journal article·2026-08

Microporosity as key driver of the in-situ properties of an LPBF-AlSi10Mg mesoporous metamaterial

A. Rocco, B. Smaniotto, M.G. Tarantino, F. Hild

Publisher page

Abstract

Metallic metamaterials are a novel class of metallic materials, which combine precisely-engineered mesoporous architectures with attractive properties of metals. When produced through additive manufacturing, they inherently contain defects whose influence on their tensile response is the main focus of this study. The effect of internal porosity on the elastoplastic matrix of AlSi10Mg mesoporous material response was probed in-situ, through a tensile test coupled with X-ray tomography and Digital Volume Correlation (DVC). By applying Integrated-DVC (I-DVC) with damaged meshes, the role of density defects (such as small pores and cracks within the matrix) on the strain hardening matrix parameters was quantified, and the identified properties were compared to bulk AlSi10Mg data reported in the literature. It is shown that density defects drove the in-situ matrix properties, highlighting the need to account for them when modeling the elastoplastic response of additivelymanufactured metamaterials. Simulations based on a defect-free matrix assumption yielded predictions that departed from the experiment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Nanoporous metals and alloys · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (94)

Show source-provided references
1. The microstructure and mechanical properties of selectively laser melted alsi10mg: the effect of a conventional t6-like heat treatment10.1016/j.msea.2016.04.092 ↗
2. The microstructure and mechanical properties of selectively laser melted AlSi10Mg: the effect of a conventional T6-like heat treatment10.1016/j.msea.2016.04.092 ↗
3. Post heat treatment of additive manufactured AlSi10Mg: on silicon morphology, texture and small-scale properties10.1016/j.msea.2020.139296 ↗
4. Effect of pore size on the tensile behavior of open-cell ti foams: experimental results10.1016/j.matlet.2010.01.064 ↗
5. Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches10.1016/j.actamat.2018.08.030 ↗
6. Micro-tensile behavior of struts extracted from an aluminum foam10.1016/j.matchar.2020.110456 ↗
7. Experimental and FEM investigation of BCC lattice structure under compression test by using continuum damage mechanics with micro-defect closure effect10.1016/j.matdes.2023.112125 ↗
8. Assessing the compressive and tensile properties of TPMS-Gyroid and stochastic Ti64 lattice structures: a study on laser powder bed fusion manufacturing for biomedical implants
9. Poynting effects in pantographic metamaterial captured via multiscale DVC10.1177/0309324720976625 ↗
10. Overview of identification methods of mechanical parameters based on full-field measurements10.1007/s11340-008-9148-y ↗
11. On the fatigue strength enhancement of additive manufactured AlSi10Mg parts by mechanical and thermal post-processing10.1016/j.matdes.2018.02.055 ↗
12. Fatigue strength assessment of “as built” AlSi10Mg manufactured by SLM with different build orientations10.1016/j.ijfatigue.2020.105737 ↗
13. Digital volume correlation: review of progress and challenges10.1007/s11340-018-0390-7 ↗
14. On the calibration of elastoplastic parameters at the microscale via X-ray microtomography and digital volume correlation for the simulation of ductile damage10.1016/j.euromechsol.2018.04.010 ↗
15. Damage evolution and failure mechanisms in additively manufactured stainless steel10.1016/j.msea.2015.10.073 ↗
16. Additive manufacturing assisted investment casting: a low-cost method to fabricate periodic metallic cellular lattices
17. Element-removal global digital image correlation for accurate discontinuous deformation field measurement in fracture mechanics10.1016/j.engfracmech.2023.109493 ↗
18. Effect of heat treatment on the anisotropy in mechanical properties of selective laser melted AlSi10Mg10.1016/j.msea.2022.144130 ↗
19. The out-of-plane compressive behavior of metallic honeycombs10.1016/j.msea.2004.03.051 ↗
20. Cramér, H., 1946. In: Mathematical Methods of Statistics. Princeton Univ. Press, Princeton, NJ (USA).10.1515/9781400883868 ↗
21. On the effect of geometrical imperfections and defects on the fatigue strength of cellular lattice structures additively manufactured via selective laser melting10.1016/j.ijfatigue.2019.03.019 ↗
22. State of the art in directed energy deposition: from additive manufacturing to materials design10.3390/coatings9070418 ↗
23. AI-enabled materials design of non-periodic 3D architectures with predictable direction-dependent elastic properties10.1002/adma.202308149 ↗
24. Effective properties of the octet-truss lattice material10.1016/S0022-5096(01)00010-2 ↗
25. Orientation dependency for microstructure, geometric accuracy and mechanical properties of selective laser melting AlSi10Mg lattices10.1016/j.jallcom.2019.03.344 ↗
26. Properties and applications of additively manufactured metallic cellular materials: a review10.1016/j.pmatsci.2021.100918 ↗
27. The effects of microporosity in struts of gyroid lattice structures produced by laser powder bed fusion10.1016/j.matdes.2020.108899 ↗
28. Effects of defects on mechanical properties in metal additive manufacturing: a review focusing on X-ray tomography insights10.1016/j.matdes.2019.108385 ↗
29. Review of defects in lattice structures manufactured by powder bed fusion10.1007/s00170-019-04753-4 ↗
30. Practical cone-beam algorithm10.1364/JOSAA.1.000612 ↗
31. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
32. Investment casting of periodic aluminum cellular structures using slurry-cast table salt moulds10.1016/j.matdes.2022.110488 ↗
33. Experimental and numerical investigation of ductile fracture using GTN damage model on in-situ tensile tests10.1016/j.ijmecsci.2019.105170 ↗
34. The effects of defects and damage in the mechanical behavior of Ti6Al4V lattices10.3389/fmats.2019.00117 ↗
35. Porous metals
36. Process defects and in situ monitoring methods in metal powder bed fusion: a review10.1088/1361-6501/aa5c4f ↗
37. Investigation of mechanical properties of laser powder bed fused alsi10mg lattice structures using GTN damage model10.1016/j.jmrt.2024.01.187 ↗
38. Development of a mechanism-based fatigue damage model incorporating surface roughness defects for life prediction of AM 316L lattice structures10.1016/j.ijfatigue.2025.109366 ↗
39. The L-curve and its use in the numerical treatment of inverse problems
40. The effect of defects on the mechanical response of Ti-6Al-4V cubic lattice structures fabricated by electron beam melting10.1016/j.actamat.2016.02.029 ↗
41. Toward 4D mechanical correlation10.1186/s40323-016-0070-z ↗
42. Damage measurements via DIC10.1007/s10704-015-0004-7 ↗
43. Mechanically-grown morphogenesis of Voronoi-type materials: computer design, 3D-printing and experiments10.1016/j.mechmat.2022.104432 ↗
44. Understanding the laser powder bed fusion of AlSi10Mg alloy10.1007/s13632-020-00659-w ↗
45. Identification from measurements of mechanical fields by finite element model updating strategies
46. On elastic anisotropy of 3D printed acrylonitrile butadiene styrene structures10.1016/j.polymer.2022.125032 ↗
47. Investigation of the effect of artificial internal defects on the tensile behavior of laser powder bed fusion 17–4 stainless steel samples: simultaneous tensile testing and X-Ray computed tomography10.1007/s11340-020-00604-6 ↗
48. Light-based printing of leachable salt molds for facile shaping of complex structures
49. Quantifying damage in an AlSi10Mg porous metamaterial through projection-enhanced DVC10.1088/1361-6501/ade131 ↗
50. Linking microstructure and processing defects to mechanical properties of selectively laser melted alsi10mg alloy10.1016/j.tafmec.2018.09.011 ↗
51. Digital volume correlation: what are the limits to the spatial resolution?10.1051/meca/2012025 ↗
52. Porous metals and metallic foams: current status and recent developments10.1002/adem.200800241 ↗
53. Microstructure and micromechanical properties of microcellular AlSi10Mg produced via LPBF10.1016/j.matchar.2026.116426 ↗
54. Architected metallic cellular materials with random pore features: computer design, LPBF fabrication and mechanical properties10.1016/j.prostr.2024.01.040 ↗
55. Metal additive manufacturing: a review of mechanical properties10.1146/annurev-matsci-070115-032024 ↗
56. Metal binder jetting additive manufacturing: a literature review10.1115/1.4047430 ↗
57. Effect of geometric defects on the mechanical properties of additive manufactured Ti6Al4V lattice structures10.1016/j.tws.2024.112497 ↗
58. Elastic and failure response of imperfect three-dimensional metallic lattices: the role of geometric defects induced by selective laser melting10.1016/j.jmps.2017.07.003 ↗
59. Damage quantification in an AlSi10Mg cellular metamaterial using 4D measurements10.1088/1361-6501/adf5db ↗
60. Estimation of elastoplastic parameters via weighted FEMU and integrated-DIC10.1007/s11340-014-9888-9 ↗
61. Mechanical response of hollow metallic nanolattices: combining structural and material size effects10.1115/1.4030361 ↗
62. Modelling of plastic flow localisation and damage development in friction stir welded 6005a aluminium alloy using physics based strain hardening law10.1016/j.ijsolstr.2010.03.019 ↗
63. Impact of contour scanning and helium-rich process gas on performances of alloy 718 lattices produced by laser powder bed fusion10.1016/j.matdes.2022.110501 ↗
64. Failure of metals I: brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
65. In-situ synchrotron X-ray tomography investigation of micro lattice manufactured with the projection micro-stereolithography (PSL) 3D printing technique: defects characterization and in-situ shear test10.1016/j.compstruct.2020.112710 ↗
66. Information and the accuracy attainable in the estimation of statistical parameters
67. Heat treatment effect on the mechanical properties and fracture mechanism in AlSi10Mg fabricated by additive manufacturing selective laser melting process10.1016/j.msea.2018.05.074 ↗
68. Plasticity and fracture of cast and SLM AlSi10Mg: high-throughput testing and modeling
69. Architecture-driven digital image correlation technique (ADDICT) for the measurement of sub-cellular kinematic fields in speckle-free cellular materials
70. Comprehensive full-field measurements via digital image correlation
71. Tensile deformation and failure of AlSi10Mg random cellular metamaterials10.1016/j.ijmecsci.2024.109612 ↗
72. Architected cellular materials10.1146/annurev-matsci-070115-031624 ↗
73. Ultralight metallic microlattices10.1126/science.1211649 ↗
74. On the benefits of correcting brightness and contrast in global digital image correlation: monitoring cracks during curing and drying of a refractory castable10.1016/j.optlaseng.2020.106316 ↗
75. On the thermal conductivity of AlSi10Mg and lattice structures made by laser powder bed fusion
76. Review of the formation and impact of flaws in powder bed fusion additive manufacturing
77. Mechanical equivalent diameter of single struts for the stiffness prediction of lattice structures produced by electron beam melting
78. Powder bed fusion processes: an overview10.1016/B978-0-08-100433-3.00002-6 ↗
79. Random 3D-printed isotropic composites with high volume fraction of pore-like polydisperse inclusions and near-optimal elastic stiffness10.1016/j.actamat.2019.06.020 ↗
80. Mechanics-aided digital image correlation10.1177/0309324713482457 ↗
81. Digital volume correlation analyses to study deformation and damage mechanisms of teak in torsion10.5802/crmeca.107 ↗
82. On the evaluation of in-situ mechanical properties of an additively manufactured BCC lattice10.1016/j.mechmat.2026.105602 ↗
83. Mesoscale DVC analyses and parameter calibration for pantographic block in 3-point flexure10.1016/j.euromechsol.2023.105063 ↗
84. The relationship between stress and strain for homogeneous deformation
85. Additive manufacturing of 3D nano-architected metals10.1038/s41467-018-03071-9 ↗
86. Multifunctional periodic cellular metals10.1098/rsta.2005.1697 ↗
87. Recent advances in novel metallic honeycomb structure10.1016/j.compositesb.2019.02.011 ↗
88. Visualization by x-ray tomography of void growth and coalescence leading to fracture in model materials10.1016/j.actamat.2008.02.027 ↗
89. X-ray computed tomography10.1038/s43586-021-00015-4 ↗
90. The effect of defect population on the anisotropic fatigue resistance of AlSi10Mg alloy fabricated by laser powder bed fusion10.1016/j.ijfatigue.2021.106317 ↗
91. Numerically-aided 3D printed random isotropic porous materials approaching the Hashin-Shtrikman bounds10.1016/j.compositesb.2018.08.032 ↗
92. Mechanical characterization of lattice structures fabricated by selective laser melting via an image-based finite cell method with a damage model10.1016/j.matdes.2024.113168 ↗
93. Topological design, permeability and mechanical behavior of additively manufactured functionally graded porous metallic biomaterials10.1016/j.actbio.2018.12.013 ↗
94. Ultralight, ultrastiff mechanical metamaterials10.1126/science.1252291 ↗