Thermomechanical fatigue cracking in fiber reinforced metal-matrix composites
Source abstract
Abstract
A theoretical model is developed for thermomechanical fatigue cracking in fiber reinforced metal-matrix composites. Interfacial debonding is assumed to occur readily, allowing fibers to slide relative to the matrix resisted by a uniform shear stress. The fibers therefore bridge any matrix crack which develops. The crack bridging traction law is obtained, including the effect of thermal expansion mismatch between the fiber and the matrix and a temperature dependence of the frictional shear stress. Any combination of thermal and mechanical cycling is considered as long as the slip zone along the fiber increases in length monotonically during each increment of cycling. However, for clarity, the results are presented in terms of in-phase and out-of-phase cycling of the thermal and mechanical loads at the same frequency. For each case, the stress distributions in the bridging zone as well as the stress intensity factors at the crack tip are computed for relevant regimes of the thermal and mechanical loading conditions. Predictions are made of the matrix fatigue crack growth under combined thermal and mechanical loading conditions. It is found that when the thermal expansion coefficient of the fiber is less than that of the matrix, a significant increase in the crack growth rate results in out-of-phase thermomechanical fatigue. On the other hand, there is decreased tendency for fibers to fail in this case. For in-phase thermomechanical fatigue, the crack growth rate is reduced but the stress in the fiber is larger than that due to mechanical loading alone, resulting in an increased tendency for fiber failure. The implications for life prediction for fiber reinforced metal-matrix composites are discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Fatigue crack growth in fiber reinforced metal matrix composites10.1016/0956-7151(94)90320-4 ↗
2. Fatigue crack growth with fiber failure in metal matrix composites10.1016/0266-3538(95)00009-7 ↗
3. Matrix fracture in fiber-reinforced ceramics10.1016/0022-5096(86)90035-9 ↗
4. Interfacial sliding near a free surface in a fibrous or layered composite during thermal cycling10.1016/0956-7151(90)90253-D ↗
5. Extrinsic factors in the mechanics of bridged cracks10.1016/0956-7151(91)90207-H ↗
6. Load ratio, notch and scale effects for bridged cracks in fibrous composites10.1016/0956-7151(92)90200-X ↗
7. Stable and unstable solutions for bridged cracks in various specimens10.1016/0956-7151(91)90126-L ↗
8. On the numerical solution of singular integral equations10.1090/qam/408277 ↗
9. Inelastic strains due to matrix cracking in unidirectional fiber-reinforced composites10.1016/0167-6636(94)90022-1 ↗
10. Models of fiber debonding and pullout in brittle composites with friction10.1016/0167-6636(90)90037-G ↗
11. Tensile fracture of brittle matrix composites: influence of fiber strength10.1016/0001-6160(87)90260-4 ↗
12. The mechanics of matrix cracking in brittle-matrix fiber composites10.1016/0001-6160(85)90124-5 ↗
13. Mechanics of matrix cracking in brittle-matrix fiber-reinforced composites
14. Matrix fatigue cracking in fiber composites10.1016/0167-6636(90)90004-Y ↗
15. Mode I fatigue cracking in a fiber reinforced metal matrix composite10.1016/0956-7151(93)90375-3 ↗
16. Interfacial fatigue in a fiber reinforced metal matrix composite10.1016/0956-7151(94)90208-9 ↗
17. On large scale sliding in fiber-reinforced composites10.1016/0022-5096(94)90064-7 ↗