journal article·2026-09Open access

Discontinuous plasticity in Sn single crystals: a combined experiment and modelling study

Hai Xin, Tianhong Gu, Finn Giuliani, T. Ben Britton, Mei Zhan, Yilun Xu, Zebang Zheng

Abstract

Discontinuous plastic flow (DPF) in single-crystal tin (Sn) is investigated through a combined rate-dependent discrete dislocation plasticity (DDP) framework and micropillar compression experiments. The observed stress oscillations are attributed to the thermally activated pinning-depinning dynamics of dislocations interacting with obstacles. The magnitude of these serrations shows a clear dependence on crystallographic orientation, which stems from the variation in thermal activation behavior across different slip systems. By calibrating the thermal activation parameters in the DDP model, the creep behavior of Sn single crystals is quantitatively predicted. A correlation is established between the secondary creep rate and the amplitude of stress oscillations measured in micropillar tests. This study thus offers a physics-based pathway-independently verified-to predict slip-dominated creep rates from small-scale mechanical testing, bridging microstructural features with long-term mechanical performance, and yielding critical insights into the reliability of solder joints.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Boron and Carbon Nanomaterials Research · Heusler alloys: electronic and magnetic properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. Effects of pre-strain on the compressive stress–strain response of Mo-alloy single-crystal micropillars10.1016/j.actamat.2008.05.030 ↗
2. Generalized stacking fault energies and slip in β-tin10.1016/j.scriptamat.2016.05.038 ↗
3. Influence of Sn grain size and orientation on the thermomechanical response and reliability of Pb-free solder joints10.1109/TCAPT.2008.916835 ↗
4. Thermal fatigue evaluation of Pb-free solder joints: results, lessons learned, and future trends10.1007/s11837-015-1595-1 ↗
5. Towards a greater understanding of serrated flows in an Al-containing high-entropy-based alloy10.1016/j.ijplas.2018.11.011 ↗
6. A review of the serrated-flow phenomenon and its role in the deformation behavior of high-entropy alloys10.3390/met10081101 ↗
7. A review of lead-free solders for electronics applications10.1016/j.microrel.2017.06.016 ↗
8. Creep behaviors along characteristic crystal orientations of Sn and Sn-1.8Ag by using nanoindentation10.1007/s11837-019-03557-x ↗
9. Impression creep of β-tin single crystals10.1016/0025-5416(79)90164-2 ↗
10. A predictive mechanism for dynamic strain ageing in aluminium–magnesium alloys10.1038/nmat1765 ↗
11. The role of elastic and plastic anisotropy of Sn in recrystallization and damage evolution during thermal cycling in SAC305 solder joints10.1007/s11664-011-1811-x ↗
12. Effective solder for improved thermo-mechanical reliability of solder joints in a ball grid array (BGA) soldered on printed circuit board (PCB)10.1007/s11664-020-08525-9 ↗
13. Deformation of lamellar TiAl alloys by longitudinal twinning10.1016/j.scriptamat.2016.03.004 ↗
14. The strength of main obstacles to dislocation motion in white tin crystals10.2320/jinstmet1952.51.9_830 ↗
15. Discrete dislocation plasticity: a simple planar model10.1088/0965-0393/3/5/008 ↗
16. Sample size effects on grain boundary sliding10.1016/j.scriptamat.2015.11.029 ↗
17. Dynamic strain ageing in Ni-base superalloy 720Li10.1016/j.actamat.2008.11.005 ↗
18. Evaluating creep deformation in controlled microstructures of Sn-3Ag-0.5Cu solder10.1007/s11664-018-6744-1 ↗
19. In-situ study of creep in Sn-3Ag-0.5Cu solder10.1016/j.actamat.2020.06.013 ↗
20. The role of lengthscale in the creep of Sn-3Ag-0.5Cu solder microstructures10.1007/s11664-020-08697-4 ↗
21. Understanding the deformation creep and role of intermetallic compound-microstructure in Sn-Ag-Cu solders10.1016/j.msea.2024.147429 ↗
22. Nanomechanical testing at high strain rates: new instrumentation for nanoindentation and microcompression10.1016/j.matdes.2018.03.050 ↗
23. Hedges · 1960
24. Observations of dislocation motion by etch hillocks in white tin single crystals10.1143/JJAP.9.1210 ↗
25. Surface effects and the size-dependent hardening and strengthening of nickel micropillars10.1016/j.jmps.2012.04.009 ↗
26. Stochastic nature of incipient plasticity in a body-centered cubic medium-entropy alloy10.1016/j.actamat.2024.120244 ↗
27. Enhance cryogenic ductility and strength of body-centered tetragonal Sn by pre-twinning and recrystallization10.1016/j.msea.2023.145810 ↗
28. Mechanical properties of Cu6Sn5 intermetallic by micropillar compression testing10.1016/j.scriptamat.2010.05.009 ↗
29. Deformation behaviors of [110]AND [112] oriented β-Sn single crystals
30. Local strain rate sensitivity of single α phase within a dual-phase Ti alloy10.1016/j.actamat.2016.01.057 ↗
31. Microscale deformation behavior of bicrystal boundaries in pure tin (Sn) using micropillar compression10.1016/j.actamat.2016.08.030 ↗
32. Time-dependent deformation of Sn micropillars10.1016/j.matdes.2016.04.039 ↗
33. Spatial coupling in jerky flow using polycrystal plasticity10.1016/S1359-6454(03)00114-9 ↗
34. Mechanisms of creep deformation in pure Sn solder joints10.1007/s11664-012-2380-3 ↗
35. Cold dwell fatigue analyses integrating crystal-level strain rate sensitivity and microstructural heterogeneity10.1016/j.ijfatigue.2021.106398 ↗
36. Combining microstructural characterization with crystal plasticity and phase-field modelling for the study of static recrystallization in pure aluminium10.1016/j.commatsci.2019.109419 ↗
37. Experimental and crystal plasticity study on deformation bands in single crystal and multi-crystal pure aluminium10.1016/j.actamat.2019.11.006 ↗
38. Cryogenic in situ microcompression testing of Sn10.1016/j.actamat.2014.06.026 ↗
39. A review of mechanical properties of lead-free solders for electronic packaging10.1007/s10853-008-3125-9 ↗
40. Mechanical characterizations of η′-Cu6(Sn, In)5 intermetallic compound solder joint: getting prepared for future nanobumps10.1016/j.jmrt.2024.03.146 ↗
41. Creep deformation characteristics of tin and tin-based electronic solder alloys10.1007/s11661-005-0142-z ↗
42. Microstructure evolution in a Pb-free solder alloy during mechanical fatigue10.1016/j.msea.2006.05.144 ↗
43. Predicting active slip systems in β-Sn from ideal shear resistance
44. High-temperature micropillar compression creep testing of constituent phases in lead-free solder10.1002/adem.201500089 ↗
45. On the extraction of yield stresses from micro-compression experiments10.1016/j.msea.2020.140323 ↗
46. Size and orientation dependent mechanical behavior of body-centered tetragonal Sn at 0.6 of the melting temperature10.1016/j.actamat.2016.05.055 ↗
47. Microstructure characterization and elastic-plastic self-consistent simulation studies of anisotropic deformation of ββ-tin10.1016/j.ijplas.2023.103658 ↗
48. High-temperature tensile and creep behavior of Cu–Nb composites: a discrete dislocation plasticity investigation10.1016/j.ijplas.2020.102876 ↗
49. On the interaction of grain-scale and hydride-scale stresses in hydrogen enriched zirconium alloy nuclear cladding via combined discrete dislocation plasticity and crystal plasticity finite element modelling10.1016/j.mechmat.2024.105033 ↗
50. A discrete dislocation plasticity study of the micro-cantilever size effect10.1016/j.actamat.2015.01.030 ↗
51. Dislocation-based serrated plastic flow of high entropy alloys at cryogenic temperatures10.1016/j.actamat.2020.09.052 ↗
52. Sample dimensions influence strength and crystal plasticity
53. An HR-EBSD and computational crystal plasticity investigation of microstructural stress distributions and fatigue hotspots in polycrystalline copper10.1016/j.actamat.2016.05.033 ↗
54. Kinematic and thermal characteristics of Lüders and Portevin-Le Châtelier bands in a medium Mn transformation-induced plasticity steel10.1016/j.actamat.2016.10.069 ↗
55. Variable temperature micropillar compression to reveal basal slip properties of Zircaloy-410.1016/j.scriptamat.2018.12.014 ↗
56. On the plastic deformation of a CoCrFeNiW-C alloy at elevated temperatures: part II. Grain boundary sliding and damage mechanisms10.1016/j.actamat.2023.118898 ↗
57. The influence of alloying on slip intermittency and the implications for dwell fatigue in titanium10.1038/s41467-022-33437-z ↗
58. Mechanical characterizations of single-crystalline (Cu, Ni)6Sn5 through uniaxial micro-compression10.1016/j.msea.2019.03.026 ↗
59. Mechanical reliability assessment of Cu_6Sn_5 intermetallic compound and multilayer structures in Cu/Sn interconnects for 3D IC applications
60. Anisotropic thermal expansion of Ni 3 Sn 4, Ag 3 Sn, Cu 3 Sn, Cu 6 Sn 5 and βsn10.1016/j.intermet.2017.08.002 ↗
61. The role of microstructure in the thermal fatigue of solder joints10.1038/s41467-024-48532-6 ↗
62. Investigation of twin-dislocation interactions using a novel discrete dislocation plasticity framework10.1016/j.ijplas.2025.104465 ↗
63. Intermetallic size and morphology effects on creep rate of Sn-3Ag-0.5Cu solder10.1016/j.ijplas.2020.102904 ↗
64. Multi-scale plasticity homogenization of Sn–3Ag-0.5Cu: from β-Sn micropillars to polycrystals with intermetallics10.1016/j.msea.2022.143876 ↗
65. Slip intermittency and dwell fatigue in titanium alloys: a discrete dislocation plasticity analysis10.1016/j.jmps.2023.105384 ↗
66. Mechanistic understanding of microstructural effects on the thermal fatigue resistance of solder joints10.1016/j.jmps.2024.105623 ↗
67. In-situ compression tests and analysis of strength-ductility synergy in heterogeneous structured copper-tin composite joint10.1016/j.msea.2024.147000 ↗
68. Electron-microscopic evidence of transformation-induced lattice defects in grey tin10.1007/BF00550683 ↗
69. Deformation behavior of tin and some tin alloys
70. Anisotropic crystal plasticity finite element modeling of the effect of crystal orientation and solder joint geometry on deformation after temperature change10.1007/s11664-008-0595-0 ↗
71. Intrinsic anisotropy of strain rate sensitivity in single crystal alpha titanium10.1016/j.actamat.2016.07.044 ↗
72. Serration and noise behaviors in materials10.1016/j.pmatsci.2017.06.004 ↗
73. Rate sensitivity in discrete dislocation plasticity in hexagonal close-packed crystals10.1016/j.actamat.2016.01.035 ↗
74. The dislocation configurational energy density in discrete dislocation plasticity10.1016/j.jmps.2019.04.015 ↗