Processing induced size effects in plastic yielding upon miniaturisation
Source abstract
Abstract
Size effects in metals have received considerable attention in literature in the last decades. For preparing specimens dedicated processing techniques, such as laser-cutting, micro-milling, turning, etc., are used. Most of these processing methods intrinsically damage crystals just below the worked surface. In macroscopic applications, the effect on the overall mechanical behaviour can safely be neglected in most cases. Upon miniaturisation, however, the influence of the affected region becomes more important and may induce a processing induced size effect, which is far from negligible. Processing induced size effects are analysed by carefully characterising the plastic yielding in uniaxial tension of rectangular, 300 micrometer thick aluminium sheet specimens, with a well-defined homogeneous microstructure containing through-thickness grains. The specimens are processed to different widths by three independent machining techniques: (1) laser-cutting, (2) mechanical cutting, and (3) extensive grinding from a larger width. These independent techniques all result in a distinct processing induced size effect upon miniaturisation, i.e. an increase of up to 200% in yield stress for a decrease from about 12 to 3 grains over the specimen width. Using a simple Taylor averaging model, it is shown that the yield stress in the affected edge region increased to 210¿350% of its initial (or bulk) value. In addition, it is found that even a prolonged anneal near the melting temperature can only partially remove the processing induced size effect. The results clearly demonstrate that processing induced size effects have to be considered in the design of miniaturised devices and parts as well as in scientific research relying on the testing of manufactured small-scale test specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Microstructural study of CO2 laser machined heat affected zone of 2024 aluminum alloy10.1016/S0169-4332(02)01375-2 ↗
2. The plastic deformation of polycrystalline aggregates10.1080/14786436208201857 ↗
3. Size effects in materials due to microstructural and dimensional constraints: a comparative review10.1016/S1359-6454(98)00231-6 ↗
4. A comparison of dislocation induced back stress formulations in strain gradient crystal plasticity10.1016/j.ijsolstr.2006.05.011 ↗
5. A three-dimensional dislocation field crystal plasticity approach applied to miniaturized structures10.1080/14786430600965107 ↗
6. Recovery during stress relaxation testing of aluminum at 298K10.1016/0036-9748(76)90210-6 ↗
7. Cahn, R.W., 1965. Physical Metallurgy. North-Holland, Amsterdam.
8. Applications of digital-image-correlation techniques to experimental mechanics10.1007/BF02325092 ↗
9. A review of deformation and fatigue of metals at small size scales10.1111/j.1460-2695.2005.00951.x ↗
10. Scale dependent crystal plasticity framework with dislocation density and grain boundary effects10.1016/j.ijsolstr.2004.04.021 ↗
11. Strain gradient plasticity10.1016/S0065-2156(08)70388-0 ↗
12. Laser micromachining of sputtered DLC films10.1016/j.apsusc.2005.06.054 ↗
13. Size effects from grain statistics in ultra-thin metal sheets10.1016/j.jmatprotec.2006.01.006 ↗
14. Size effects in miniaturized polycrystalline FCC samples: strengthening versus weakening10.1016/j.ijsolstr.2006.05.009 ↗
15. Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients10.1016/j.actamat.2004.12.031 ↗
16. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
17. Discrete dislocation dynamics simulations of surface induced size effects in plasticity10.1016/j.msea.2005.09.075 ↗
18. Statistical size effects based on grain size and texture in thin sheets10.1016/j.msea.2006.11.113 ↗
19. Humphreys, J.F., 1991. Materials Science and Technolgy: Processing of Metals and Alloys, vol. 15. VCH, Weinheim, New York, Basel, Cambridge.
20. An experimental assessment of grain size effects in the uniaxial straining of thin Al sheet with a few grains across the thickness10.1016/j.msea.2005.12.029 ↗
21. Material behaviour in metal cutting: strains, strain rates and temperatures in chip formation10.1016/S0924-0136(01)01227-4 ↗
22. Development of micro punching system10.1016/S0007-8506(07)62102-7 ↗
23. Kals, R.T.A., 1998. Fundamentals on the miniaturisation of sheet metal working processes. Ph.D. Thesis, Friedrich-Alexander-Universität, Lehrstuhl für Fertigungstechnologie.
24. Miniaturization in sheet metal working10.1016/S0924-0136(00)00391-5 ↗
25. Laser microprocessing of metallic stent for medical therapy10.1016/j.jmatprotec.2005.05.041 ↗
26. Assessment of influence of some process parameters on sheet metal blanking10.1016/S0924-0136(99)00486-0 ↗
27. Metal Industries Research & Development (MIRDC) Research report, 2004.
28. Effect of specimen thickness on mechanical properties of polycrystalline aggregates with various grain sizes10.1016/0001-6160(79)90120-2 ↗
29. Application of the EBSD technique for the characterisation of deformation zones in metal cutting
30. Size effects in polycrystalline thin films analyzed by discrete dislocation plasticity10.1016/j.tsf.2004.12.012 ↗
31. ELID-grinding of microtool and applications to fabrication of microcomponents10.1504/IJMPT.2003.002505 ↗
32. Microfactory—concept, history, and developments10.1115/1.1823491 ↗
33. Observations on the structural changes accompanying recovery in super-purity aluminium10.1016/0001-6160(54)90091-7 ↗
34. The cleavage strength of polycrystals
35. Petzow · 1999
36. The nature of mechanically polished metal surfaces: the surface deformation produced by the abrasion and polishing of 70:30 brass
37. Boundary layers in constrained plastic flow: comparison of nonlocal and discrete dislocation plasticity10.1016/S0022-5096(00)00074-0 ↗
38. A microbend test method for measuring the plasticity length scale10.1016/S1359-6454(98)00153-0 ↗
39. Deformation behaviour of aluminium single crystals in ultraprecision diamond turning10.1016/S0924-0136(01)00667-7 ↗
40. Factors affecting workpiece deformation during grinding10.1016/0025-5416(75)90223-2 ↗
41. On the modeling and analysis of machining performance in micro-endmilling, part I: Surface generation10.1115/1.1813470 ↗
42. Contact area and size effects in discrete dislocation modeling of wedge indentation10.1557/jmr.2007.0090 ↗
43. Implications of high strain deformation in grinding10.1016/S0043-1648(99)00205-7 ↗
44. World Technology Evaluation Center (WTEC) Panel report, 2005. International Assessment of Research and Development in Micromanufacturing.
45. Laser cutting quality assessment and thermal efficiency analysis10.1016/j.jmatprotec.2004.04.194 ↗