Steady-state crack growth in single crystals under Mode I loading
Source abstract
Abstract
Abstract The active plastic zone that surrounds the tip of a sharp crack growing under plane strain Mode I loading conditions at a constant velocity in a single crystal is studied. Both the characteristics of the plastic zone and its effect on the macroscopic toughness is investigated in terms of crack tip shielding due to plasticity (quantified by employing the Suo, Shih, and Varias set-up). Three single crystals (FCC, BCC, HCP) are modelled in a steady-state elastic visco-plastic framework, with emphasis on the influence of rate-sensitivity and crystal structures. Distinct velocity discontinuities at the crack tip predicted by Rice [Rice J.R., 1987. Tensile crack tip fields in elastic-ideally plastic crystals. Mech. Mater. 6, pp. 317–335] for quasi-static crack growth are confirmed through the numerical simulations and highly refined details are revealed. Through a detailed study, it is demonstrated that the largest shielding effect develops in HCP crystals, while the lowest shielding exists for FCC crystals. Rate-sensitivity is found to affect the plastic zone size, but the characteristics overall remain similar for each individual crystal structure. An increasing rate-sensitivity at low crack velocities monotonically increases the crack tip shielding, whereas the opposite behaviour is observed at high velocities. This observation leads to the existence of a characteristic velocity at which the crack tip shielding becomes independent of the rate-sensitivity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High-Velocity Impact and Material Behavior · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Anderson · 2005
2. A self-consistent model for cleavage in the presence of plastic flow10.1016/S1359-6454(96)00047-X ↗
3. Geometrically necessary dislocation density measurements associated with different angles of indentations10.1016/j.ijplas.2013.08.008 ↗
4. Quasi-static steady crack growth in small-scale yielding
5. Steady-state crack growth in elastic power-law creeping materials
6. Bounds and self-consistent estimates for creep of polycrystalline materials10.1098/rspa.1976.0027 ↗
7. Steady-state numerical modeling of size effects in micron scale wire drawing10.1016/j.jmapro.2016.12.005 ↗
8. Cylindrical void in a rigid-ideally plastic single crystal. Part I: Anisotropic slip line theory solution for face-centered cubic crystals10.1016/j.ijplas.2004.07.007 ↗
9. A strain-gradient model of cleavage fracture in plastically deforming materials10.1016/S1359-6454(96)00043-2 ↗
10. Nielsen · 2012
11. Rate sensitivity of mixed mode interface toughness of dissimilar metallic materials: studied at steady state10.1016/j.ijsolstr.2011.11.001 ↗
12. Strain gradient effects on steady-state crack growth in rate-dependent materials10.1016/j.engfracmech.2012.06.022 ↗
13. Analysis of steady-state ductile crack growth along a laser weld10.1023/A:1010951331590 ↗
14. Computational strain gradient crystal plasticity10.1016/j.jmps.2013.08.014 ↗
15. An analysis of cracks in ductile single crystals-II. Mode I loading10.1016/S0022-5096(05)80015-8 ↗
16. Tensile crack tip fields in elastic-ideally plastic crystals10.1016/0167-6636(87)90030-5 ↗
17. Crack tip fields in ductile crystals10.1007/BF01185954 ↗
18. Dislocations, cracks and brittleness in single crystals10.1088/0031-8949/1993/T49B/006 ↗
19. Energy release rate along a three-dimensional crack front in a thermally stressed body10.1007/BF00034019 ↗
20. A theory for cleavage cracking in the presence of plastic flow10.1016/0956-7151(93)90263-R ↗
21. Dislocation dynamic modelling of the brittle-ductile transition in tungsten10.1080/14786430902992619 ↗
22. Cleavage crack growth resistance due to plastic flow around a near-tip dislocation-free region10.1016/S0022-5096(96)00115-9 ↗
23. Models of interface separation accompanied by plastic dissipation at multiple scales10.1023/A:1018627712739 ↗