journal article·2001-11

On the impact of local rotation on the evolution of an anisotropic plastic yield condition

H.P. Truong Qui, H. Lippmann

Publisher page

Abstract

Isotropic and kinematic hardening is combined with the local, average lattice rotation in order to describe the hardening behaviour of a polycrystalline metal in terms of continuum mechanics. This approach is adapted by means of parameter identification to experimental results by Boehler and Koss (In: Bruller O., Mannl V., Najar J. (Eds.), Advances in Continuum Mechanics. Springer, Berlin, (1991) pp. 143) Koss (Ecrouissage isotrope et anisotrope des aciers laminees soumis a de grandes deformations. Thesis, Universite Joseph Fourier, Grenoble I. (1992)) as well as to the experiments of the authors; a fair to good agreement is achieved. Although in particular, kinematic hardening fits the experimental data quite well it will be seen that the generalised, linear Prager hardening rule does not hold. Moreover it is found that the local rotation may differ considerably from the classical rotation, induced by the plastic flow field. Its magnitude, obtained by the authors, agrees well with the values, obtained via a direct texture analysis by Bunge and Nielsen using a similar material. Finally a conjecture by Boehler and Koss is checked, according to which an initial orthotropy vanishes completely under a secondary stretching along an axis, different from the axes of material symmetry, while subsequently a new orthotropy is generated along the axis of secondary stretch. This mechanism contradicts another one postulated by Kim and Yin (J. Mech. Phys. Solids 45 (1997) 841) according to which the axes of orthotropy rotate continuously from the initial to the asymptotic new position.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Tribology and Lubrication Engineering · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. On experimental testing methods for anisotropic materials
2. Evolution of anisotropy in sheet-steels subjected to off-axes large deformations.
3. Experimental determination of plastic spin in polycrystalline materials10.1016/S0749-6419(97)00018-1 ↗
4. The Cosserat continuum, a model for grain rotations in metals?10.1016/0749-6419(91)90038-Z ↗
5. Evolution of anisotropy under plane stress10.1016/S0022-5096(96)00085-3 ↗
6. Koss, S., 1992. Écrouissage isotrope et anisotrope des aciers laminées soumis à de grandes déformations. Thesis, Université Joseph Fourier, Grenoble I.
7. On Cosserat plasticity and plastic spin for isotropic materials
8. Cosserat plasticity and plastic spin10.1115/1.3005091 ↗
9. Kinematic hardening of trusses10.1007/BF00541385 ↗
10. Mechanik der plastischen Formänderung von Kristallen10.1002/zamm.19280080302 ↗
11. The theory of plasticity: a survey of recent achievements10.1243/PIME_PROC_1955_169_015_02 ↗
12. Smajlovic’, N., 1997. Das Cosserat-Kontinuum als Werkstoffmodell bei der Torsion anisotroper dünnwandiger Rohre. Fortschr.-Ber. VDI Reihe 5 Nr. 480. Düsseldorf: VDI-Verlag.
13. Zum Einfluss des “plastic spin” auf die zeitliche Entwicklung des Fließkriteriums
14. Truong Qui, H.P., Lippmann, H., 2001. Plastic spin and evolution of an anisotropic yield condition. Int. J. Mech. Sci., in press.10.1016/S0020-7403(01)00023-6 ↗