05.002 ↗
28. Optimization design of strong and tough nacreous nanocomposites through tuning characteristic lengths10.1016/j.jmps.2015.04.013 ↗
29. A continuous damage random thresholds model for simulating the fracture behavior of nacre10.1016/j.biomaterials.2005.03.013 ↗
30. Graphene oxide papers modified by divalent ions—enhancing mechanical properties via chemical cross-linking10.1021/nn700349a ↗
31. Inverse nacre-like epoxy-graphene layered nanocomposites with integration of high toughness and self-monitoring10.1016/j.matt.2019.08.013 ↗
32. Fast parallel algorithms for short-range molecular-dynamics10.1006/jcph.1995.1039 ↗
33. Mechanical properties of wrinkled graphene generated by topological defects10.1016/j.carbon.2016.07.014 ↗
34. Load redistribution near non-aligned fibre breaks in a two-dimensional unidirectional composite using break-influence superposition10.1007/BF00627024 ↗
35. A reactive potential for hydrocarbons with intermolecular interactions10.1063/1.481208 ↗
36. Ultrastrong graphene films via long-chain π-bridging10.1016/j.matt.2019.04.006 ↗
37. Nacre-inspired integrated strong and tough reduced graphene oxide–poly (acrylic acid) nanocomposites10.1039/C6NR00562D ↗
38. Design principles of high-performance graphene films: interfaces and alignment10.1016/j.matt.2020.06.023 ↗
39. Sequentially bridged graphene sheets with high strength, toughness, and electrical conductivity10.1073/pnas.1719111115 ↗
40. Use of synergistic interactions to fabricate strong, tough, and conductive artificial nacre based on graphene oxide and chitosan10.1021/acsnano.5b02902 ↗
41. Superior fatigue resistant bioinspired graphene-based nanocomposite via synergistic interfacial interactions
42. Fatigue resistant bioinspired composite from synergistic two-dimensional nanocomponents10.1021/acsnano.7b02706 ↗
43. Layered nanocomposites inspired by the structure and mechanical properties of nacre10.1039/C1CS15106A ↗
44. Deformation mechanisms in nacre10.1557/JMR.2001.0340 ↗
45. Optimal length scales emerging from shear load transfer in natural materials: application to carbon-based nanocomposite design10.1021/nn204506d ↗
46. A floquet-based bar-spring model for the dynamic modulus of bioinspired composites with arbitrary staggered architectures10.1115/1.4043888 ↗
47. Deep learning model to predict complex stress and strain fields in hierarchical composites10.1126/sciadv.abd7416 ↗
48. Graphene-based artificial nacre nanocomposites10.1039/C5CS00258C ↗
49. Mechanical properties of unidirectional nanocomposites with non-uniformly or randomly staggered platelet distribution10.1016/j.jmps.2010.07.004 ↗
50. Fusion of nacre, mussel, and lotus leaf: bio-inspired graphene composite paper with multifunctional integration10.1039/c3nr33632h ↗
51. Ultratough graphene–black phosphorus films10.1073/pnas.1916610117 ↗
52. Super-tough MXene-functionalized graphene sheets