Bifurcation into a localized mode from non-uniform periodic deformations around a periodic pattern of voids
Source abstract
Abstract
Abstract Bifurcation into a shear band is studied for a porous ductile material subject to a combination of shear loading and tensile or compressive loading in different directions. The material with a periodic array of voids is studied by numerical solutions for a plane strain unit cell model with fully periodic boundary conditions. The fundamental pre-bifurcation solution has been studied before, with focus on ductile fracture under conditions of low stress triaxiality. In the previous studies it has been shown that voids in shear are flattened out to micro-cracks, which rotate and elongate until interaction with neighboring micro-cracks gives coalescence. These failure mechanisms are included in the present study, but here the focus is on the possibility that failure may occur earlier, if bifurcation leads to a shear band crossing over many cells, where the plastic strains inside the band will grow very large, while the overall strains in the material will not increase any further. The unit cell analysis with full periodicity is used both inside and outside the band to find the average behavior in the two material regions. This does not allow for point-wise satisfaction of compatibility and equilibrium along the interface between the two regions, but these conditions can be satisfied on the average. The bifurcation analysis includes determination of the direction along which a shear band is first critical.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Vibration and Dynamic Analysis · Composite Structure Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. On fracture locus in the equivalent strain and stress triaxiality space10.1016/j.ijmecsci.2004.02.006 ↗
2. Rupture mechanisms in combined tension and shear – micromechanics10.1016/j.ijsolstr.2007.01.010 ↗
3. Rupture mechanisms in combined tension and shear – experiments10.1016/j.ijsolstr.2006.09.031 ↗
4. Partially coupled anisotropic fracture model for aluminum sheets10.1016/j.engfracmech.2010.02.024 ↗
5. Ductile fracture by void growth to coalescence10.1016/S0065-2156(10)44003-X ↗
6. Effect of contact conditions on void coalescence at low stress triaxiality shearing10.1115/1.4005565 ↗
7. Influence of the Lode parameter and the stress triaxiality on the failure of elasto-plastic porous materials10.1016/j.ijsolstr.2012.02.006 ↗
8. Optimized butterfly specimen for the fracture testing of sheet materials under combined normal and shear loading10.1016/j.engfracmech.2011.08.008 ↗
9. Softening by void nucleation and growth in tension and shear10.1016/0022-5096(89)90027-6 ↗
10. Ductile fracture10.1016/0022-3697(87)90118-1 ↗
11. Ductile failure in polycrystalline aluminum alloy Al 6061-T6 under shear dominant loading10.1007/s10704-012-9793-0 ↗
12. Continuum theory of ductile rupture by void nucleation and growth – I. Yield criteria and flow rules for porous ductile media10.1115/1.3443401 ↗
13. Ductile failure under combined shear and tension10.1016/j.ijsolstr.2012.12.009 ↗
14. A general theory of uniqueness and stability in elastic–plastic solids10.1016/0022-5096(58)90029-2 ↗
15. Bifurcation and uniqueness in non-linear mechanics of continua
16. Bifurcation phenomena in the plane tension test10.1016/0022-5096(75)90027-7 ↗
17. Finite strain analysis of elastic–plastic solids and structures
18. Shear band formation in plane strain10.1016/0020-7683(81)90053-6 ↗
19. Shear band development predicted by a non-normality theory of plasticity and comparison to crystal plasticity predictions10.1016/S0020-7683(01)00166-4 ↗
20. A theoretical approach of strain localization within thin planar bands in porous ductile materials10.1016/j.crme.2007.11.008 ↗
21. Necking of biaxially stretched elastic–plastic circular plates10.1016/0022-5096(77)90021-7 ↗
22. Collapse and coalescence of spherical voids subject to intense shearing: studied in full 3D10.1007/s10704-012-9757-4 ↗
23. Remeshing in analysis of large plastic deformations10.1016/S0045-7949(98)00005-4 ↗
24. Rice, J.R. (1976) The localization of plastic deformation. In: Proceedings of the International Congress on Theoretical and Applied Mechanics, North-Holland, Amsterdam, pp. 207–220.
25. Scheyvaerts · 2006
26. Effect of thickness inhomogeneities in internally pressurized elastic–plastic spherical shells10.1016/0022-5096(76)90027-2 ↗
27. Influence of voids on shear band instabilities under plane strain conditions10.1007/BF00036191 ↗
28. Influence of void nucleation on ductile shear fracture at a free surface10.1016/0022-5096(82)90025-4 ↗
29. Material failure by void growth to coalescence10.1016/S0065-2156(08)70195-9 ↗
30. Studies of void growth in a thin ductile layer between ceramics10.1007/s004660050238 ↗
31. On fatigue crack growth in ductile materials by cracktip blunting10.1016/j.jmps.2004.02.007 ↗
32. Shear deformation of voids with contact modeled by internal pressure10.1016/j.ijmecsci.2008.08.007 ↗
33. Behaviour of voids in a shear field10.1007/s10704-009-9364-1 ↗
34. Effect of stress-state and spacing on voids in a shear-field10.1016/j.ijsolstr.2012.06.008 ↗
35. Flow localization in the plane strain tensile test10.1016/0022-5096(81)90019-3 ↗
36. Conditions for shear localization in ductile fracture of void containing materials10.1007/BF00015989 ↗