Utilizing a novel lattice orientation based stress characterization method to study stress fields of shear bands
Source abstract
Abstract
Abstract A new framework for evaluating stress fields from distributions of crystallographic orientation is presented. The framework employs the kinematics of crystal plasticity and field dislocation mechanics to connect measured lattice orientation, crystallographic slip, and geometrically necessary dislocations to recover the elastic deformation field present, and subsequently determine the stress using a finite-element scheme. As a demonstration of the framework’s utility, stress fields generated by the formation of shear bands in a copper single crystal are studied, including how these bands’ stress fields drive secondary slip. The results indicate that small amounts of secondary slip shielded stresses produced by the shear bands and that the bands were oriented in a low-energy configuration, stabilizing their structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. A model of crystal plasticity based on the theory of continuously distributed dislocations10.1016/S0022-5096(00)00060-0 ↗
2. New perspectives in plasticity theory: dislocation nucleation, waves, and partial continuity of plastic strain rate10.1177/1081286507086903 ↗
3. Size effects and idealized dislocation microstructure at small scales: predictions of a phenomenological model of mesoscopic field dislocation mechanics: part i10.1016/j.jmps.2006.01.009 ↗
4. Chapter 16 Plastic Deformation and Work Hardening
5. Quantitative determination of secondary slip in copper single crystals deformed in tension10.1080/14786430310001612184 ↗
6. Constant intermittent flow of dislocations: central problems in plasticity10.1179/174328412X13409726212768 ↗
7. Slip and polygonization in aluminum
8. Study of residual stresses in ti-7al using theory and experiments10.1016/j.jmps.2017.08.008 ↗
9. A computational framework for evaluating residual stress distributions from diffraction-based lattice strain data10.1016/j.cma.2013.06.002 ↗
10. A new tribeam system for three-dimensional multimodal materials analysis10.1063/1.3680111 ↗
11. The Continuum Theory of Lattice Defects
12. Multiple slip in copper single crystals deformed in compression under uniaxial stress10.1016/j.scriptamat.2007.05.014 ↗
13. Scanning three-dimensional x-ray diffraction microscopy with a high-energy microbeam at spring-8
14. Inhomogenenities in the plastic deformation of metal crystals. ii. x-ray and optical micrography of aluminum
15. Hull · 2001
16. Polychromatic X-ray microdiffraction studies of mesoscale structure and dynamics10.1107/S0909049504026949 ↗
17. Ispánovity · 2017
18. Deformation bands in a [110] aluminium single crystal strained in tension10.1098/rspa.2002.0970 ↗
19. Formation and subdivision of deformation structures during plastic deformation10.1126/science.1124141 ↗
20. Evolution of dislocation density distributions in copper during tensile deformation10.1016/j.actamat.2013.08.027 ↗
21. Kelly · 2012
22. Overview no. 131regular deformation bands (dbs) and the leds hypothesis10.1016/S1359-6454(98)00413-3 ↗
23. Deformation bands, the leds theory, and their importance in texture development: part i. previous evidence and new observations10.1007/s11661-999-0258-7 ↗
24. Experimental lower bounds on geometrically necessary dislocation density10.1016/j.ijplas.2010.03.009 ↗
25. Submicrometre-resolution polychromatic three-dimensional X-ray microscopy10.1107/S0021889812043737 ↗
26. Three-dimensional plastic response in polycrystalline copper via near-field high-energy X-ray diffraction microscopy10.1107/S0021889812039519 ↗
27. High-energy diffraction microscopy at the advanced photon source10.1007/s11837-011-0116-0 ↗
28. Tensile twin nucleation events coupled to neighboring slip observed in three dimensions10.1016/j.actamat.2014.04.050 ↗
29. Geometrically necessary dislocation density distributions in ti6al4v deformed in tension10.1016/j.actamat.2011.07.016 ↗
30. Three-dimensional grain mapping by x-ray diffraction contrast tomography and the use of friedel pairs in diffraction data analysis10.1063/1.3100200 ↗
31. Mapping mesoscale heterogeneity in the plastic deformation of a copper single crystal10.1080/14786430802558577 ↗
32. A two-scale methodology for determining the residual stresses in polycrystalline solids using high energy x-ray diffraction data10.1016/j.jmps.2012.09.015 ↗
33. The mechanical properties of metals10.1088/0370-1301/64/9/301 ↗
34. Noyan · 2013
35. Pagan · 2016
36. Connecting heterogeneous single slip to diffraction peak evolution in high-energy monochromatic X-ray experiments10.1107/S1600576714005779 ↗
37. Determining heterogeneous slip activity on multiple slip systems from single crystal orientation pole figures10.1016/j.actamat.2016.06.020 ↗
38. Analyzing shear band formation with high resolution x-ray diffraction10.1016/j.actamat.2017.12.046 ↗
39. Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction10.1016/j.scriptamat.2008.01.050 ↗
40. Quantifying three-dimensional residual stress distributions using spatially-resolved diffraction measurements and finite element based data reduction10.1007/s11340-013-9771-0 ↗
41. Synchrotron x-ray microbeam diffraction measurements of full elastic long range internal strain and stress tensors in commercial-purity aluminum processed by multiple passes of equal-channel angular pressing10.1016/j.actamat.2016.04.035 ↗
42. Instantiation of crystal plasticity simulations for micromechanical modelling with direct input from microstructural data collected at light sources10.1016/j.scriptamat.2017.01.025 ↗
43. Finite element approximation of field dislocation mechanics10.1016/j.jmps.2004.05.007 ↗
44. Size effects and idealized dislocation microstructure at small scales: predictions of a phenomenological model of mesoscopic field dislocation mechanics: part II10.1016/j.jmps.2006.01.012 ↗
45. Resolving geometrically necessary dislocation density onto individual dislocation types using ebsd-based continuum dislocation microscopy10.1016/j.ijplas.2015.08.005 ↗
46. Forward modeling method for microstructure reconstruction using x-ray diffraction microscopy: single-crystal verification10.1063/1.2400017 ↗
47. Varadhan · 2007
48. Dislocation transport using an explicit galerkin/least-squares formulation10.1088/0965-0393/14/7/011 ↗