Shock attenuation characteristics of methylcellulose hydrogels: Phenomenological modeling
Source abstract
Abstract
Abstract The shock attenuation characteristics of aqueous methylcellulose (MC) gels were characterized experimentally and modeled towards their application in bodily protection systems against traumatic injury. The attenuation of MC gel with 4 different thicknesses (4, 7, 10 and 20 mm) and 3 concentrations (5, 10 and 15%Wt) was measured, using an instrumented (Hopkinson) bar and piezoresistive sensors for direct force sensing on the gel. First, the impulse attenuation was systematically characterized for all combinations of thickness and composition, and the results were analyzed statistically. The impulse attenuation increases with both thickness and MC concentration. A non-linear function was then fitted to the experimental results. The fitted functions increase monotonically with both the thickness and the concentration of the gel layer. However, the slope of each function decreases gradually with the thickness of the layer, thereby indicating an effective thickness beyond which shock attenuation efficiency does not increase significantly. The frequency dependence of the attenuation was determined next and found to be relatively independent of both thickness and gel concentration up to 100 kHz. A phenomenological expression was developed and validated for the shock attenuation of MC gels as a function of their composition, thickness and spectral content of the shock.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Combustion and Detonation Processes · Structural Response to Dynamic Loads · Energetic Materials and Combustion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Experimental modeling of explosive blast-related traumatic brain Injuries10.1016/j.neuroimage.2010.05.030 ↗
2. Chen · 2011 · 1
3. A split Hopkinson Bar technique for low-impedance materials
4. Designing the energy absorption capacity of functionally Graded Foam materials10.1016/j.msea.2008.12.011 ↗
5. An investigation of the mechanical properties of materials at very high rates of loading10.1088/0370-1301/62/11/302 ↗
6. Compressive strain rate sensitivity of Ballistic Gelatin10.1016/j.jbiomech.2009.10.008 ↗
7. Edible coatings to improve food quality and safety
8. Impact-induced Gelation in Aqueous Methylcellulose solutions10.1039/C8CC06378H ↗
9. Design of armor for protection against blast and impact10.1016/j.jmps.2015.09.009 ↗
10. On the testing of the dynamic mechanical properties of soft Gelatins10.1007/s11340-014-9848-4 ↗
11. Linear and nonlinear shock attenuation of aqueous methylcellulose solutions
12. Mechanical reinforcement of methylcellulose hydrogels by rigid particle additives10.1016/j.mechmat.2019.02.013 ↗
13. Analysis of variance for random models
14. Inverse melting and inverse freezing: A spin model
15. Mitigation of shock loading on structures using Aqueous Methylcellulose solution
16. Fundamentals of signal processing for sound and vibration engineers