Scale bridging damage model for quasi-brittle metals informed with crack evolution statistics
Source abstract
Abstract
Abstract Computationally efficient methods for bridging length scales, from highly resolved micro/meso-scale models that can explicitly model crack growth, to macro-scale continuum models that are more suitable for modeling large parts, have been of interest to researchers for decades. In this work, an improved brittle damage model is presented for the simulation of dynamic fracture in continuum scale quasi-brittle metal components. Crack evolution statistics, including the number, length, and orientation of individual cracks, are extracted from high-fidelity, finite discrete element method (FDEM) simulations and used to generate effective material moduli that reflect the material’s damaged state over time. This strategy allows for the retention of small-scale physical behaviors such as crack growth and coalescence in continuum scale hydrodynamic simulations. However, the high-fidelity simulations required to generate the crack statistics are computationally expensive. Thus, steps were taken to produce a flexible constitutive model to reduce the number of costly high-fidelity simulations needed to produce accurate results. A new stress based degradation criterion is introduced for the degradation of individual material zones. This allows for the development of a heterogeneous damage distribution within the bulk material. Then a flow stress model is added to the hydrodynamic simulation to account for plasticity in quasi-brittle materials. As a result, the effective moduli model can be applied to a larger range of materials. The effective moduli constitutive model is used to simulate beryllium flyer plate experiments. The results from the continuum scale simulations using statistics from a single high-fidelity simulation are found to be in excellent agreement with numerical and experimental velocity interferometer data. The same set of crack statistics are used to extrapolate the results of a higher rate flyer plate case using the effective moduli model. The extension of this model to higher rate cases shows promise for further reducing the number of costly high-fidelity simulations needed to generate crack statistics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Numerical methods in engineering · Rock Mechanics and Modeling · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Effect of random defects on dynamic fracture in quasi-brittle materials10.1007/s10704-017-0243-x ↗
2. Spanning the continuum to quantum length scales in a dynamic simulation of brittle fracture10.1209/epl/i1998-00536-9 ↗
3. A constitutive model for the dynamics response of brittle materials10.1063/1.346090 ↗
4. Verification of 2-D detonation shock dynamics in conjunction with Los Alamos Lagrangian hydrocode
5. A review on phase-field models of brittle fracture and a new fast hybrid formulation10.1007/s00466-014-1109-y ↗
6. The effective compliance of spatially evolving planar wing-cracks10.1016/j.jmps.2017.11.016 ↗
7. Fracturing rate effect and creep in microplane model for dynamics10.1061/(ASCE)0733-9399(2000)126:9(962) ↗
8. Influence of strain rate and temperature on the mechanical behavior of beryllium10.1063/1.55657 ↗
9. Elastic moduli of a cracked soild10.1016/0020-7683(76)90044-5 ↗
10. Connectivity structures and differencing techniques for staggered-grid free-Lagrange hydrodynamics
11. Consistent finite-volume discretization of hydrodynamic conservation laws for unstructured grids
12. Multidimensional discretization of conservation laws for unstructured polyhedral grids
13. Compatible, energy conserving, bounds preserving remap of hydrodynamic fields for an extended ale scheme
14. Characterization of S200-F Beryllium using shock loading and quasi-static experiments
15. Verification and validation of the flag hydrocode for impact cratering simulations
16. Computational modelling of impact damage in brittle materials10.1016/0020-7683(95)00255-3 ↗
17. Dynamic fracture of ceramics in armor applications10.1111/j.1551-2916.2007.01515.x ↗
18. Strain-rate dependency of the dynamic tensile strength of rock10.1016/S1365-1609(03)00072-8 ↗
19. Implementation and validation of the BHR turbulence model in the FLAG hydrocode
20. Molecular dynamic simulations of crack propagation10.1016/0022-3697(87)90117-X ↗
21. 3-d finite-discrete element simulation of a triaxial direct-shear experiment
22. Simulation of fracture coalescence in granite via the combined finite discrete element method10.1007/s00603-019-01773-0 ↗
23. Ejecta source and transport modeling in the flag hydorcode10.1016/j.compfluid.2012.08.011 ↗
24. Modelling of failure mode transition in ballistic penetration with a continuum model describing microcracking and flow of pulverized media10.1002/nme.427 ↗
25. Fourier amplitude sensitivity test applied to dynamic combined finite-discrete element methods based simulations10.1002/nag.2852 ↗
26. The phenomena of rupture and flow in solids10.1098/rsta.1921.0006 ↗
27. The differential scheme and its application to cracked materials10.1016/0022-5096(88)90005-1 ↗
28. Overall moduli of solids with microcracks: load-induced anisotropy10.1016/0022-5096(83)90048-0 ↗
29. Multiscale modeling: a review
30. Reduced-order modeling through machine learning and graph-theoretic approaches for brittle fracture applications10.1016/j.commatsci.2018.10.036 ↗
31. Effective elastic moduli of two- dimensional brittle solids with interacting microcracks, part i: basic formulations10.1115/1.2901451 ↗
32. Effective elastic moduli of two- dimensional brittle solids with interacting microcracks, part ii: evolutionary damage models10.1115/1.2901452 ↗
33. A three dimensional statistical micromechanical theory for brittle solids with interacting microcracks10.1177/105678959200100106 ↗
34. An improved two-dimensional micromechanical theory for brittle solids with randomly located interacting microcracks10.1177/105678959500400103 ↗
35. Elastic solids with many cracks and related problems10.1016/S0065-2156(08)70176-5 ↗
36. LANL-CSM: consortium proposal for the advancement of HOSS
37. Introduction to beryllium: uses, regulatory history, and disease10.1080/10473220119088 ↗
38. Numerical simulation of ceramic composite armor subjected to ballistic impact10.1016/j.compositesb.2010.10.001 ↗
39. Effect of crack orientation statistics on effective stiffness of microcracked solid10.1016/j.ijsolstr.2008.11.023 ↗
40. Multiscale material modeling and its application to a dynamic crack propagation problem10.1016/j.tafmec.2009.01.003 ↗
41. A multiscale coupling method for the modeling of dynamics of solids with application to brittle cracks
42. Sesame: the Los Alamos National Laboratory equation of state database
43. Elastic moduli of a cracked body10.1007/BF00960099 ↗
44. Microphysical models for inelastic material response10.1016/0020-7225(84)90119-8 ↗
45. Dynamic fracture (spalling) of metals10.1016/0079-6425(83)90003-8 ↗
46. Predictive modeling of dynamic fracture growth in brittle materials with machine learning10.1016/j.commatsci.2018.01.056 ↗
47. Munjiza · 2004
48. Munjiza · 2012
49. A combined finite-discrete element method in transient dynamics of fracturing solids10.1108/02644409510799532 ↗
50. Munjiza · 2015
51. Calibrating the stress-time curve of a combined finite-discrete element method to a split Hopkinson pressure bar experiment10.1016/j.ijrmms.2018.03.016 ↗
52. Model of plastic deformation for extreme loading conditions10.1063/1.1524706 ↗
53. Fatigue crack growth characteristics of fe and ni under cyclic loading using a quasi-continuum method10.3762/bjnano.9.93 ↗
54. HOSS technology overview: oil and gas
55. Validation of a three-dimensional finite-discrete element method using experimental results of the split Hopkinson pressure bar test10.1016/j.ijrmms.2014.03.011 ↗
56. LANL-CSM: HOSS – MUNROU technology overview
57. Coarse-grained molecular dynamics and the atomic limit of finite elements10.1103/PhysRevB.58.R5893 ↗
58. On the tensile strength of granite at high strain rates considering the influence from preexisting cracks10.1155/2016/6279571 ↗
59. Combined continuum damage embedded discontinuity model for explicit dynamic fracture analyses of quasi brittle materials10.1002/nme.4814 ↗
60. The deformation mechanisms in process of crack propagation for alpha titanium with compounding microdefects10.1155/2016/2156936 ↗
61. A meshfree method based on the peridynamic model of solid mechanics10.1016/j.compstruc.2004.11.026 ↗
62. Simo · 2006
63. Equation of state and strength properties of selected materials
64. A constitutive model for metals applicable at high-strain rate10.1063/1.327799 ↗
65. Quasicontinuum analysis of defects in solids10.1080/01418619608243000 ↗
66. Spallation damage in copper with columnar grains
67. Statistically informed upscaling of damage evolution in brittle materials10.1016/j.tafmec.2019.04.012 ↗
68. Quasicontinuum simulation of brittle cracking in single crystal material10.1002/crat.201600247 ↗
69. Review on multi-scale simulation methods10.1088/1757-899X/394/3/032139 ↗
70. New crack tip elements for XFEM and applications to cohesive cracks10.1002/nme.849 ↗
71. The effect of microcracks on the elastic moduli of brittle materials10.1007/BF00721363 ↗
72. A mechanisms-based model for dynamic behavior and fracture of geomaterials10.1016/j.ijrmms.2014.09.015 ↗