journal article·2023-09Open access

A coupled approach to predict cone-cracks in spherical indentation tests with smooth or rough indenters

M.R. Marulli, J. Bonari, J. Reinoso, M. Paggi

Abstract

Indentation tests are largely exploited in experiments to characterize the mechanical and fracture properties of the materials from the resulting crack patterns. This work proposes an efficient theoretical and computational framework, whose implementation is detailed for 2D axisymmetric and for 3D geometries, to simulate indentation-induced cracking phenomena caused by non-conforming contacts with indenter profiles of an arbitrary shape. The formulation hinges on the coupling of the MPJR (eMbedded Profile for Joint Roughness) interface finite elements which embed the indenter profile to efficiently solve the contact problem between non-planar bodies, and the phase-field model for brittle fracture to simulate crack evolution and nonlocal damage in the substrate. The novel framework is applied to predict cone-crack formation in the case of indentation tests with smooth spherical indenters, with validation against experimental data. Then, the methodology is employed for the very first time in the literature to assess the effect of surface roughness superimposed on the shape of the smooth spherical indenter. In terms of physical insights, numerical predictions quantify the dependencies of the critical load for crack nucleation and the crack radius on the amplitude of roughness in comparison with the behavior of smooth indenters. Again, the consistency with available experimental trends is noticed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Numerical methods in engineering · Metal and Thin Film Mechanics · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Phase-field modeling of ductile fracture10.1007/s00466-015-1151-4 ↗
2. Regularized formulation of the variational brittle fracture with unilateral contact: Numerical experiments10.1016/j.jmps.2009.04.011 ↗
3. On the absolute measurement of hardness
4. Viscoelastic effects during tangential contact analyzed by a novel finite element approach with embedded interface profiles10.3390/lubricants8120107 ↗
5. A new finite element paradigm to solve contact problems with roughness10.1016/j.ijsolstr.2022.111643 ↗
6. A framework for the analysis of fully coupled normal and tangential contact problems with complex interfaces10.1016/j.finel.2021.103605 ↗
7. Numerical experiments in revisited brittle fracture10.1016/S0022-5096(99)00028-9 ↗
8. Modeling complex crack paths in ceramic laminates: A novel variational framework combining the phase field method of fracture and the cohesive zone model10.1016/j.jeurceramsoc.2018.01.035 ↗
9. Failure through crack propagation in components with holes and notches: An experimental assessment of the phase field model10.1016/j.ijsolstr.2022.111798 ↗
10. Hertzian fracture of pyrex glass under quasi-static loading conditions10.1007/BF00549324 ↗
11. A multi phase-field fracture model for long fiber reinforced composites based on the puck theory of failure
12. Dynamic crack initiation assessment with the coupled criterion10.1016/j.euromechsol.2021.104483 ↗
13. Revisiting brittle fracture as an energy minimization problem10.1016/S0022-5096(98)00034-9 ↗
14. VI The phenomena of rupture and flow in solids
15. In-situ strength effects in long fibre reinforced composites: A micro-mechanical analysis using the phase field approach of fracture10.1016/j.tafmec.2020.102621 ↗
16. Mechanical properties of glass10.1007/978-3-319-93728-1_7 ↗
17. Hahn · 2021
18. The determination of the flaw distributions on various glass surfaces from hertz fracture experiments10.1016/0022-5096(70)90030-X ↗
19. Hertz · 1882
20. The contributions of David Tabor to the science of indentation hardness10.1557/jmr.2009.0085 ↗
21. Johanns · 2014
22. The effect of the indenter elasticity on the hertzian fracture of brittle materials
23. A study of the fundamental mechanisms of erosion using hertzian fracture tests10.1016/0043-1648(93)90087-3 ↗
24. Phase field modeling of hertzian cone cracks under spherical indentation10.1007/s11223-021-00251-9 ↗
25. Using the hertzian fracture system to measure crack growth data: A review10.1023/B:FRAC.0000005343.74494.7e ↗
26. Angle of hertzian cone cracks10.1111/j.1151-2916.1998.tb02542.x ↗
27. Kumar · 2022
28. Indentation of ceramics with spheres: A century after Hertz10.1111/j.1151-2916.1998.tb02580.x ↗
29. Glass thickness and fragmentation behavior in stressed glasses10.4236/njgc.2012.24020 ↗
30. Strength or toughness? A criterion for crack onset at a notch10.1016/S0997-7538(01)01184-6 ↗
31. What is the tensile strength of a ceramic to be used in numerical models for predicting crack initiation?10.1007/s10704-018-0294-7 ↗
32. A study of the mechanisms of erosion in silicon single crystals using hertzian fracture tests10.1016/0043-1648(95)07128-8 ↗
33. A length scale insensitive anisotropic phase field fracture model for hyperelastic composites
34. Spherical indentation for brittle fracture toughness evaluation by considering kinked-cone-crack10.1016/j.jeurceramsoc.2016.08.014 ↗
35. A combined phase-field and cohesive zone model approach for crack propagation in layered structures made of nonlinear rubber-like materials10.1016/j.cma.2022.115007 ↗
36. Phase field modeling of ductile fracture at finite strains: A variational gradient-extended plasticity-damage theory10.1016/j.ijplas.2016.04.011 ↗
37. Phase field modeling of fracture in rubbery polymers, part I: Finite elasticity coupled with brittle failure10.1016/j.jmps.2013.06.007 ↗
38. Thermodynamically consistent phase-fieldmodels of fracture: Variational principles and multi-field FE implementations10.1002/nme.2861 ↗
39. Fracture indentation beneath flat and spherical punches10.1007/BF00559324 ↗
40. Abaqus implementation of phase-field model for brittle fracture10.1016/j.commatsci.2014.05.071 ↗
41. The coefficient of proportionality κ between real contact area and load, with new asperity models10.1016/j.wear.2009.12.038 ↗
42. A variational approach with embedded roughness for adhesive contact problems10.1080/15376494.2018.1525454 ↗
43. Node-to-segment and node-to-surface interface finite elements for fracture mechanics10.1016/j.cma.2015.11.023 ↗
44. Dual mortar methods for computational contact mechanics–overview and recent developments10.1002/gamm.201410004 ↗
45. The mechanics of indentation fracture in poly(methyl methacrylate)10.1088/0022-3727/11/4/022 ↗
46. A consistent interface element formulation for geometrical and material nonlinearities10.1007/s00466-014-1077-2 ↗
47. Phase field modeling of brittle fracture for enhanced assumed strain shells at large deformations: Formulation and finite element implementation10.1007/s00466-017-1386-3 ↗
48. Strength of poly(methyl methacrylate) with indentation flaws10.1007/BF01111890 ↗
49. Indentation hardness of glass as an energy scaling law10.1088/0370-1301/69/1/307 ↗
50. Rupture of 3D-printed hyperelastic composites: Experiments and phase field fracture modeling10.1016/j.jmps.2020.103941 ↗
51. Characterisation of the scratch resistance of annealed and tempered architectural glass10.1016/j.tsf.2011.04.104 ↗
52. Analysis of hertzian indentation fracture in the framework of finite fracture mechanics10.1007/s10704-017-0201-7 ↗
53. Analysis of hertzian indentation fracture using a phase field approach10.1002/pamm.201900257 ↗
54. Phase field modeling of hertzian indentation fracture10.1016/j.jmps.2020.104026 ↗
55. Chapter 5 - mixed mode fracture
56. Crack nucleation in variational phase-field models of brittle fracture10.1016/j.jmps.2017.09.006 ↗
57. Fracture of glass by spherical indenters10.1088/0370-1301/69/1/306 ↗
58. Wriggers · 2006
59. Crack nucleation and propagation in the phase-field cohesive zone model with application to hertzian indentation fracture10.1016/j.ijsolstr.2022.111462 ↗
60. Phase-field modelling of fracture10.1016/bs.aams.2019.08.001 ↗
61. Two dimensional mortar contact methods for large deformation frictional sliding10.1002/nme.1222 ↗
62. Zienkiewicz · 2013