Computational multiscale modelling of material interfaces in electrical conductors
Source abstract
Abstract
Material interfaces occur at various length scales and may exhibit significantly different properties than the surrounding bulk. Motivated by their importance for electrical engineering applications such as wire bonds and electrically conductive adhesives, the focus of the present work is on material interfaces in electrical conductors. In order to approximate the physical interphase (of finite thickness) as a (zero-thickness) cohesive zone-type interface in macroscale simulations, scale-bridging relations are established that relate the apparent electro-mechanical interface properties to the underlying microstructure. A finite element-based implementation is discussed with particular focus lying on the efficient calculation of the flux-type macroscale quantities and the associated generalised algorithmic consistent tangent stiffness tensors. Analytical solutions are derived for validation purposes and representative boundary value problems are studied.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Composite Material Mechanics · Numerical methods in engineering · Advanced Mathematical Modeling in Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. A phenomenological cohesive model of ferroelectric fatigue10.1016/j.actamat.2005.10.035 ↗
2. A fully coupled chemo-mechanical cohesive zone model for oxygen embrittlement of nickel-based superalloys10.1016/j.jmps.2022.104880 ↗
3. The formation of equilibrium cracks during brittle fracture. General ideas and hypotheses. Axially-symmetric cracks10.1016/0021-8928(59)90157-1 ↗
4. Computational homogenisation for thermoviscoplasticity: Application to thermally sprayed coatings10.1007/s00466-017-1436-x ↗
5. Computational homogenisation of thermo-viscoplastic composites: Large strain formulation and weak micro-periodicity10.1016/j.cma.2018.12.032 ↗
6. Continuum damage mechanics: Present state and future trends10.1016/0029-5493(87)90225-1 ↗
7. Conducting polymer-based electrically conductive adhesive materials: Design, fabrication, properties, and applications10.1007/s10854-020-03712-0 ↗
8. Yielding of steel sheets containing slits10.1016/0022-5096(60)90013-2 ↗
9. The determination of the elastic field of an ellipsoidal inclusion, and related problems
10. A thermo-mechanical cohesive zone model accounting for mechanically energetic Kapitza interfaces10.1016/j.ijsolstr.2016.04.035 ↗
11. A thermo-mechanical cohesive zone formulation for ductile fracture10.1016/j.jmps.2008.06.002 ↗
12. FE2 multiscale approach for modelling the elastoviscoplastic behaviour of long fibre SiC/Ti composite materials10.1016/S0045-7825(99)00224-8 ↗
13. Homogenization methods and multiscale modeling: Nonlinear problems
14. A review of FE-FFT-based two-scale methods for computational modeling of microstructure evolution and macroscopic material behavior10.1007/s11831-022-09735-6 ↗
15. Multiscale modeling of the elastic behavior of architectured and nanostructured Cu-Nb composite wires10.1016/j.ijsolstr.2017.05.022 ↗
16. A continuum theory of elastic material surfaces10.1007/BF00261375 ↗
17. A computational multiscale approach towards the modelling of microstructures with material interfaces in electrical conductors
18. A thermo-electro-mechanically coupled cohesive zone formulation for predicting interfacial damage10.1016/j.euromechsol.2023.104935 ↗
19. Consistent elastoplastic cohesive zone model at finite deformations – Variational formulation10.1016/j.ijsolstr.2016.10.027 ↗
20. Continuum micro-mechanics of elastoplastic polycrystals10.1016/0022-5096(65)90023-2 ↗
21. Computational multiscale modelling of heterogeneous material layers10.1016/j.engfracmech.2008.10.018 ↗
22. Computational homogenization of material layers with micromorphic mesostructure10.1080/14786430802502567 ↗
23. Numerical homogenization of mesoscopic loss in poroelastic media10.1016/j.euromechsol.2014.08.011 ↗
24. Variational formulation of generalized interfaces for finite deformation elasticity10.1177/1081286517719938 ↗
25. Computational homogenization in magneto-mechanics10.1016/j.ijsolstr.2013.08.024 ↗
26. Micro-to-macro transition accounting for general imperfect interfaces10.1016/j.cma.2016.12.025 ↗
27. Electrical and mechanical behaviour of metal thin films with deformation-induced cracks predicted by computational homogenisation10.1007/s10704-021-00582-3 ↗
28. Probing porosity in metals by electrical conductivity: Nanoscale experiments and multiscale simulations10.1016/j.euromechsol.2022.104777 ↗
29. An electro-mechanically coupled computational multiscale formulation for electrical conductors10.1007/s00419-020-01837-6 ↗
30. A finite deformation electro-mechanically coupled computational multiscale formulation for electrical conductors10.1007/s00707-021-03005-5 ↗
31. Fundamentals of electro-mechanically coupled cohesive zone formulations for electrical conductors10.1007/s00466-021-02019-z ↗
32. Two-scale computational homogenization of electro-elasticity at finite strains10.1016/j.cma.2014.04.020 ↗
33. Computational homogenization of piezoelectric materials using FE2 to determine configurational forces
34. An approach to micro-macro modeling of heterogeneous materials10.1007/s004660000212 ↗
35. A cohesive zone model for the electromechanical damage of piezoelectric/ferroelectric materials10.1088/0964-1726/23/5/055024 ↗
36. Lemaitre · 1996
37. A review of predictive nonlinear theories for multiscale modeling of heterogeneous materials10.1016/j.jcp.2016.10.070 ↗
38. Multiscale cohesive failure modeling of heterogeneous adhesives10.1016/j.jmps.2007.08.005 ↗
39. Micro-to-macro transitions for heterogeneous material layers accounting for in-plane stretch10.1016/j.jmps.2012.01.003 ↗
40. Computational homogenization analysis in finite plasticity. Simulation of texture development in polycrystalline materials10.1016/S0045-7825(98)00218-7 ↗
41. A thermodynamically and variationally consistent class of damage-type cohesive models10.1016/j.jmps.2011.04.012 ↗
42. A continuum mechanics approach to the analysis of damage and fracture10.1007/978-94-007-2666-6_11 ↗
43. A thermodynamical theory of elastic material interfaces10.1093/qjmam/29.3.245 ↗
44. Thermodynamically based fictitious crack/interface model for general normal and shear loading10.1016/j.ijsolstr.2013.06.019 ↗
45. Fundamental physical principles and cohesive zone models at finite displacements – limitations and possibilities10.1016/j.ijsolstr.2014.10.020 ↗
46. Framework for non-coherent interface models at finite displacement jumps and finite strains10.1016/j.jmps.2016.02.034 ↗
47. FE2 computational homogenization for the thermo-mechanical analysis of heterogeneous solids10.1016/j.cma.2008.09.008 ↗
48. A thermo-mechanical cohesive zone model10.1007/s00466-010-0507-z ↗
49. One-step preparation of silver hexagonal microsheets as electrically conductive adhesive fillers for printed electronics10.1021/acsami.5b03571 ↗
50. Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle10.1002/zamm.19290090104 ↗
51. Theoretical formulation and computational aspects of a two-scale homogenization scheme combining the TPM and FE2 method for poro-elastic fluid-saturated porous media10.1016/j.ijsolstr.2021.111412 ↗
52. Zur Ableitung einer Fliessbedingung
53. A review of nonlinear FFT-based computational homogenization methods10.1007/s00707-021-02962-1 ↗
54. Derivation of the localization and homogenization conditions for electro-mechanically coupled problems10.1016/j.commatsci.2009.03.035 ↗
55. A multiscale finite element method for modeling fully coupled thermomechanical problems in solids10.1002/nme.4320 ↗
56. Homogenization in micro-magneto-mechanics10.1007/s00466-016-1286-y ↗
57. Effects of coupling agents on the properties of epoxy-based electrically conductive adhesives10.1016/j.ijadhadh.2005.06.005 ↗
58. Plastic strain in metals
59. Homogenization in finite thermoelasticity10.1016/j.jmps.2010.10.004 ↗
60. Computational modelling of thermal impact welded PEEK/steel single lap tensile specimens10.1016/j.commatsci.2007.04.015 ↗
61. On the simulation of cohesive fatigue effects in grain boundaries of a piezoelectric mesostructure10.1016/j.ijsolstr.2008.04.017 ↗
62. On the development of a 3D cohesive zone element in the presence of large deformations10.1007/s00466-007-0184-8 ↗
63. A partition of unity-based multiscale approach for modelling fracture in piezoelectric ceramics10.1002/nme.2792 ↗
64. Voigt · 1887
65. On the lack of rotational equilibrium in cohesive zone elements10.1016/j.cma.2012.10.004 ↗
66. Imposing linear constraints in finite-element analysis10.1002/cnm.1630060607 ↗
67. A generalized cohesive zone model and a grain boundary yield criterion for gradient plasticity derived from surface- and interface-related arguments10.1016/j.ijplas.2017.02.006 ↗
68. Continuum micromechanics: Survey10.1061/(ASCE)0733-9399(2002)128:8(808) ↗