journal article·2019-09Open access

Effective behaviour of porous ductile solids with a non-quadratic isotropic matrix yield surface

Lars Edvard Blystad Dæhli, Odd Sture Hopperstad, Ahmed Benallal

Abstract

In this study, we examine the macroscopic yielding of isotropic porous ductile solids having a matrix yield function dependent on the second and third deviatoric stress invariants. Numerical limit analyses using a three-dimensional finite element model of a hollow sphere with a Hershey-Hosford matrix yield function are conducted for different shapes of the matrix yield surface and porosity levels. These numerical results are then used to elucidate first-order effects of the third deviatoric stress invariant on the macroscopic yielding and further used as reference data to assess the performance of two porous plasticity models that incorporate effects of the third deviatoric stress invariant using the isotropic non-quadratic Hershey-Hosford yield function. The first model is derived from an upper-bound limit analysis of the hollow sphere representative volume element using the Gurson-Rice trial velocity field, but with a rather general isotropic matrix yield function. The second model is a simple, heuristic extension of the Gurson model incorporating the equivalent stress measure of the Hershey-Hosford yield function. From the numerical limit analyses, it is found that the contours of the macroscopic yield surface in the deviatoric plane transform from the hexagonal shape of the underlying matrix yield surface to a rounded triangular shape that converges to the circular shape of the Gurson model as the macroscopic stress triaxiality ratio increases. This shape transformation is dependent upon the porosity level. The upper-bound model was found to be in very good agreement with the numerical data for all stress states, shapes of the matrix yield surface, and porosity levels. The heuristic model provides good predictions for low and moderate levels of porosity pertinent to ductile fracture, but the predictions deteriorate when the stress triaxiality ratio and the porosity level increase. We also address the issue of how representative the spherical unit cell is for the description of real porous solids. To that end, we make comparisons between a space-filling representative volume element in the form of a cubic unit cell with a centric spherical void and the hollow sphere model. These results show that the hollow sphere model generally provides slightly higher values for the yield limits. The shape of the yield loci is similar for the two models in the case of non-quadratic matrix yield surfaces, while the cubic model gives a different shape of the yield loci for low and intermediate stress triaxiality ratios when the von Mises yield function is used for the matrix.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Importance of the coupling between the sign of the mean stress and the third invariant on the rate of void growth and collapse in porous solids with a von mises matrix10.1088/0965-0393/22/2/025005 ↗
2. Crystallographic texture, anisotropic yield surfaces and forming limits of sheet metals10.1016/0025-5416(87)90283-7 ↗
3. Constitutive equations for porous solids with matrix behaviour dependent on the second and third stress invariants10.1016/j.ijimpeng.2017.05.004 ↗
4. On some features of the effective behaviour of porous solids with J2- and J3- dependent yielding matrix behaviour10.1016/j.crme.2017.11.002 ↗
5. An assessment of the role of the third stress invariant in the Gurson approach for ductile fracture10.1016/j.euromechsol.2014.02.009 ↗
6. XLVI. A theory of the plastic distortion of a polycrystalline aggregate under combined stresses10.1080/14786445108561065 ↗
7. Void growth and collapse in viscous solids
8. Importance of the consideration of the specificities of local plastic deformation on the response of porous solids with tresca matrix10.1016/j.euromechsol.2014.04.004 ↗
9. New three-dimensional plastic potentials for porous solids with a von mises matrix10.1016/j.crme.2014.12.001 ↗
10. Cazacu · 2019 · 253
11. New analytical criterion for porous solids with Tresca matrix under axisymmetric loadings10.1016/j.ijsolstr.2013.11.010 ↗
12. On the combined effect of pressure and third invariant on yielding of porous solids with von mises matrix10.1115/1.4024074 ↗
13. A Lode-dependent Gurson model motivated by unit cell analyses10.1016/j.engfracmech.2017.12.023 ↗
14. Unit cell simulations and porous plasticity modelling for strongly anisotropic FCC metals10.1016/j.euromechsol.2017.05.004 ↗
15. Influence of yield surface curvature on the macroscopic yielding and ductile failure of isotropic porous plastic materials10.1016/j.jmps.2017.07.009 ↗
16. Prediction of necking and wrinkling in sheet-metal forming10.1016/0924-0136(94)01380-J ↗
17. Cell model for nonlinear fracture analysis – I. Micromechanics calibration10.1023/A:1007421420901 ↗
18. Computational homogenization of elasto-plastic porous metals10.1016/j.ijplas.2011.08.005 ↗
19. Continuum modeling of a porous solid with pressure-sensitive dilatant matrix10.1016/j.jmps.2008.01.006 ↗
20. Continuum theory of ductile rupture by void nucelation and growth: part I – Yield criteria and flow rules for porous ductile media10.1115/1.3443401 ↗
21. The plasticity of an isotropic aggregate of anisotropic face-centered cubic crystals10.1115/1.4010900 ↗
22. A generalized isotropic yield criterion10.1115/1.3422732 ↗
23. On the crystallographic basis of yield criteria10.1155/TSM.26-27.479 ↗
24. Plastic deformation of B.C.C. Polycrystals10.1016/0022-5096(64)90004-3 ↗
25. A multi-surface plasticity model for ductile fracture simulations10.1016/j.jmps.2017.03.005 ↗
26. Modeling of void growth in ductile solids: effects of stress triaxiality and initial porosity10.1016/S0013-7944(03)00114-0 ↗
27. Void growth and coalescence in porous plastic solids10.1016/0020-7683(88)90051-0 ↗
28. Gurson’s criterion and its derivation revisited10.1115/1.4026112 ↗
29. Isotropic polycrystal yield surfaces of B.C.C. and F.C.C. metals: crystallographic and continuum approaches10.1016/0956-7151(91)90011-O ↗
30. Void behaviors from low to high triaxialities: transition from void collapse to void coalescence10.1016/j.ijplas.2016.05.008 ↗
31. Upper-bound anisotropic yield locus calculations assuming ⟨111⟩-pencil glide10.1016/0020-7403(80)90011-9 ↗
32. A Gurson-type criterion for porous ductile solids containing arbitrary ellipsoidal voids - II: determination of yield criterion parameters10.1016/j.jmps.2012.01.010 ↗
33. Numerical studies of porous ductile materials containing arbitrary ellipsoidal voids - I: yield surfaces of representative cells10.1016/j.euromechsol.2013.06.004 ↗
34. Limit strains in the processes of stretch-forming sheet metal10.1016/0020-7403(67)90066-5 ↗
35. Collapse and coalescence of spherical voids subject to intense shearing: studied in full 3D10.1007/s10704-012-9757-4 ↗
36. Extended model for void growth and coalescence10.1016/S0022-5096(00)00019-3 ↗
37. Numerical limit analysis and plasticity criterion of a porous coulomb material with elliptic cylindrical voids10.1016/j.crme.2014.12.004 ↗
38. Limit analysis and numerical modeling of spherically porous solids with coulomb and Drucker-Prager matrices10.1016/j.cam.2009.08.079 ↗
39. New three-dimensional strain-rate potentials for isotropic porous metals: role of the plastic flow of the matrix10.1016/j.ijplas.2014.04.003 ↗
40. Role of the plastic flow of the matrix on yielding and void evolution of porous solids : comparison between the theoretical response of porous solids with tresca and von mises matrices10.1016/j.mechrescom.2013.11.008 ↗
41. The localization of plastic deformation
42. On the ductile enlargement of voids in triaxial stress fields10.1016/0022-5096(69)90033-7 ↗
43. On the overall yielding of an isotropic porous material with a matrix obeying a non-quadratic criterion10.1016/j.ijengsci.2016.04.005 ↗
44. Growth of spheroidal voids in elastic-plastic solids10.1111/j.1460-2695.1997.tb01525.x ↗
45. A criterion for the onset of void coalescence under combined tension and shear10.1016/j.jmps.2012.02.006 ↗
46. Hollow sphere models, conic programming and third stress invariant10.1016/j.euromechsol.2010.09.004 ↗
47. Limit analysis and Gurson’s model10.1016/j.euromechsol.2005.06.003 ↗
48. Influence of voids on shear band instabilities under plane strain conditions10.1007/BF00036191 ↗
49. A lower bound approach to the yield loci of porous materials10.1007/BF02487985 ↗