Roles of lattice distortion and chemical short-range order in dislocation drag and strain-rate sensitivity over wide strain rates
Source abstract
Abstract
Multi-principal element alloys (MPEAs) exhibit exceptional mechanical properties compared to conventional alloys, rendering them highly suitable for extreme environments. However, unique features in MPEAs, such as severe lattice distortion (LD) and chemical short-range order (CSRO), pose considerable challenges for traditional dislocation drag models in accurately predicting dynamic responses, particularly at high or ultra-high strain rates. In this study, we propose a multiscale framework that integrates atomic-scale molecular dynamics, mesoscale crystal plasticity finite element modeling, and macroscale quasi-static experiments to investigate dislocation drag behavior and strain-rate-dependent responses in CoCrNi MPEAs by taking into account the influence of LD and CSRO. The variation of local LD leads to a spatially heterogeneous dislocation drag behavior, and the interaction between dislocations and local CSRO results in a transient strengthening. Both are captured by a modified dislocation drag model and are transferred to the multiscale model. The multiscale model closely aligns with dynamic experimental results and effectively captures the strain-rate effects of CoCrNi MPEA. Furthermore, we examine the influence of grain-level textures, including Copper, Cube, Goss, and random orientations, using the developed multiscale model. The results indicate that grain orientation significantly impacts drag activation and stress localization, leading to the lowest strain-rate sensitivity of the Cube texture. This work provides an in-depth elucidation of the effects of LD and CSRO on dislocation activities and dynamic responses, offering new insights into multiscale modeling and facilitating the tailored design of microstructures in MPEAs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. A study on slip activation for a coarse-grained and single crystalline CoCrNi medium entropy alloy10.1016/j.intermet.2019.106682 ↗
2. Critical resolved shear stress for slip and twin nucleation in single crystalline FeNiCoCrMn high entropy alloy10.1016/j.matchar.2017.05.014 ↗
3. Shear localization in polycrystalline metal at high-strain rates with dynamic recrystallization: crystal plasticity modeling and texture effect10.1016/j.ijplas.2023.103616 ↗
4. Overview no. 42 texture development and strain hardening in rate dependent polycrystals10.1016/0001-6160(85)90188-9 ↗
5. Strain localization in ductile single crystals10.1016/0022-5096(77)90001-1 ↗
6. Elastic precursor wave decay in shock-compressed aluminum over a wide range of temperature10.1063/1.5008280 ↗
7. A dislocation-based constitutive model for viscoplastic deformation of fcc metals at very high strain rates10.1016/j.ijplas.2010.03.002 ↗
8. Clarifying the definition of ’transonic’screw dislocations10.1080/14786435.2021.1876269 ↗
9. Line tension of a dislocation moving through an anisotropic crystal10.1080/14786435.2018.1489152 ↗
10. Cocktail effects in understanding the stability and properties of face-centered-cubic high-entropy alloys at ambient and cryogenic temperatures10.1016/j.scriptamat.2020.06.008 ↗
11. The stacking-fault energy of nickel10.1080/14786437708232942 ↗
12. Effect of dislocation character on the CRSS10.1016/j.actamat.2023.118982 ↗
13. On the characterization of geometrically necessary dislocations in finite plasticity10.1016/S0022-5096(00)00084-3 ↗
14. Evolution of substructure of a non-equiatomic femncrco high entropy alloy deformed at ambient temperature10.1007/s11661-019-05438-z ↗
15. Correlating dislocation mobility with local lattice distortion in refractory multi-principal element alloys10.1016/j.scriptamat.2022.115048 ↗
16. Short-range ordering alters the dislocation nucleation and propagation in refractory high-entropy alloys10.1016/j.mattod.2023.03.009 ↗
17. Effects of phonons on mobility of dislocations and dislocation arrays10.1016/j.scriptamat.2017.04.033 ↗
18. Irradiation effects in high-entropy alloys and their applications
19. An approximate theory of order in alloys10.1103/PhysRev.77.669 ↗
20. Dong · 2024
21. Mechanical responses and crystal plasticity model of CoCrNi medium-entropy alloy under ramp wave compression10.1063/5.0206773 ↗
22. Lengthscale-dependent, elastically anisotropic, physically-based hcp crystal plasticity: application to cold-dwell fatigue in ti alloys10.1016/j.ijplas.2006.10.013 ↗
23. Dislocation theory based constitutive modelling: foundations and applications10.1016/S0924-0136(98)00208-8 ↗
24. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
25. Hierarchical multiscale crystal plasticity framework for plasticity and strain hardening of multi-principal element alloys10.1016/j.jmps.2022.105067 ↗
26. A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable10.1016/0001-6160(88)90030-2 ↗
27. Latent hardening in copper and aluminium single crystals10.1016/0001-6160(80)90162-5 ↗
28. Strain-rate-sensitive mechanical response, twinning, and texture features of NiCoCrFe high-entropy alloy: experiments, multi-level crystal plasticity and artificial neural networks modeling10.1016/j.jallcom.2020.155911 ↗
29. High-entropy alloys10.1038/s41578-019-0121-4 ↗
30. Entropy factors for thermally activated unpinning of dislocations10.1063/1.1713833 ↗
31. Strain rate-dependent plastic behavior of TWIP steel investigated by crystal plasticity model10.1016/j.msea.2023.145986 ↗
32. The deformation and ageing of mild steel: II characteristics of the Lüders deformation10.1088/0370-1301/64/9/302 ↗
33. Coupling between phase transition and spallation in hierarchically structured high-strength martensitic steels under shock loading10.1016/j.engfracmech.2024.110431 ↗
34. Effects of lattice distortion and chemical short-range order on creep behavior of medium-entropy alloy CoCrNi10.1016/j.mechmat.2022.104549 ↗
35. The shear softening and dislocation glide competition due to the shear-induced short-range order degeneration in CoCrNi medium-entropy alloy10.1016/j.jmst.2023.12.024 ↗
36. Analytic model of the remobilization of pinned glide dislocations from quasi-static to high strain rates10.1016/j.ijplas.2015.01.008 ↗
37. Analytic model of dislocation density evolution in fcc polycrystals accounting for dislocation generation, storage, and dynamic recovery mechanisms10.1016/j.ijplas.2021.103178 ↗
38. Effects of lattice distortion and chemical short-range order on the mechanisms of deformation in medium entropy alloy cocrni10.1016/j.actamat.2020.08.044 ↗
39. Atomistic simulations of dynamics of an edge dislocation and its interaction with a void in copper: a comparative study10.1088/1361-651X/ab8358 ↗
40. Relativistic effect inducing drag on fast-moving dislocation in discrete system10.1016/j.ijplas.2019.11.008 ↗
41. Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues10.1016/S1359-6462(02)00335-4 ↗
42. Molecular-dynamics simulation of edge-dislocation dynamics in aluminum10.1134/S1028335808060013 ↗
43. Reasons for the superior mechanical properties of medium-entropy crconi compared to high-entropy crmnfeconi10.1016/j.actamat.2017.02.036 ↗
44. Finite-strain elastic-plastic theory with application to plane-wave analysis10.1063/1.1708953 ↗
45. Heterogeneous lattice strain strengthening in severely distorted crystalline solids10.1073/pnas.2200607119 ↗
46. Numerical simulations of adiabatic shear localization in textured FCC metal based on crystal plasticity finite element method10.1016/j.msea.2018.08.105 ↗
47. Evolution of short-range order and its effects on the plastic deformation behavior of single crystals of the equiatomic cr-co-ni medium-entropy alloy10.1016/j.actamat.2022.118537 ↗
48. Lattice-distortion dependent yield strength in high entropy alloys10.1016/j.msea.2020.139323 ↗
49. Strain rate effects on the mechanical responses in Mo-alloyed CoCrNi medium entropy alloys10.1016/j.msea.2022.143944 ↗
50. Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways10.1038/s41467-019-11464-7 ↗
51. Fluctuations in local shear-fault energy produce unique and dominating strengthening in metastable complex concentrated alloys10.1073/pnas.2209188120 ↗
52. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
53. Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys10.1038/s41578-020-0212-2 ↗
54. A unified material model including dislocation drag and its application to simulation of orthogonal cutting of OFHC copper10.1016/j.jmatprotec.2014.09.021 ↗
55. Atomistically informed partial dislocation dynamics of multi-principal element alloys
56. Peierls-nabarro modeling of dislocations in high-entropy alloys
57. A hierarchical multiscale crystal plasticity model for refractory multi-principal element alloys10.1016/j.ijmecsci.2024.109140 ↗
58. Cyclic plasticity of an interstitial high-entropy alloy: experiments, crystal plasticity modeling, and simulations10.1016/j.jmps.2020.103971 ↗
59. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
60. Atomistic simulations of dislocation mobility in Al, Ni and Al/Mg alloys10.1088/0965-0393/13/3/007 ↗
61. Zur Kristallplastizität. III: Über den Mechanismus des Gleitvorganges10.1007/BF01341480 ↗
62. Zur Kristallplastizität. I. Tieftemperaturplastizität und Beckersche Formel10.1007/BF01341478 ↗
63. Study of grain boundary orientation gradients through combined experiments and strain gradient crystal plasticity modeling10.1016/j.ijplas.2022.103360 ↗
64. Gradient cell–structured high-entropy alloy with exceptional strength and ductility10.1126/science.abj8114 ↗
65. Strain rate effects of dynamic compressive deformation on mechanical properties and microstructure of cocrfemnni high-entropy alloy10.1016/j.msea.2018.02.031 ↗
66. The cleavage strength of polycrystals
67. High-entropy alloys: potential candidates for high-temperature applications–an overview10.1002/adem.201700645 ↗
68. Dynamic behavior of crmnfeconi high-entropy alloy in impact tension10.1016/j.ijimpeng.2021.104008 ↗
69. Large-scale 3d random polycrystals for the finite element method: generation, meshing and remeshing10.1016/j.cma.2011.01.002 ↗
70. Atomistic simulations of dislocation behavior in a model FCC multicomponent concentrated solid solution alloy10.1016/j.actamat.2017.05.071 ↗
71. Damask–the düsseldorf advanced material simulation kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale10.1016/j.commatsci.2018.04.030 ↗
72. Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: theory, experiments, applications10.1016/j.actamat.2009.10.058 ↗
73. Calculation of excess free energies of precipitates via direct thermodynamic integration across phase boundaries
74. Scalable parallel monte carlo algorithm for atomistic simulations of precipitation in alloys
75. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
76. Crystal plasticity FE modeling of ti alloys for a range of strain-rates. part i: a unified constitutive model and flow rule10.1016/j.ijplas.2016.09.002 ↗
77. A crystal plasticity based strain rate dependent model across an ultra-wide range10.1016/j.ijplas.2024.104056 ↗
78. Effects of atomic size misfit on dislocation mobility in FCC dense solid solution: atomic simulations and phenomenological modeling10.1016/j.ijplas.2022.103504 ↗
79. The origin of jerky dislocation motion in high-entropy alloys10.1038/s41467-022-32134-1 ↗
80. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
81. Simulation of the rolling and shear texture of brass by the taylor theory adapted for mechanical twinning10.1016/0001-6160(78)90111-6 ↗
82. Theory of strengthening in fcc high entropy alloys10.1016/j.actamat.2016.07.040 ↗
83. Average-atom interatomic potential for random alloys10.1103/PhysRevB.93.104201 ↗
84. Chemical medium-range order in a medium-entropy alloy10.1038/s41467-022-28687-w ↗
85. Strain-rate-dependent behaviors of CoCrNiSi0.2 medium-entropy alloy: deformation mechanism and microstructural-based constitutive modeling
86. A crystal plasticity model for twinning-and transformation-induced plasticity10.1016/j.actamat.2016.07.032 ↗
87. Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure10.1016/j.actamat.2018.12.012 ↗
88. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
89. Role of local chemical fluctuations in the shock dynamics of medium entropy alloy CoCrNi10.1016/j.actamat.2021.117380 ↗
90. Short-range order localizing diffusion in multi-principal element alloys10.1016/j.scriptamat.2021.114450 ↗
91. Temperature-dependent, multi-mechanism crystal plasticity reveals the deformation and failure behaviour of multi-principal element alloys10.1016/j.jmps.2024.105549 ↗
92. Prisms-plasticity: an open-source crystal plasticity finite element software10.1016/j.commatsci.2019.109078 ↗
93. Revisiting the strain rate sensitivity of the flow stress of copper: theory and experiment10.1063/5.0225090 ↗
94. Carbothermal shock synthesis of high-entropy-alloy nanoparticles10.1126/science.aan5412 ↗
95. Yield strength and misfit volumes of NiCoCr and implications for short-range-order10.1038/s41467-020-16083-1 ↗
96. Atomistic simulations of dislocation mobility in refractory high-entropy alloys and the effect of chemical short-range order10.1038/s41467-021-25134-0 ↗
97. Friction stress and hall-petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing10.1016/j.scriptamat.2017.02.042 ↗
98. Effect of elemental combination on friction stress and hall-petch relationship in face-centered cubic high/medium entropy alloys10.1016/j.actamat.2019.04.017 ↗
99. Mechanical properties and stacking fault energies of nifecrcomn high-entropy alloy10.1007/s11837-013-0771-4 ↗
100. The effect of dislocation drag on the stress-strain behavior of FCC metals10.1016/0956-7151(92)90166-C ↗