journal article·2017-10Open access

Volume growth during uniaxial tension of particle-filled elastomers at various temperatures – Experiments and modelling

Arne Ilseng, Bjørn H. Skallerud, Arild H. Clausen

Abstract

Abstract A common presumption for elastomeric material behaviour is incompressibility, however, the inclusion of filler particles might give rise to matrix-particle decohesion and subsequent volume growth. In this article, the volumetric deformation accompanying uniaxial tension of particle-filled elastomeric materials at low temperatures is studied. An experimental set-up enabling full-field deformation measurements is outlined and novel data are reported on the significant volume growth accompanying uniaxial tension of two HNBR and one FKM compounds at temperatures of − 18 , 0, and 23 °C. The volumetric deformation was found to increase with reduced temperature for all compounds. To explain the observed dilatation, in situ scanning electron microscopy was used to inspect matrix-particle debonding occurring at the surface of the materials. A new constitutive model, combining the Bergstrom–Boyce visco-hyperelastic formulation with a Gurson flow potential function is outlined to account for the observed debonding effects in a numerical framework. The proposed model is shown to provide a good correspondence to the experimental data, including the volumetric response, for the tested FKM compound at all temperature levels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Elasticity and Material Modeling · Composite Material Mechanics · Rheology and Fluid Dynamics Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials10.1016/0022-5096(93)90013-6 ↗
2. A visco-hyperelastic damage model for cyclic stress-softening, hysteresis and permanent set in rubber using the network alteration theory10.1016/j.ijplas.2013.08.001 ↗
3. Belytschko · 2014
4. Bergström · 2015
5. Constitutive modeling of the large strain time-dependent behavior of elastomers10.1016/S0022-5096(97)00075-6 ↗
6. A constitutive model for predicting the large deformation thermomechanical behavior of fluoropolymers10.1016/j.mechmat.2004.09.002 ↗
7. The compression of sixty-one solid substances to 25,000 kg/cm2 determined by a new rapid method
8. Experimental investigation and modelling of compressibility induced by damage in carbon black-reinforced natural rubber10.1016/j.crme.2014.02.005 ↗
9. Damage and fracture of polyvinylidene fluoride (PVDF) at 20 C: experiments and modelling10.1016/j.engfracmech.2005.06.007 ↗
10. Internal fracture in an elastomer containing a rigid inclusion10.1007/BF01086488 ↗
11. A Padé approximant to the inverse Langevin function10.1007/BF00366640 ↗
12. Volume changes in a filled elastomer studied via digital image correlation10.1016/j.polymertesting.2012.04.003 ↗
13. Thermo-viscoplasticity of carbon black-reinforced thermoplastic elastomers10.1016/j.ijsolstr.2009.01.015 ↗
14. Measuring discontinuous displacement fields in cracked specimens using digital image correlation with mesh adaptation and crack-path optimization10.1016/j.optlaseng.2012.09.010 ↗
15. Failure processes in elastomers at or near a rigid spherical inclusion10.1007/BF00550265 ↗
16. Continuum modeling of a porous solid with pressure-sensitive dilatant matrix10.1016/j.jmps.2008.01.006 ↗
17. Continuum theory of ductile rupture by void nucleation and growth: part I-yield criteria and flow rules for porous ductile media10.1115/1.3443401 ↗
18. Holzapfel · 2000
19. A new viscoelastic constitutive model for continuous media at finite thermomechanical changes10.1016/0020-7683(95)00263-4 ↗
20. Entropy elasticity of isotropic rubber-like solids at finite strains10.1016/0045-7825(96)01001-8 ↗
21. Initiation mechanisms of fatigue cracks in carbon black filled natural rubber10.1201/b18701-69 ↗
22. Volumetric compression of HNBR and FKM elastomers
23. Tension behaviour of HNBR and FKM elastomers for a wide range of temperatures10.1016/j.polymertesting.2015.11.017 ↗
24. An experimental and numerical study on the volume change of particle-filled elastomers in various loading modes10.1016/j.mechmat.2017.01.007 ↗
25. 10423:2009 Petroleum and Natural Gas Industries – Drilling and Production Equipment – Wellhead and Christmas Tree Equipment
26. 37:2011 Rubber, Vulcanized or Thermoplastic - Determination of Tensile Stress-Strain Properties
27. Experimental set-up for determination of the large-strain tensile behaviour of polymers at low temperatures10.1016/j.polymertesting.2016.06.011 ↗
28. SEM/EBSD based in situ studies of deformation induced phase transformations in supermartensitic stainless steels10.1179/174328407X245797 ↗
29. Experimental and numerical study on the temperature-dependent behavior of a fluoro-elastomer10.1007/s11043-014-9247-3 ↗
30. Mechanism of fatigue crack growth in carbon black filled natural rubber10.1021/ma0495386 ↗
31. Volume variation in stretched natural rubber: competition between cavitation and stress-Induced crystallization10.1021/ma801290w ↗
32. Cyclic volume changes in rubber10.1016/j.mechmat.2009.02.004 ↗
33. A constitutive model dealing with damage due to cavity growth and the Mullins effect in rubber-like materials under triaxial loading10.1016/j.jmps.2007.06.009 ↗
34. A constitutive model for cavitation and cavity growth in rubber-like materials under arbitrary tri-axial loading10.1016/j.ijsolstr.2007.02.016 ↗
35. A constitutive model for carbon black filled rubber: experimental investigations and mathematical representation10.1007/BF01181853 ↗
36. On the large deformation behaviour of reinforced rubber at different temperatures10.1016/S0022-5096(97)00028-8 ↗
37. Cavitation in elastomeric solids: II - onset-of-cavitation surfaces for Neo-Hookean materials10.1016/j.jmps.2011.04.016 ↗
38. Livermore Software Technology Corporation (LSTC) · 2015
39. Livermore Software Technology Corporation (LSTC) · 2016
40. Decomposition of deformation and representation of the free energy function for isotropic thermoelastic solids10.1016/0020-7683(75)90015-3 ↗
41. Modification of the gurson model for shear failure10.1016/j.euromechsol.2007.08.002 ↗
42. Large deformation isotropic elasticity: on the correlation of theory and experiment for compressible rubberlike solids10.1098/rspa.1972.0096 ↗
43. Extended model for void growth and coalescence10.1016/S0022-5096(00)00019-3 ↗
44. In situ X-ray synchrotron tomographic imaging during the compression of hyper-elastic polymeric materials10.1007/s10853-015-9355-8 ↗
45. Large elastic deformations of isotropic materials. IV. Further developments of the general theory10.1098/rsta.1948.0024 ↗
46. Un modèle viscoélastique non linéaire avec configuration intermédiaire
47. Associative coupled thermoplasticity at finite strains: formulation, numerical analysis and implementation10.1016/0045-7825(92)90170-O ↗
48. A 3D numerical study of ductile tearing and fatigue crack growth under nominal cyclic plasticity10.1016/S0020-7683(96)00137-0 ↗
49. Void growth in glassy polymers10.1016/S0022-5096(96)00093-2 ↗
50. Influence of voids on shear band instabilities under plane strain conditions10.1007/BF00036191 ↗
51. The modified gurson model accounting for the void size effect10.1016/j.ijplas.2004.01.004 ↗
52. Compressibility of natural rubber at pressures below 500 KG/CM210.5254/1.3540383 ↗
53. Some forms of the strain energy function for rubber10.5254/1.3538343 ↗
54. A complete gurson model approach for ductile fracture10.1016/S0013-7944(00)00055-2 ↗