journal article·2019-01Open access

Microstructural constitutive model for polycrystal viscoplasticity in cold and warm regimes based on continuum dislocation dynamics

S. Amir H. Motaman, Ulrich Prahl

Abstract

Viscoplastic flow of polycrystalline metallic materials is the result of motion and interaction of dislocations, line defects of the crystalline structure. In the microstructural (physics-based) constitutive model presented in this paper, the main underlying microstructural processes influencing viscoplastic deformation and mechanical properties of metals in cold and warm regimes are statistically described by the introduced sets of postulates/axioms for continuum dislocation dynamics (CDD). Three microstructural (internal) state variables (MSVs) are used for statistical quantifications of different types/species of dislocations by the notion of dislocation density. Considering the mobility property of dislocations, they are categorized to mobile and (relatively) immobile dislocations. Mobile dislocations carry the plastic strain (rate), while immobile dislocations contribute to plastic hardening. Moreover, with respect to their arrangement, dislocations are classified to cell and wall dislocations. Cell dislocations are those that exist inside cells/subgrains, and wall dislocations are packed in (and consequently formed) the subgrain walls/boundaries. Therefore, the MSVs incorporated in this model are cell mobile, cell immobile and wall immobile dislocation densities. The evolution of these internal variables is calculated by means of adequate equations that characterize the dislocation processes dominating material behavior during cold and warm monotonic viscoplastic deformation. The constitutive equations are then numerically integrated; and the constitutive parameters are determined/fitted for a widely used ferritic-pearlitic steel (20MnCr5).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Analytical and experimental determination of the material intrinsic length scale of strain gradient plasticity theory from micro- and nano-indentation experiments10.1016/j.ijplas.2003.10.007 ↗
2. The mesostructure—properties linkage in polycrystals10.1016/S0079-6425(98)00002-4 ↗
3. A physical model of the twinning-induced plasticity effect in a high manganese austenitic steel10.1016/j.msea.2004.01.060 ↗
4. Dislocation dynamics. I. A proposed methodology for deformation micromechanics10.1103/PhysRevB.41.6958 ↗
5. Current theoretical approaches to collective behavior of dislocations10.1016/j.physrep.2006.10.003 ↗
6. A model based on nonlinear oscillations to explain jumps on creep curves10.1088/0022-3727/14/11/015 ↗
7. A dislocation density based crystal plasticity finite element model: application to a two-phase polycrystalline HCP/BCC composites10.1016/j.jmps.2014.01.006 ↗
8. Argon · 2012
9. Climb of extended edge dislocations10.1016/0001-6160(81)90156-5 ↗
10. On the evolution of crystallographic dislocation density in non-homogeneously deforming crystals10.1016/j.jmps.2003.12.007 ↗
11. Enabling strain hardening simulations with dislocation dynamics10.1088/0965-0393/15/6/001 ↗
12. Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density10.1016/S1359-6454(99)00020-8 ↗
13. Modeling the evolution of crystallographic dislocation density in crystal plasticity10.1016/S0022-5096(01)00134-X ↗
14. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
15. A stochastic crystal plasticity framework for deformation of micro-scale polycrystalline materials10.1016/j.ijplas.2014.11.001 ↗
16. A study of the hot and cold deformation of twin-roll cast magnesium alloy AZ3110.1080/14786435.2013.853884 ↗
17. A dislocation-based constitutive model for viscoplastic deformation of FCC metals at very high strain rates10.1016/j.ijplas.2010.03.002 ↗
18. Dislocation density based model for plastic deformation and globularization of Ti-6Al-10.1016/j.ijplas.2013.04.003 ↗
19. The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver10.1080/14786436008238300 ↗
20. On a proposal for a continuum with microstructure10.1007/BF01295573 ↗
21. A deformation theory of strain gradient crystal plasticity that accounts for geometrically necessary dislocations10.1016/j.jmps.2005.08.003 ↗
22. Overview no. 96 evolution of f.c.c. deformation structures in polyslip10.1016/0956-7151(92)90296-Q ↗
23. Deformation structures in lightly rolled pure aluminium10.1016/0921-5093(89)90325-0 ↗
24. A dislocation model for the stress-strain behaviour of polycrystalline α-Fe with special emphasis on the variation of the densities of mobile and immobile dislocations10.1016/0025-5416(70)90081-9 ↗
25. A dislocation-based constitutive law for pure Zr including temperature effects10.1016/j.ijplas.2007.07.017 ↗
26. Scale effects in friction using strain gradient plasticity and dislocation-assisted sliding (microslip)10.1016/S1359-6454(03)00261-1 ↗
27. Understanding creep—a review10.1007/s11661-002-0090-9 ↗
28. Thermo-mechanical-metallurgical modeling for hot-press forming in consideration of the prior austenite deformation effect10.1016/j.ijplas.2013.12.002 ↗
29. Modelling of TWIP effect on work-hardening10.1016/S0921-5093(00)02019-0 ↗
30. A dislocation density based strain gradient model10.1016/j.ijplas.2006.01.005 ↗
31. A dipole model for the cross-slip of screw dislocations in fee metals
32. Gradient-dependent deformation of two-phase single crystals10.1016/S0022-5096(00)00006-5 ↗
33. A continuum theory for dynamic recrystallization with microstructure-related length scales10.1016/S0749-6419(98)00008-4 ↗
34. On the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless steels10.1016/S1359-6454(03)00117-4 ↗
35. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
36. Unraveling the temperature dependence of the yield strength in single-crystal tungsten using atomistically-informed crystal plasticity calculations10.1016/j.ijplas.2015.09.002 ↗
37. Hierarchical multiscale modeling of plasticity in copper: from single crystals to polycrystalline aggregates10.1016/j.ijplas.2017.10.014 ↗
38. Discrete dislocation density modelling of single phase FCC polycrystal aggregates10.1016/j.actamat.2004.08.044 ↗
39. Deformation twinning10.1016/0079-6425(94)00007-7 ↗
40. Modeling dislocations and disclinations with finite micropolar elastoplasticity10.1016/j.ijplas.2004.12.001 ↗
41. A comparative discrete-dislocation/nonlocal crystal-plasticity analysis of plane-strain mode I fracture10.1016/S0921-5093(01)01397-1 ↗
42. Cottrell · 1953
43. Dislocation theory of yielding and strain ageing of iron10.1088/0370-1298/62/1/308 ↗
44. Dislocation avalanches, strain bursts, and the problem of plastic forming at the micrometer scale10.1126/science.1143719 ↗
45. Controlling strain bursts and avalanches at the nano- to micrometer scale10.1103/PhysRevLett.117.155502 ↗
46. Temperature insensitivity of the flow stress in body-centered cubic micropillar crystals10.1016/j.actamat.2016.02.008 ↗
47. Influence of loading control on strain bursts and dislocation avalanches at the nanometer and micrometer scale10.1103/PhysRevB.95.064103 ↗
48. Micro-plasticity and intermittent dislocation activity in a simplified micro-structural model10.1088/0965-0393/21/3/035007 ↗
49. Mesoscopic simulations of plastic deformation10.1016/S0921-5093(00)01725-1 ↗
50. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
51. Bridging steady-state deformation behavior at low and high temperature by considering dislocation dipole annihilation10.1016/j.msea.2005.01.069 ↗
52. The role of the weakest-link mechanism in controlling the plasticity of micropillars10.1016/j.jmps.2008.10.004 ↗
53. Theories of nonlocal plasticity10.1016/0020-7225(83)90058-7 ↗
54. Annihilation of dislocations during tensile and cyclic deformation and limits of dislocation densities10.1080/01418617908234871 ↗
55. A dislocation density based constitutive model for cyclic deformation10.1115/1.2805940 ↗
56. Local strain hardening and nonuniformity of plastic deformation10.1016/0001-6160(86)90148-3 ↗
57. A unified phenomenological description of work hardening and creep based on one-parameter models10.1016/0001-6160(84)90202-5 ↗
58. A remark in connection with ‘direct versus indirect dispersion hardening’10.1016/0956-716X(92)90355-I ↗
59. A dislocation-based model for all hardening stages in large strain deformation10.1016/S1359-6454(98)00196-7 ↗
60. Scale dependent crystal plasticity framework with dislocation density and grain boundary effects10.1016/j.ijsolstr.2004.04.021 ↗
61. Internal-state-variable based self-consistent constitutive modeling for hot working of two-phase titanium alloys coupling microstructure evolution10.1016/j.ijplas.2011.05.008 ↗
62. Review of experimental techniques for high rate deformation and shock studies10.1016/j.ijimpeng.2004.03.005 ↗
63. Strain Gradient Plasticity
64. Strain gradient plasticity: theory and experiment10.1016/0956-7151(94)90502-9 ↗
65. Rapid solution hardening, dislocation mobility, and the flow stress of crystals10.1063/1.1702437 ↗
66. A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable10.1016/0001-6160(88)90030-2 ↗
67. The concepts of latent hardening and strain hardening in metallic single crystals10.1016/0001-6160(85)90154-3 ↗
68. Multiplication processes for slow moving dislocations10.1103/PhysRev.79.722 ↗
69. Microstructure-sensitive modelling of dislocation creep in polycrystalline FCC alloys: Orowan theory revisited10.1016/j.msea.2015.10.088 ↗
70. Dislocation annihilation in plastic deformation: II. Kocks–Mecking Analysis10.1016/j.actamat.2012.01.028 ↗
71. Mechanism-based strain gradient plasticity: I. Theory10.1016/S0022-5096(98)00103-3 ↗
72. Taylor-based nonlocal theory of plasticity10.1016/S0020-7683(00)00173-6 ↗
73. Geometrically necessary dislocation and size-dependent plasticity10.1016/S1359-6462(02)00329-9 ↗
74. Modeling plasticity at the micrometer scale10.1007/s001140050665 ↗
75. EBSD-based continuum dislocation microscopy10.1016/j.ijplas.2010.05.008 ↗
76. The isotropic shear modulus of multicomponent Fe-base solid solutions10.1016/S1359-6454(02)00096-4 ↗
77. Stress and temperature dependence of screw dislocation mobility in α -Fe by molecular dynamics10.1103/PhysRevB.84.174103 ↗
78. Dislocation Mobility in Crystals10.1063/1.1702950 ↗
79. Dislocation theory of steady state deformation and its approach in creep and dynamic tests10.1016/0001-6160(87)90007-1 ↗
80. Comparing the strength of f.c.c. and b.c.c. sub-micrometer pillars: compression experiments and dislocation dynamics simulations10.1016/j.msea.2007.08.093 ↗
81. Multiscale modeling of the plasticity in an aluminum single crystal10.1016/j.ijplas.2008.11.003 ↗
82. Three-dimensional formulation of dislocation climb10.1016/j.jmps.2015.04.002 ↗
83. A model for yielding with special reference to the yield-point phenomena of iron and related bcc metals10.1016/0001-6160(62)90041-X ↗
84. Dislocation dynamics and work hardening of fractal dislocation cell structures10.1016/S0921-5093(99)00527-4 ↗
85. Hall, E.O., 1970. Yield point phenomena in metals and alloys. Plenum Press, New York, 1 online resource (viii, 296.10.1007/978-1-4684-1860-6 ↗
86. A dislocation-based multi-rate single crystal plasticity model10.1016/j.ijplas.2012.12.006 ↗
87. On dislocation interactions in the fcc Lattice10.1063/1.1736074 ↗
88. Hirth, J.P., Lothe, J., 1982. Theory of dislocations, 2nd ed. Krieger Pub. Co, Malabar FL, xii, 857.10.1115/1.3167075 ↗
89. Continuum dislocation dynamics: towards a physical theory of crystal plasticity10.1016/j.jmps.2013.09.012 ↗
90. Large strain deformation of polycrystalline metals at low homologous temperatures10.1016/0022-5096(75)90018-6 ↗
91. Historical review of internal state variable theory for inelasticity10.1016/j.ijplas.2010.06.005 ↗
92. Discrete dislocation dynamics modelling of mechanical deformation of nickel-based single crystal superalloys10.1016/j.ijplas.2011.07.003 ↗
93. A conventional theory of mechanism-based strain gradient plasticity10.1016/j.ijplas.2003.08.002 ↗
94. Geometrically necessary boundaries, incidental dislocation boundaries and geometrically necessary dislocations10.1016/S1359-6462(02)00358-5 ↗
95. Microstructural evolution in a non-cell forming metal: Al⋅Mg10.1016/0956-7151(93)90251-M ↗
96. Microstructural evolution in nickel during rolling from intermediate to large strains10.1007/BF02666337 ↗
97. Metal forming at the center of excellence for the synthesis and processing of advanced materials10.1007/s11837-998-0122-z ↗
98. Hull · 2011
99. Analytic model of the remobilization of pinned glide dislocations from quasi-static to high strain rates10.1016/j.ijplas.2015.01.008 ↗
100. Measurement of geometrically necessary dislocation density with high resolution electron backscatter diffraction: effects of detector binning and step size10.1016/j.ultramic.2012.11.003 ↗