journal article·2007-12Open access

Investigation of Al-Al2O3 Cold Spray Coating Formation and Properties

Eric Irissou, Jean-Gabriel Legoux, Bernard Arsenault, Christian Moreau

Journal of Thermal Spray Technology· Volume 16· Issue 5-6

Abstract

Abstract Coating build-up mechanisms and properties of cold sprayed aluminum-alumina cermets were investigated. Two spherical aluminum powders having average diameters of 36 and 81 microns were compared. Those powders were blended with alumina at several concentrations. Coatings were produced using a commercial low pressure cold spray system. Powders and coatings were characterized by electronic microscopy and microhardness measurements. In-flight particle velocities were monitored for all powders. The deposition efficiency was measured for all experimental conditions. Coating performance and properties were investigated by performing bond strength test, abrasion test and corrosion tests, namely, salt spray and alternated immersion in salt water tests. These coating properties were correlated to the alumina fraction either in the starting powder or in the coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Flame retardant materials and properties · Materials Engineering and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. S.H. Thurston, Method of Impacting One Metal Upon Another, U.S. Patent 705,701, August 12, 1902
2. C.F. Rocheville, Device for Treating the Surface of a Workpiece, U.S. Patent 3,100,724, August 13, 1963
3. A.P. Alkhimov, V.F. Kosarev, and A.N. Papyrin, A Method of ‘Cold’ Gas-Dynamic Deposition, Sov. Phys. Doklady, (1990), 35(12), p 1047-1049
4. A. Shkodkin, A. Kashirin, O. Klyuev, and T. Buzdygar, Metal Particle Deposition Stimulation by Surface Abrasive Treatment in Gas Dynamic Spraying, J. Therm. Spray Technol., 2006, 15(3), p 382-38610.1361/105996306X124383 ↗
5. A.I. Kashirin, O.F. Klyuev, and T.V. Buzdygar, Apparatus for Gas-Dynamic Coating, U.S. Patent 6,402,050, June 11, 2002
6. A.P. Alkhimov, A.N. Papyrin, V.F. Kosarev, N.I. Nesterovich, and M.M. Shushpanov, Gas-Dynamic Spraying Method for Applying a Coating, U.S. Patent 5,302,414, April 12, 1994
7. R.G. Maev and V. Leshchynsky, Air Gas Dynamic Spraying of Powder Mixtures: Theory and Application, J. Therm. Spray Technol., 2006, 15(2), p 198-20510.1361/105996306X108048 ↗
8. R.G. Maev and V. Leshchinsky, Low Pressure Gas Dynamic Spray: Shear Localization During Particle Shock Consolidation, Building on 100 Years of Success: Proceedings of the 2006 International Thermal Spray Conference, B.R. Marple, M.M. Hyland, Y.C. Lau, R.S. Lima, and J. Voyer, Eds., May 15-18, 2006 (Seattle, WA, USA), ASM International, 200610.31399/asm.cp.itsc2006p0221 ↗
9. E. Irissou and B. Arsenault, Corrosion Study of Cold Sprayed Aluminum Coatings onto Al 7075 Alloy Substrates, Global Coating Solutions: Proceedings of the 2007 International Thermal Spray Conference, B.R. Marple, M.H. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, and G. Montavon, Eds., May 14-16, 2007, (Beijing, China), ASM International, 2007, p 549-55410.31399/asm.cp.itsc2007p0549 ↗
10. Z.B. Zhao, B.A. Gillispie, J.R. Smith, Coating Deposition by the Kinetic Spray Process, Surf. Coat. Technol., 2006, 200(16-17), p 4746-475410.1016/j.surfcoat.2005.04.033 ↗
11. H. Assadi, F. Gartner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51(15), p 4379-439410.1016/S1359-6454(03)00274-X ↗
12. R.C. Dykhuizen and M.F. Smith, Gas Dynamic Principles of Cold Spray, J. Therm. Spray Technol., 1998, 7(2), p 205-21210.1361/105996398770350945 ↗
13. T. Schmidt, F. Gartner, H. Assadi, and H. Kreye, Development of a Generalized Parameter Window for Cold Spray Deposition, Acta Mater., 2006, 54(3), p 729-74210.1016/j.actamat.2005.10.005 ↗