Multi-scale modeling of hydrogel-based concrete formed under the ambient environment and the extremely harsh environment of Mars
Source abstract
Abstract
Hydrogel-based concretes (HBCs) are an emerging class of load-bearing composite materials consisting of inert particles joined together by micro-hydrogel joints. As HBCs can harden via sol-gel process and H2O phase changes under a freezing temperature and vacuum, they are suitable for future exterritorial constructions. Previous studies have demonstrated that the internal microstructure of the hydrogel joints in HBC varies significantly with curing temperature and air pressure, leading to variations in their mechanical properties. In this study, we present a new multi-scale model that quantitatively predicts the mechanical properties of HBC formed under different curing environments including Martian atmosphere. On the micro-scale, four representative joint microstructures are studied, including tubular, foamy, honeycomb, and tube-cased-foam joints. We experimentally studied and analytically derived the constitutive relationship between the joint force and displacement. Particularly, we determined the process of hydrogel skin peeling from the particle's surface of tubular joints based on force and energy equilibrium. On the macro-scale, we simplified the constitutive joint relationships in a linear parallel bond model (LPM) and employed them to quantify interparticle relationships in a discrete element method (DEM)-based HBC model. The Weibull distribution is used to consider the variation of tensile and shear strengths of the hydrogel joints in the DEM. The modeling results are not only validated with the experimentally acquired compressive stress-strain curves of HBC, but also accurately predict the combined influence of mix design and curing conditions on the mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Surface Modification and Superhydrophobicity · Calcium Carbonate Crystallization and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. The Halpin-Tsai equations: a review10.1002/pen.760160512 ↗
2. Adhesion of elastic thin films: double peeling of tapes versus axisymmetric peeling of membranes10.1007/s11249-013-0227-6 ↗
3. Porous particle-polymer composites
4. Toward biomimetic and living earth materials10.1016/j.matt.2023.11.003 ↗
5. Peeling of a tape with large deformations and frictional sliding10.1016/j.jmps.2012.09.014 ↗
6. A new approach to the application of Mori-Tanaka's theory in composite materials10.1016/0167-6636(87)90005-6 ↗
7. Effect of inclusion size on mechanical properties of polymeric composites with micro and nano particles10.1016/j.compscitech.2005.12.028 ↗
8. Discrete-element modeling of cemented granular material using mixed-mode cohesive zone model10.1061/(ASCE)MT.1943-5533.0003069 ↗
9. Measurement of ice-binding protein activity in highly alkaline environments
10. Effective properties of cemented granular materials10.1016/0167-6636(94)90044-2 ↗
11. The determination of the elastic field of an ellipsoidal inclusion, and related problems
12. A model for the prediction of debond onset in spherical-particle-reinforced composites under tension. Application of a coupled stress and energy criterion10.1016/j.compscitech.2014.10.010 ↗
13. Cellular solids10.1557/mrs2003.79 ↗
14. Optimization of the properties in Al/SiC composites by tailoring microstructure through gelatin freeze casting10.1016/j.msea.2019.01.093 ↗
15. Modeling interfacial instability patterns during debonding a rigid spherical indenter from thin elastic films10.1016/j.jmps.2022.105089 ↗
16. Biomineralization and successive regeneration of engineered living building materials10.1016/j.matt.2019.11.016 ↗
17. Comparison between controlled laboratory experiments and discrete particle simulations of the mechanical behaviour of rock10.1016/j.ijrmms.2005.05.006 ↗
18. Hoogenboom · 2005
19. Weak hydrogen bonding enables hard, strong, tough, and elastic hydrogels10.1002/adma.201503724 ↗
20. Peeling behavior of a film on inner surface of a tube10.1016/j.eml.2022.101930 ↗
21. Microparameters calibration for discrete element method based on gaussian processes response surface methodology10.3390/pr11102944 ↗
22. Review of space resources processing for Mars missions: martian simulants, regolith bonding concepts and additive manufacturing10.1016/j.oceram.2021.100216 ↗
23. Thin-film peeling-the elastic term10.1088/0022-3727/8/13/005 ↗
24. Application of supervised machine learning as a method for identifying DEM contact law parameters10.3934/mbe.2021370 ↗
25. On the effect of particle size on fracture toughness of polymer composites10.1016/j.compscitech.2008.09.011 ↗
26. Weibull grain-based model (W-GBM) for simulating heterogeneous mechanical characteristics of salt rock10.1016/j.enganabound.2019.09.001 ↗
27. Effects of the pore shape polydispersity on the percolation threshold and diffusivity of porous composites: theoretical and numerical studies10.1016/j.powtec.2021.03.055 ↗
28. The effect of water content on the elastic modulus and fracture energy of hydrogel10.1016/j.eml.2019.100617 ↗
29. A theoretical-numerical model for the peeling of elastic membranes10.1016/j.jmps.2019.103733 ↗
30. Numerical studies on the inter-particle breakage of a confined particle assembly in rock crushing10.1016/j.mechmat.2004.10.002 ↗
31. An interfacial debonding model for particle-reinforced composites10.1177/1056789504041057 ↗
32. Numerical simulation of failure behavior of brittle heterogeneous rock under uniaxial compression Test10.3390/ma15197035 ↗
33. Effect of the freezing temperature and near-vacuum air pressure of Mars on the mechanical properties and microstructure of hydrogel-based concrete (HBC)10.1016/j.eml.2022.101864 ↗
34. Out-of-plane shear property analysis of Nomex honeycomb sandwich structure10.1177/0731684420943285 ↗
35. Isotropized Voigt-Reuss model for prediction of elastic properties of particulate composites10.1080/15376494.2021.1913772 ↗
36. Particle size effect on EPS lightweight concrete compressive strength: experimental investigation and modelling10.1016/j.mechmat.2006.05.008 ↗
37. Extraterrestrial construction materials10.1016/j.pmatsci.2019.100577 ↗
38. Modelling of concrete behaviour in uniaxial compression and tension with DEM10.1007/s10035-015-0546-4 ↗
39. Decohesion of a rigid flat punch from an elastic layer of finite thickness10.1016/j.jmps.2020.103937 ↗
40. A bonded-particle model for rock10.1016/j.ijrmms.2004.09.011 ↗
41. Engineering living building materials for enhanced bacterial viability and mechanical properties
42. Concrete on Mars: options, challenges, and solutions for binder-based construction on the Red Planet10.1016/j.cemconcomp.2019.103349 ↗
43. Berechnung der fließgrenze von mischkristallen auf grund der plastizitätsbedingung für einkristalle
44. A mesoscale bond model for discrete element modeling of irregular cemented granular materials10.1016/j.compgeo.2022.105051 ↗
45. DEM simulation of bonded granular material. Part I: contact model and application to cemented sand10.1016/j.compgeo.2016.02.007 ↗
46. Numerical study of inter-particle bond failure by 3D discrete element method10.1002/nag.2414 ↗
47. Highly stretchable and tough hydrogels10.1038/nature11409 ↗
48. Elastoplastic modeling of metal matrix composites with evolutionary particle debonding10.1016/S0167-6636(02)00276-4 ↗
49. Analysis of hollow inclusion–matrix debonding in particulate composites10.1016/j.ijsolstr.2010.04.025 ↗
50. Statistical damage mechanics of polymer networks10.1021/acs.macromol.8b01052 ↗
51. Ueber die Beziehung zwischen den beiden Elasticitätsconstanten isotroper Körper10.1002/andp.18892741206 ↗
52. A novel material for in situ construction on Mars: experiments and numerical simulations10.1016/j.conbuildmat.2016.05.046 ↗
53. DEM analysis on the role of aggregates on concrete strength10.1016/j.compgeo.2019.103290 ↗
54. Effects of vacuum and microwave freeze drying on microstructure and quality of potato slices10.1016/j.jfoodeng.2010.05.021 ↗
55. A finite deformation method for discrete modeling: particle rotation and parameter calibration10.1007/s10035-009-0146-2 ↗
56. Osmotic instability in soft materials under well-controlled triaxial stress10.1016/j.jmps.2022.105195 ↗
57. Biomaterials by freeze casting10.1098/rsta.2010.0014 ↗
58. Transverse creep induced by interfacial diffusion in fiber-reinforced composites: a micromechanics model and computational validation10.1016/j.ijmecsci.2021.106877 ↗
59. Directed assembly of genetically engineered eukaryotic cells into living functional materials via ultrahigh-affinity protein interactions10.1126/sciadv.ade0073 ↗
60. 3D printable high-performance conducting polymer hydrogel for all-hydrogel bioelectronic interfaces10.1038/s41563-023-01569-2 ↗
61. A comprehensive approach for mesoscale discrete element modelling of mechanical and fracture behavior of concrete10.1007/s10035-018-0858-2 ↗
62. Micromechanical model for simulating the fracture process of rock10.1007/s00603-003-0014-z ↗
63. The investigation of rock indentation simulation based on discrete element method10.1007/s12205-016-0033-4 ↗