journal article·2023-05Open access

Coupling model of electromigration and experimental verification – Part II: Impact of thermomigration

Zhen Cui, Xuejun Fan, Yaqian Zhang, Sten Vollebregt, Jiajie Fan, Guoqi Zhang

Abstract

This paper presented a comprehensive experimental and simulation study for thermomigration (TM) accompanying electromigration (EM) at elevated current densities. Both Blech and standard wafer-level electromigration acceleration test (SWEAT)-like test structures, with aluminum (Al) as a carrier, were used for testing and analysis. In Part I of our study (Cui et al., 2023a), the experimental and numerical results with the current density of 1 MA/cm2 were presented. We observed that Al stripes with a SWEAT structure did not show damage in the entire length, while Blech structures showed void and hillock formations only at the cathode and anode, respectively. The temperature gradient owing to Joule heating was neglected in our previous simulations, and the predicted results agreed well with the experimental observations. However, we have not theoretically verified the effect of the temperature gradient. In this paper, we first reported the new experimental data under the elevated current densities of 3 and 5 MA/cm2. In both Blech and SWEAT structures, the spreading of voids in the middle region of conductors was observed. Moreover, in Blech structures, voiding in the middle region occurred after a period of time when voids/hillocks were formed at the cathode and anode, while the SWEAT structures did not show damage at the two ends. Next, based on the coupled 3D theory (Cui et al., 2023a), new analytical one-dimensional (1D) solutions were derived for the Blech and SWEAT structures in the un-passivated configuration considering TM. We found that TM played a significant role in the EM development in the middle of conductors under the elevated current density. The numerical results were in excellent agreement with the experimental data with the consideration of TM. We further established new EM failure's threshold criteria for the SWEAT structures in the form of the product of current density and square of conductor length. This is a major departure from the original Blech's theory in which only mechanical stress gradient was considered. We also studied the acceleration factor of the current density exponent and presented an insight into failure mechanisms associated with TM.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Thermomigration versus electromigration in microelectronics solder joints10.1109/TADVP.2009.2018293 ↗
2. Electromigration damage of grain-boundary triple points in Al thin films10.1063/1.1660116 ↗
3. Stress generation by electromigration10.1063/1.89024 ↗
4. Electromigration in thin Al films10.1063/1.1657425 ↗
5. Measurement of stress gradients generated by electromigration10.1063/1.89414 ↗
6. Electromigration in thin aluminum films on titanium nitride10.1063/1.322842 ↗
7. Cahn · 1996
8. A comprehensive TCAD approach for assessing electromigration reliability of modern interconnects10.1109/TDMR.2008.2000893 ↗
9. Microstructure and stress aspects of electromigration modeling
10. Thermomigration in solder joints10.1016/j.mser.2012.11.001 ↗
11. Thermomigration in solder joints10.1016/j.mser.2012.11.001 ↗
12. Electromigration and thermomigration in Pb-free flip-chip solder joints10.1146/annurev.matsci.38.060407.130253 ↗
13. Failure induced by thermomigration of interstitial Cu in Pb-free flip chip solder joints
14. Thermomigration of Ti in flip-chip solder joints10.1016/j.scriptamat.2012.01.020 ↗
15. Electro-thermomigration in Al/Si, Au/Si interdigitized test structures10.1063/1.1662692 ↗
16. The effect of atomic density gradient in electromigration10.1504/IJMSI.2012.046186 ↗
17. Cui, Z., 2021. Multi-Physics Driven Electromigration Study: Multi-Scale Modeling and Experiment, Ph.D. Dissertation. Delft University of Technology.
18. General coupling model for electromigration and one-dimensional numerical solutions10.1063/1.5065376 ↗
19. Implementation of general coupling model of electromigration in ANSYS
20. Molecular dynamic study for concentration-dependent volume relaxation of vacancy10.1016/j.microrel.2021.114127 ↗
21. Cui, Z., Fan, X., Zhang, Y., Vollebregt, S.F., Jiajie, Zhang, G., 2023a. Coupling Model of Electromigration and Experimental Verification – Part I: effect of Atomic Concentration Gradient. Preceding paper.10.1016/j.jmps.2023.105257 ↗
22. Effect of thermomigration on electromigration
23. Effects of temperature and grain size on diffusivity of aluminium: electromigration experiment and molecular dynamic simulation10.1088/1361-648X/ac4b7f ↗
24. Electromigration and failure in electronics: an introduction10.1109/PROC.1971.8447 ↗
25. Dandu · 2011 · 2192
26. Wafer-level electromigration tests on NIST and SWEAT structures
27. Current and temperature distribution impact on electromigration failure location in SWEAT structure
28. Electromigration lifetime and critical void volume10.1063/1.1821631 ↗
29. Electromigration-induced compressive stresses in encapsulated thin-film conductors
30. Thermomigration in Pb-free SnAg solder joint under alternating current stressing10.1063/1.3089872 ↗
31. Electromigration in two-level interconnects of Cu and Al alloys10.1016/0254-0584(95)01505-1 ↗
32. Electromigration in two-level interconnect structures with Al alloy lines and W studs10.1063/1.352335 ↗
33. Electromigration in Al (Cu) two-level structures: effect of Cu and kinetics of damage formation10.1063/1.354839 ↗
34. Effect of the combination of electromigration and thermomigration on phase migration and partial melting in flip chip composite SnPb solder joints10.1063/1.2227621 ↗
35. Characterization of nanoscale temperature fields during electromigration of nanowires
36. Kijkanjanapaiboon, K., 2017. Modeling of Electromigration and Lock-In Thermography in Microelectronics and Microelectronics Packaging. Ph.D Dissertation. Lamar University.
37. Stress and electromigration in Al-lines of integrated circuits10.1016/0956-7151(92)90305-X ↗
38. Stress evolution due to electromigration in confined metal lines10.1063/1.354073 ↗
39. situ TEM and STEM studies of reversible electromigration in thin palladium–platinum bridges10.1088/0957-4484/24/50/505708 ↗
40. Current density and line width effects in electromigration: a new damage-based lifetime model10.1016/S1359-6454(97)00245-0 ↗
41. Quantitative analysis of electromigration damage in Al-based conductor lines10.1557/JMR.1997.0272 ↗
42. In situ scanning electron microscope comparison studies on electromigration of Cu and Cu (Sn) alloys for advanced chip interconnects10.1063/1.359851 ↗
43. Comparison of isothermal, constant current and SWEAT wafer level EM testing methods
44. Athermal and thermal coupling electromigration effects on the microstructure and failure mechanism in advanced fine-pitch Cu interconnects under extremely high current density10.1016/j.matchemphys.2020.123680 ↗
45. Electromigration reliability of advanced high-density fan-out packaging with fine-pitch 2-/2-μm L/S Cu redistribution lines10.1109/TCPMT.2020.2997824 ↗
46. Liu · 2017 · 223
47. Electromigration and mechanical stress10.1016/S0167-9317(99)00429-3 ↗
48. Sitzungsberichte der Kaiserlichen Akademie der Wissenschaften
49. Diffusion of Au and Cu in a temperature gradient10.1063/1.1702479 ↗
50. Growth of electromigration-induced hillocks in Al interconnects10.1557/JMR.2002.0394 ↗
51. Thermomigration in solid metals10.1016/0022-3697(69)90315-1 ↗
52. Soret effect in interacting micellar solutions10.1103/PhysRevLett.88.208302 ↗
53. The Soret effect: a review of recent experimental results10.1115/1.1992517 ↗
54. Plasticity of electromigration-induced hillocking and its effect on the critical length10.1063/1.1476080 ↗
55. Electromigration threshold in damascene versus plasma-etched interconnects10.1063/1.122578 ↗
56. Thermodiffusion or Soret effect: historical review10.1016/j.ijheatmasstransfer.2014.02.057 ↗
57. The effect of anodization on the electromigration drift velocity in aluminum films10.1063/1.344266 ↗
58. General model for mechanical stress evolution during electromigration10.1063/1.371169 ↗
59. Reproducibility of electromigration measurements10.1109/T-ED.1987.22979 ↗
60. Atomic-scale investigation of electromigration with different directions of electron flow into high-density nanotwinned copper through in situ HRTEM10.1016/j.actamat.2021.117250 ↗
61. Thermomigration induced microstructure and property changes in Sn-58Bi solders10.1016/j.matdes.2019.107619 ↗
62. Inverse Blech Length Phenomenon in Thin-Film Stripes10.1103/PhysRevApplied.10.054052 ↗
63. Resistance behaviour and morphological changes during electromigration in gold wires10.1088/0953-8984/19/4/046210 ↗
64. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool
65. A model for electromigration-induced degradation mechanisms in dual-inlaid copper interconnects: effect of interface bonding strength10.1063/1.1805188 ↗
66. A model for electromigration-induced degradation mechanisms in dual-inlaid copper interconnects: effect of microstructure10.1063/1.2775538 ↗
67. Thermal diffusion of vacancies in aluminum10.1016/0001-6160(67)90198-8 ↗
68. Electromigration in ULSI interconnects10.1016/j.mser.2007.04.002 ↗
69. Recent advances on electromigration in very-large-scale-integration of interconnects10.1063/1.1611263 ↗
70. Effect of Joule heating and current crowding on electromigration in mobile technology10.1063/1.4974168 ↗
71. Thermomigration in indium and indium alloy films10.1063/1.336190 ↗
72. Computational damage mechanics of electromigration and thermomigration10.1063/1.4821015 ↗
73. Thermomigration in Pb–Sn solder joints under joule heating during electric current stressing10.1063/1.1554775 ↗