journal article·2026-09Open access

A constitutive model of porous polycrystals viscoplasticity

Louis Védrine, Pascal Hagenmuller

Abstract

Near their melting point, porous polycrystals, ranging from snow to metallic foams, exhibit a viscoplastic behaviour. It is controlledby the material microstructure, particularly its solid fraction, and by the properties of the dense matrix. This study investigates therelationship between solid fraction and the effective viscoplastic response. To this end, we simulate the viscoplastic behaviour ofthree-dimensional synthetic porous polycrystals across a wide range of solid fractions (0.25 − 1), different pore morphologies, andcrystalline structures, using full-field FFT-based simulations with local crystal plasticity laws. The numerical experiments revealthat the effective behaviour can be described by two material properties independent of the dense matrix properties: K and νvp.The factor K characterises the stress intensification within the load-bearing matrix. The viscoplastic Poisson ratio νvp describesthe coupling between hydrostatic and deviatoric stresses. Unlike the classical localisation functions f and c, which depend on thedense material properties, such as the stress exponent n, the parameters K and νvp allow for consistent comparisons across materialsand microstructures. We further show that K and νvp follow a simple mixture rule weighted by a power-law of the solid fraction:Φm. The exponent m is shown to reflect the heterogeneity of the local stresses. Introducing m > 1 as the key internal variableimproves the prediction of K and νvp as a function of the solid fraction, compared to previous models based on theoretical boundsand experimental data, which implicitly assume a homogeneous stress distribution within the ice matrix, i.e., m = 1. This unifiedframework bridges theoretical and empirical approaches. It provides a robust, physically grounded tool for predicting viscoplasticityin porous polycrystals under arbitrary loading conditions and across a wide range of solid fractions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Elasticity and Material Modeling · Composite Material Mechanics · Nonlocal and gradient elasticity in micro/nano structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Abouaf · 1985
2. Finite element simulation of hot isostatic pressing of metal powders10.1002/nme.1620250116 ↗
3. Iterative procedures for nonlinear integral equations10.1145/321296.321305 ↗
4. Armstrong · 2008
5. The natural fluctuations of firn densification and their effect on the geodetic determination of ice sheet mass balance10.1023/A:1005320713306 ↗
6. Practical applications of hotisostatic pressing diagrams: four case studies10.1007/BF02651618 ↗
7. Ashby · 2000
8. The properties of foams and lattices10.1098/rsta.2005.1678 ↗
9. Designing hybrid materials10.1016/S1359-6454(03)00441-5 ↗
10. Fundamental aspects of hot isostatic pressing: an overview10.1007/s11661-000-0078-2 ↗
11. Sorge’s law of densification of snow on high polar glaciers10.3189/S0022143000025144 ↗
12. Vostok ice core provides 160,000-year record of atmospheric CO210.1038/329408a0 ↗
13. Nanolattices: an emerging class of mechanical metamaterials10.1002/adma.201701850 ↗
14. Bernard · 2023
15. Disentangling creep and isothermal metamorphism during snow settlement with X-ray tomography10.1017/jog.2022.109 ↗
16. Microstructural changes in alumina during hot isostatic pressing10.1016/0921-5093(89)90562-5 ↗
17. Densification of titanium diboride by hot isostatic pressing and production of near-net-shape components10.1007/BF02649245 ↗
18. Blatny, L., Löwe, H., Gaume, J., et al., 2024. GRFsaw: a lightweight stochastic microstructure generator. arXiv: 2412.05168 [cs].
19. Numerical simulations and modeling of the effective plastic flow surface of a biporous material with pressurizedintergranular voids10.1016/j.cma.2017.05.004 ↗
20. Bouvard · 1989
21. Connecting the macro- and microstrain responses in technical porous ceramics: modeling and experimental validations10.1007/s10853-010-4899-0 ↗
22. A review of ice rheology for ice sheet modelling10.1016/0165-232X(89)90014-1 ↗
23. Effective properties in power-law creep
24. Viscoplastic modeling of texture development in polycrystalline ice with a self-consistent approach: comparison with bound estimates10.1029/96JB00412 ↗
25. Cazacu, O., Revil-Baudard, B., 2016. New analytic criterion for porous solids with pressure-insensitive matrix. arXiv: 1605.06717 [cond-mat].10.1016/j.ijplas.2016.11.002 ↗
26. Analysis of the damage initiation in a SiC/SiC composite tube from a direct comparison between large-scale numerical simulation and synchrotron X-ray micro-computed tomography10.1016/j.ijsolstr.2018.11.009 ↗
27. Densification of mixed metal powder at high temperature10.1016/S0020-7403(00)00054-0 ↗
28. Inelastic deformation of porous materials10.1016/0022-5096(89)90014-8 ↗
29. Multiaxial yield behaviour of Al replicated foam10.1016/j.jmps.2011.05.015 ↗
30. A finite-strain model for anisotropic viscoplastic porous media: I - theory10.1016/j.euromechsol.2008.11.002 ↗
31. Influence of the lode parameter and the stress triaxiality on the failure of elasto-plastic porous materials10.1016/j.ijsolstr.2012.02.006 ↗
32. A multiphase homogenization model for the viscoplastic response of intact sea ice: the effect of porosity and crystallographic texture10.1615/IntJMultCompEng.2019029125 ↗
33. Die Setzung der Schneedecke
34. Processing of titanium foams10.1002/adem.200405576 ↗
35. The effect of density anisotropy on the yielding and flow behavior of partially consolidated powder compacts10.1007/s11661-998-0362-0 ↗
36. Modeling the hot consolidation of ceramic and metal powders10.1007/BF02670676 ↗
37. A constitutive description of nonlinear materials containing voids10.1016/0167-6636(86)90029-3 ↗
38. The densification of powders by power-law creep during hot isostatic pressing10.1016/0956-7151(92)90196-L ↗
39. Analysis of consolidation of reinforced materials by power-law creep10.1016/0167-6636(94)90011-6 ↗
40. Constitutive potentials for dilutely voided nonlinear materials10.1016/0167-6636(84)90013-9 ↗
41. An investigation of densification behavior of nickel alloy powder during hot isostatic pressing10.1016/j.apt.2015.07.005 ↗
42. Effect of stacking fault energy on densification behavior of metal powder during hot isostatic pressing10.1016/j.matdes.2016.03.057 ↗
43. Microstructure-based simulations of the viscous densification of snow and firn
44. Flow simulation of a firn-covered cold glacier10.3189/S0260305500012246 ↗
45. Geometrical percolation threshold of overlapping ellipsoids10.1103/PhysRevE.52.819 ↗
46. Paper 30: strain-time, rate-stress and rate-temperature relations during large deformations in creep
47. Constitutive behaviour of metal powder during hot forming. Part I: experimental investigation with lead powder as a simulation material10.1016/S0997-7538(99)00102-3 ↗
48. Constitutive behaviour of metal powder during hot forming.: Part II: unified viscoplastic modelling10.1016/S0997-7538(99)00101-1 ↗
49. Gelebart, L., Derouillat, J., Doucet, N., Ouaki, F., Marano, A., Duverge, J., 2020. Amitex_FFTP. https://amitexfftp.github.io/AMITEX/general/index.html.
50. Gibson · 1997
51. Approximate models for ductile metals containing non-spherical voids–case of axisymmetric prolate ellipsoidal cavities10.1016/0022-5096(93)90029-F ↗
52. Green, D. J., 1998. An introduction to the mechanical properties of ceramics (p. 348).10.1017/CBO9780511623103 ↗
53. Constrained sintering: a delicate balance of scales10.1016/j.jeurceramsoc.2007.12.012 ↗
54. A plasticity theory for porous solids10.1016/0020-7403(72)90063-X ↗
55. Continuum theory of ductile rupture by void nucleation and growth: Part I–yield criteria and flow rules for porous ductile media10.1115/1.3443401 ↗
56. A micromechanical approach of damage in viscoplastic materials by evolution in size, shape and distribution of voids10.1016/S0045-7825(99)00220-0 ↗
57. A review of different manufacturing methods of metallic foams10.1021/acsomega.3c08613 ↗
58. Introducing the open-source mfront code generator: application to mechanical behaviours and material knowledge management within the PLEIADES fuel element modelling platform10.1016/j.camwa.2015.06.027 ↗
59. Hot-isostatic pressing diagrams: new developments10.1016/0001-6160(85)90177-4 ↗
60. Fourth-order bounds on the effective bulk and shear moduli of random dispersions of penetrable spheres
61. Elastic properties of reinforced solids: some theoretical principles10.1016/0022-5096(63)90036-X ↗
62. The relationship between solid fraction and mechanical properties of compacts – the percolation theory model approach10.1016/0378-5173(88)90007-5 ↗
63. The mechanical response of cellular materials with spinodal topologies10.1016/j.jmps.2019.01.002 ↗
64. Connections between topology and macroscopic mechanical properties of three-dimensional open-pore materials10.3389/fmats.2018.00069 ↗
65. Mérope: a microstructure generator for simulation of heterogeneous materials10.1016/j.jocs.2024.102359 ↗
66. Viscoplasticity of voided cubic crystals under hydrostatic loading10.1016/j.ijsolstr.2018.05.022 ↗
67. Densification behavior and grain growth of tool steel powder under high temperature10.1016/S1359-6454(98)00261-4 ↗
68. Deformation characteristics and plasticity theory of sintered powder materials
69. Analysis of cold and hot isostatic compaction of spherical particles10.1016/1359-6454(96)00003-1 ↗
70. Dilatational viscoplasticity of polycrystalline solids with intergranular cavities10.1080/14786435.2011.561811 ↗
71. Exact results and approximate models for porous viscoplastic solids10.1016/0749-6419(94)90001-9 ↗
72. Porous metals and metallic foams: current status and recent developments10.1002/adem.200800241 ↗
73. Lemaitre · 1994
74. Lemaitre · 2020
75. Liu · 2024
76. Morphological similarity and structure-dependent scaling laws of nanoporous gold from different synthesis methods10.1016/j.actamat.2017.08.039 ↗
77. Identification of the norton-green compaction model for the prediction of the Ti-6Al-4V densification during the spark plasma sintering process10.1002/adem.201600348 ↗
78. Viscoplastic behaviour of porous metallic materials saturated with liquid Part I: constitutive equations10.1016/S0749-6419(97)00009-0 ↗
79. The constitutive law of nonlinear viscous and porous materials10.1016/0022-5096(92)90004-L ↗
80. Overall viscoplastic behavior of non-irradiated porous nuclear ceramics10.1016/j.mechmat.2005.11.004 ↗
81. Multiscale modeling of ice deformation behavior10.1016/j.jsg.2013.05.002 ↗
82. Numerical simulation of the densification behaviour of metal powder during hot isostatic pressing10.1002/nme.1620250117 ↗
83. Consolidation/synthesis of materials by electric current activated/assisted sintering10.1016/j.mser.2008.09.003 ↗
84. The role of network topology on the uniaxial tensile behaviour of low density random open cellular structures10.1016/j.mtla.2022.101396 ↗
85. Viscoplastic behavior of a porous polycrystal with similar pore and grain sizes: application to nuclear MOX fuel materials10.1016/j.ijsolstr.2021.111316 ↗
86. Pore shape effects during consolidation processing10.1016/S1359-6454(96)00103-6 ↗
87. Effect of green density on densification and creep during sintering10.1111/j.1151-2916.1991.tb04053.x ↗
88. Creep during sintering of porous compacts10.1111/j.1151-2916.1986.tb04694.x ↗
89. Enhanced firn densification in high-accumulation shear margins of the NE greenland ice stream10.1029/2017JF004604 ↗
90. Computation of the linear elastic properties of random porous materials with a wide variety of microstructure10.1098/rspa.2001.0900 ↗
91. Analysis of snow microstructure by means of X-ray diffraction contrast tomography10.1002/adem.201000221 ↗
92. Creep flow and pressure relaxation in bubbly medium10.1016/0020-7683(95)00292-8 ↗
93. The influence of temperature on the small-strain viscous deformation mechanics of snow: a comparison with polycrystalline ice10.3189/172756403781815410 ↗
94. Influence of stress, temperature and crystal morphology on isothermal densification and specific surface area decrease of new snow10.5194/tc-8-1825-2014 ↗
95. FFT-based homogenization for microstructures discretized by linear hexahedral elements10.1002/nme.5336 ↗
96. On the compressive strength of weak snow layers of depth hoar10.1017/jog.2025.16 ↗
98. Modeling the consolidation behavior of an alpha-two titanium aluminide powder10.1016/0924-0136(94)01726-H ↗
99. Powder-based additive manufacturing: a critical review of materials, methods, opportunities, and challenges10.1002/adem.202300375 ↗
100. Plasticity theory for porous metals10.1016/0020-7403(76)90030-8 ↗