journal article·2010-01Open access

From Powders to Thermally Sprayed Coatings

Pierre Fauchais, Ghislain Montavon, Ghislaine Bertrand

Journal of Thermal Spray Technology· Volume 19· Issue 1-2

Abstract

Since the early stages of thermal spray, it has been recognized that the powder composition, size distribution, shape, mass density, mechanical resistance, components distribution for composite particles play a key role in coating microstructure and thermo mechanical properties. The principal characteristics of particles are strongly linked to the manufacturing process. Coatings also depend on the process used to spray particles and spray parameters. Many papers have been devoted to the relationships existing between coating properties and structures at different scales and manufacturing processes. In many conventional spray conditions resulting in micrometric structures, among the different parameters, good powder flow ability, and dense particles are important features. Thermal plasma treatment, especially by RF plasma, of particles, prepared by different manufacturing processes, allows achieving such properties and it is now developed at an industrial scale. Advantages and drawbacks of this process will be discussed. Another point, which will be approached, is the self-propagating high-temperature synthesis, depending very strongly upon the starting composite particle manufacturing. However, as everybody knows, “small is beautiful” and nano- or finely structured coatings are now extensively studied with spraying of: (i) very complex alloys containing multiple elements which exhibit a glass forming capability when cooled-down, their under-cooling temperature being below the glass transition temperature; (ii) conventional micrometer-sized particles (in the 30-90 μm range) made of agglomerated nanometer-sized particles; (iii) sub-micrometer- or nanometer-sized particles via a suspension in which also, instead of particles, stable sol of nanometer-sized particles can be introduced; and (iv) spray solutions of final material precursor. These different processes using plasma, HVOF or sometimes flame and also cold-gas spray will be discussed together with the production of nanometer-sized particles via the chemical reaction method or by a special type of milling: the cryogenic milling process often referred to as “cryomilling.”
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Handbook of Powder Technology, Particle Breakage, A. D. Salman, M. Ghadiri, and M.J. Hounslow, Ed., Elsevier B.V., Lausanne, Switzerland, 12, 2007, p 1-1227
2. Handbook of Thermal Spray Technology, J.R. Davis, Ed., ASM International, Materials Park, OH, USA, 2004
3. Anonymous, Thermal Spraying, Practice, Theory and Application, American Welding Society, Miami, FL, USA, 1985
4. L. Pawlowski, The Science and Engineering of Thermal Spray Coatings, Wiley and Sons, New York, NY, USA, 1995
5. E.J. Kubel, Powders Dictate Thermal Spray Coating Properties, Adv. Mater. Processes., 1990, 12, p 24-32
6. B. Kolman, J. Forman, J. Dubsky, and P. Chraska, Homogeneity Studies of Powders and Plasma Sprayed Deposits, Mikrochim. Acta, 1994, 114-115, p 335-34210.1007/BF01244560 ↗
7. J. Wigren, J.F. de Vries, and D. Greving, Effects of Powder Morphology, Microstructure and Residual Stresses on Thermal Barrier Coating Thermal Shock Performance, Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, Ed., ASM International, Materials Park, OH, USA, 1996, p 855-86110.31399/asm.cp.itsc1996p0855 ↗
8. A. Denoirjean, A. Vardelle, A. Grimaud, P. Fauchais, E. Lugsheider, I. Rass, H.L. Heijen, P. Chandler, R. McIntyre, and T. Cosak, Comparison of the Properties of Plasma Sprayed Stabilized Zirconia Coatings for Different Powder Morphologies, Thermal Spray: International Advances in Coating Technology, C.C. Berndt, Ed., ASM International, Materials Park, OH, USA, 1992, p 975-982
9. M.E. Vinayo, F. Kassabji, J. Guyonnet, and P. Fauchais, Plasma Sprayed WC-Co Coatings Influence of the Spray Conditions, J. Vac. Sci.Technol., 1985, 3(6), p 2483-248910.1116/1.572863 ↗
10. P. Diez and R.W. Smith, The Influence of Powder Agglomeration Methods on Plasma Sprayed Yttria Coatings, J. Therm. Spray Technol., 1993, 2(2), p 165-17210.1007/BF02652025 ↗
11. M. Wang and L.L. Shaw, Effects of the Powder Manufacturing Method on Microstructure and Wear Performance of Plasma Sprayed Alumina-Titania Coatings, Surf. Coat. Technol., 2007, 202, p 34-4410.1016/j.surfcoat.2007.04.057 ↗
12. J. Beczkowiak and J. G. Schwier, Tailoring Carbides and Oxides for HVOF, Thermal Spray: Coatings Properties, Processes and Applications, C.C. Berndt and T.F. Bernecki, Ed., ASM International, Materials Park, OH, USA, 1991, p 121-126
13. P. Vuoristo, T. Mantyla, L.M. Berger, and M. Nebelung, Sprayability and Properties of TiC-Ni Based Powders in the Detonation Gun and HVOF Processes, Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, Ed., ASM International, Materials Park, OH, USA, 1997, p 909-91510.31399/asm.cp.itsc1997p0909 ↗
14. W.J. Jarosinski, M.F. Gruninger, and C.H. Londry, Characterization of Tungsten Carbide Cobalt Powders and HVOF Coatings, Thermal Spray Coatings: Research, Design and Applications, C.C. Berndt and T.F. Bernecki, Ed., ASM International, Materials Park, OH, USA, 1993, p 153-157
15. M.C. Kim, S.B. Kim, and J.W. Hong, Effect of Powder Types on Mechanical Properties of D-Gun Coatings, Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, Ed., ASM International, Materials Park, OH, USA, 1997, p 791-79510.31399/asm.cp.itsc1997p0791 ↗
16. H.L. de Villiers Lovelock, Powder/Processing-Structure Relationships in WC-Co Thermal Spray Coatings: A Review of the Published Literature, J. Therm. Spray Technol., 1998, 7(3), p 357-37310.1361/105996398770350846 ↗
17. P. Suresh Babu, D.S. Rao, G.V.N. Rao, and G. Sundararajan, Effect of Feedstock Size and Its Distribution on the Properties of Detonation Sprayed Coatings, J. Therm. Spray Technol., 2007, 16(2), p 281-29010.1007/s11666-007-9032-9 ↗
18. M. Yandouzi, L. Ajdelsztajn, and B. Jodoin, WC-Based Composite Coatings Prepared by the Pulsed Gas Dynamic Spraying Process: Effect of the Feedstock Powders, Surf. Coat. Technol., 2008, 202, p 3866-387710.1016/j.surfcoat.2008.01.036 ↗
19. I.E. Anderson, D.J. Sordelet, M.F. Besser, and R.L. Terpstra, Effects of Powder Morphology on Pneumatic Feeding and Plasma Spray Deposition, Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, Ed., ASM International, Materials Park, OH, USA, 1998, p 911-91610.31399/asm.cp.itsc1998p0911 ↗
20. X. Fan, F. Gitzhofer, and M.I. Boulos, Statistical Design of Experiments for the Spheroidization of Powdered Alumina by Induction Plasma Processing, J. Therm. Spray Technol., 1998, 7(2), p 247-25310.1361/105996398770350990 ↗
21. M. Vardelle, A. Vardelle, and P. Fauchais, Spray Parameters and Particle Behavior Relationships During Plasma Spraying, J. Therm. Spray Technol., 1993, 2(1), p 79-9210.1007/BF02647426 ↗
22. P. Boch, P. Fauchais, D. Lombard, B. Rogeaux, and M. Vardelle, Plasma Sprayed Zirconia Coatings, Ad. Ceram., 1985, 12, p 488-503
23. D.J. Sordelet, M.F. Besser, M.J. Kramer, S. DePalo, and S. Sampath, Thermal Spray Quasicrystalline Coatings. Part 1: Relationships Among Processing Phase Structure and Splat Morphology, Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, Ed., ASM International, Materials Park, OH, USA, 1998, p 467-47210.31399/asm.cp.itsc1998p0467 ↗
24. D. Sordelet and M. Besser, Effect of Starting Powder Particle Size and Composition on Chemistry and Structure of Al-Cu-Fe Quasicrystalline Plasma Sprayed Coatings, in Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, Ed., ASM International, Materials Park, OH, USA, 1996, p 419-42810.31399/asm.cp.itsc1996p0419 ↗
25. Y. Wang, R.S. Lima, C. Moreau, E. Garcia, J. Guimaraes, P. Miranzo, and M.I. Osendi, Mullite Coatings Produced by APS and SPS: Effect of Powder Morphology and Spray Processing on the Microstructure, Crystallinity and Mechanical Properties, Thermal Spray 2009: Expanding thermal spray performance to new markets and applications, B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, and G. Montavon, Ed., ASM International, Materials Park, OH, USA, 2009, p 97-10210.31399/asm.cp.itsc2009p0097 ↗
26. P. Pei, J. Kelly, S. Malghan, and S. Dapkunas, Analysis of Zirconia Powder for Thermal Spray, Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, Ed., ASM International, Materials Park, OH, USA, 1996, p 263-7310.31399/asm.cp.itsc1996p0263 ↗
27. J.J. Dunkley, Atomization, Powder Metal Technologies and Applications, ASM Handbook, ASM International, Materials Park, OH, USA, 1998, p 35-52
28. A.V. Sergueeva, D.J. Branagan, and A.K. Mukherjee, Microstructure/Properties Relationship in Fe-Based Nanomaterials, Mater. Sci. Eng. A, 2008, 493, p 237-24010.1016/j.msea.2007.08.090 ↗
29. D.J. Branagan, W.D. Swank, D.C. Haggard, and J.R. Fincke, Wear-Resistant Amorphous and Nanocomposite Steel Coatings, Met. Mater. Trans. A, 2001, 32A, p 2615-262110.1007/s11661-001-0051-8 ↗
30. D.J. Branagan, M.C. Marshall, B.E. Meacham, L.F. Aprigliano, R. Bayles, E.J. Lemieux, T. Newbauer, F.J. Martin, J.C. Farmer, J.J. Haslam, and S.D. Day, Wear and Corrosion Resistant Amorphous/Nanostructured Steel Coatings for Replacement of Electrolytic Hard Chromium, Building on 100 Years of Success: Proceedings of the 2006 International Thermal Spray Conference, B.R. Marple, M.M. Hyland, Y.C. Lau, R.S. Lima, and J. Voyer, Ed., ASM International, Materials Park, OH, USA, 2006, e-proceedings10.2172/884957 ↗
31. A.H. Dent, A.J. Horlock, D.G. McCartney, and S.J. Harris, The Corrosion Behavior and Microstructure of High-Velocity Oxy-Fuel Sprayed Nickel-Base Amorphous/Nano-Crystalline Coatings, J. Therm. Spray Technol., 1999, 8(3), p 399-40410.1361/105996399770350340 ↗
32. H.M. Lee, C.Y. Huang, and C.J. Wang, Forming and Sintering Behaviors of Commercial α-Al2O3 Powders with Different Particle Size Distribution and Agglomeration, J. Mater. Proc. Technol., 2009, 209, p 714-72210.1016/j.jmatprotec.2008.02.047 ↗
33. Powders, Fibers, Platelets, and Composites, Ceramic Materials, Chemistry and Materials Science Collection, Springer, New York, NY, USA, 2007
34. C. Han, H. Choi, C. Lee, H. Kim, and S. Hwang, Evaluation of Solid Lubricant Coatings for Low Friction and Wear Resistance Using the Atmospheric Plasma Spray, Mater. Sci. Forum, 2004, 449, p 777-78010.4028/www.scientific.net/MSF.449-452.777 ↗
35. X.-F. Zhang, X.-L. Zhang, A.-H. Wang, and Z.-W. Huang, Microstructure and Properties of HVOF Sprayed Ni-Based Submicron WS2/CaF2 Self-Lubricating Composite Coating, Trans. Nonferrous Met. Soc. China, 2009, 19, p 85-9210.1016/S1003-6326(08)60233-2 ↗
36. C. Tekmen, I. Ozdemir, G. Fritsche, and Y. Tsunekawa, Structural Evolution of Mechanically Alloyed Al-12Si/TiB2/h-BN Composite Powder Coating by Atmospheric Plasma Spraying, Surf. Coat. Technol., 2009, 203, p 2046-205110.1016/j.surfcoat.2009.02.004 ↗
37. M.A. Camerucci and A.L. Cavalieri, Process Parameters in Attrition Milling of Cordierite Powders, J Mater. Synth. Proc., 1998, 6(2), p 115-12110.1023/A:1022695403059 ↗
38. E.J. Lavernia, B.Q. Han, and J.M. Schoenung, Cryomilled Nanostructured Materials: Processing and Properties, Mater. Sci. Eng. A, 2008, 493, p 207-21410.1016/j.msea.2007.06.099 ↗
39. A.L. Borisova and Yu.S. Borisov, Self-Propagating High-Temperature Synthesis for the Deposition of Thermal-Sprayed Coatings, Powder Met. Met. Ceram, 2008, 47(1-2), p 80-9410.1007/s11106-008-0012-5 ↗
40. C. Suryanarayana, Mechanical Alloying and Milling, Prog. Mater. Sci., 2001, 46, p 1-18410.1016/S0079-6425(99)00010-9 ↗
41. L. Ajdelsztajn, B. Jodoin, G.E. Kim, and J.M. Schoenung, Cold Spray Deposition of Nano-Crystalline Aluminum Alloys, Metal. Mater. Trans. A, 2005, 36A, p 657-66610.1007/s11661-005-0182-4 ↗
42. J.A. Picasa, A. Forna, L. Ajdelsztajnb, and J. Schoenung, Nano-Crystalline NiCrAlY Powder Synthesis by Mechanical Cryomilling, Powder Technol., 2004, 148, p 20-2310.1016/j.powtec.2004.09.015 ↗
43. J. He and J.M. Schoenung, Nanostructured Coatings: A Review, Mater. Sci. Eng. A, 2002, 336, p 274-31910.1016/S0921-5093(01)01986-4 ↗
44. K.H. Chung, J. He, D.H. Shin, and J.M. Schoenung, Mechanisms of Microstructure Evolution During Cryomilling in the Presence of Hard Particles, Mater. Sci. Eng. A, 2003, 356, p 23-3110.1016/S0921-5093(02)00833-X ↗
45. N. Eigen, T. Klassen, E. Aust, R. Bormann, and F. Gärtner, Production of Nano-Crystalline Cermet Thermal Spray Powders for Wear Resistant Coatings by High-Energy Milling, Mater. Sci. Eng. A, 2003, 356, p 114-12110.1016/S0921-5093(03)00110-2 ↗
46. J. Oberste Berghaus, J.-G. Legoux, C. Moreau, F. Tarasi, and T. Chraska, Mechanical and Thermal Transport Properties of Suspension Thermal-Sprayed Alumina-Zirconia Composite Coatings, J. Therm. Spray Technol., 2008, 17(1), p 91-10410.1007/s11666-007-9146-0 ↗
47. N. Eigen, F. Gärtner, T. Klassen, E. Aust, R. Bormann, and H. Kreye, Microstructures and Properties of Nanostructured Thermal Sprayed Coatings Using High-Energy Milled Cermet Powders, Surf. Coat. Technol., 2005, 195, p 344-35710.1016/j.surfcoat.2004.06.016 ↗
48. D.E. Walton and C.J. Mumford, Spray Dried Products-Characterization of Particle Morphology, Trans. Inst. Chem. Eng., 1999, 77, p 21-3810.1205/026387699525846 ↗
49. G. Bertrand, P. Roy, C. Filiatre, and C. Coddet, Spray-Dried Ceramic Powders: A Quantitative Correlation Between Slurry Characteristics and Shapes of the Granules, Chem. Eng. Sci., 2005, 60, p 95-10210.1016/j.ces.2004.04.042 ↗
50. R.S. Lima and B.R. Marple, Thermal Spray Coatings Engineered From Nanostructured Ceramic Agglomerated Powders for Structural, Thermal Barrier and Biomedical Applications: A Review, J. Therm. Spray Technol., 2007, 16(1), p 40-6310.1007/s11666-006-9010-7 ↗
51. R.S. Lima and B.R. Marple, Superior Performance of High-Velocity Oxy-Fuel-Sprayed Nanostructured TiO2 in Comparison to Air Plasma-Sprayed Conventional Al2O3-13TiO2, J. Therm. Spray Technol., 2005, 14(3), p 397-40410.1361/105996305X59413 ↗
52. R.S. Lima, B.R. Marple, A. Dadouche, W. Dmochowski, and B. Liko, Nanostructured Abradable Coatings for High Temperature Applications, Building on 100 Years of Success: Proceedings of the International Thermal Spray Conference 2006, B.R. Marple, M.M. Hyland, Y.-C. Lau, R.S. Lima, and J. Voyer, Ed., ASM International, Materials Park, OH, USA, 2006, e-proceedings10.31399/asm.cp.itsc2006p0775 ↗
53. S.R. Baksh, V. Singh, K. Balani, D.G. McCartney, S. Seal, and A. Agarwal, Carbon Nanotube Reinforced Aluminum Composite Coating Via Cold Spraying, Surf. Coat. Technol., 2008, 202, p 5162-516910.1016/j.surfcoat.2008.05.042 ↗
54. E. Lugscheider, M. Loch, and H. Eschnauer, Coated powders—The Status Today, 2nd Plasma-Technik Symposium, P. Huber and H. Echnauer, Ed., Plasma Technik, Wholen, Ch. 2, 1991, p 339-351
55. H. Ito, M. Umakoshi, R. Nakamura, T. Yokoyama, K. Urayama, and M. Kato, Characterization of Ni-Al Composite Powders Formed by Mechanofusion, Thermal Spray Coatings: Properties, Processes and Applications, T.F. Bernecki, Ed., ASM International, Materials Park, OH, USA, 1991, p 405-411
56. H. Ageorges and P. Fauchais, Plasma Spraying of Stainless-Steel Particles Coated with an Alumina Shell, Thin Sol. Films, 2000, 370, p 213-22210.1016/S0040-6090(00)00949-4 ↗
57. A.J. Sherman and P.G. Engleman, Metal Clad Cermet Powders: Processing and Properties, Thermal Spray 2009: Expanding Thermal Spray Performance to New Markets and Applications, Vol. 8, B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, and G. Montavon, Ed., ASM International, Materials Park, OH, USA, 2009, p 36-84010.31399/asm.cp.itsc2009p0836 ↗
58. F. Ben-Ettouil, O. Mazhorova, B. Pateyron, H. Ageorges, M. El-Ganaoui, and P. Fauchais, Predicting Dynamic and Thermal Histories of Agglomerated Particles Injected Within a d.c. Plasma Jet, Surf. Coat. Technol., 2008, 202, p 4491-449510.1016/j.surfcoat.2008.04.032 ↗
59. B. Dzur, Plasma Puts Heat Into Spherical Powder Production, Met. Powder Rep., 2008, 2(63), p 12-1510.1016/S0026-0657(08)70019-5 ↗
60. http://www.tekna.com
61. M. Boulos, M. Ducos, and P. Fauchais, Plasma Technology and Its Potential for Powder Treatment, Matériaux 2006, 13-17 November 2006, Dijon, France, SF2M, Paris, France, 2006 (in French)
62. M. Boulos, P. Fauchais, A. Vardelle, and E. Pfender, Injection of Hot Particles in a Plasma Flame, Plasma Spraying Theory and Applications, R. Suryanarayanun, Ed., World Scientific, Singapore, 1993, p 3-6110.1142/9789814354479_0001 ↗
63. N.M. Dignard and M.I. Boulos, Ceramic and Metallic Powder Spheroidization Using Induction Plasma Technology, Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, Ed., ASM International, Materials Park, OH, USA, 1997, p 1-710.31399/asm.cp.itsc1997p0419 ↗
64. J.L. Xu, K.A. Khor, and R. Kumar, Spheroidization of Bioceramic Powders in a Radio Frequency Plasma, Thermal Spray 2007: Global Coating Solutions, B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, and G. Montavon, Ed., ASM International, Materials Park, OH, USA, 2007, p 890-89310.31399/asm.cp.itsc2007p0890 ↗
65. E. Bouyer, F. Gitzhofer, and M. Boulos, Suspension Plasma Spraying for Hydroxyapatite Powder Preparation by RF Plasma, IEEE Trans. Plasma Sci., 1997, 25(5), p 1066-107210.1109/27.649627 ↗
66. G. Schiller, M. Müller, and F. Gitzhofer, Preparation of Perovskite Powders and Coatings by Radio Frequency Suspension Plasma Spraying, J. Therm. Spray Technol., 1999, 8(3), p 389-39210.1361/105996399770350322 ↗
67. D. Bouchard, L. Sun, F. Gitzhofer, and G.M. Brisard, Synthesis and Characterization of La0.8Sr0.2MO3−δ (M = Mn, Fe, or Co) Cathode Materials by Induction Plasma Technology, J. Therm. Spray Technol., 2006, 15(1), p 37-4510.1361/105996306X92578 ↗
68. P. Fauchais, Understanding Plasma Spraying: An Invited Review, J. Phys. D Appl. Phys., 2004, 37, p 2232-224610.1088/0022-3727/37/9/R02 ↗
69. P. Fauchais, M. Fukumoto, A. Vardelle, and M. Vardelle, Knowledge Concerning Splat Formation: An Invited Review, J. Therm. Spray Technol., 2004, 13(3), p 337-36010.1361/10599630419670 ↗
70. F. Gärtner, T. Stoltenhoff, T. Schmidt, and H. Kreye, The Cold Spray Process and Its Potential for Industrial Applications, J. Therm. Spray Technol., 2006, 15(2), p 223-23210.1361/105996306X108110 ↗
71. T. Schmidt, F. Gärtner, H. Assadi, and H. Kreye, Development of a Generalized Parameter Window for Cold Spray Deposition, Acta Mater., 2006, 54, p 729-74210.1016/j.actamat.2005.10.005 ↗
72. M. Vardelle, A. Vardelle, P. Fauchais, K.-I. Li, B. Dussoubs, and N.J. Themelis, Controlling Particle Injection in Plasma Spraying, J. Therm. Spray Technol., 2001, 10(2), p 267-28410.1361/105996301770349367 ↗
73. T. Han, Z. Zhao, B.A. Gillispie, and J.R. Smith, A Fundamental Study of the Kinetic Spray Process, Thermal Spray Solutions—Advances in Technology and Application, DVS, Düsseldorf, Germany, 2004, e-proceedings10.31399/asm.cp.itsc2004p0363 ↗
74. V. Srinivasan, M. Friis, A. Vaidya, T. Streibl, and S. Sampath, Particle Injection in Direct Current Air Plasma Spray: Salient Observations and Optimization Strategies, Plasma Chem. Plasma Proc., 2007, 27(5), p 609-62310.1007/s11090-007-9089-8 ↗
75. V. Srinivasan, A. Vaidya, T. Streibl, M. Friis, and S. Sampath, On the Reproducibility of Air Plasma Spray Process and Control of Particle State, J. Therm. Spray Technol., 2006, 15(4), p 739-74310.1361/105996306X147199 ↗
76. P. Fauchais, J.-F. Coudert, and M. Vardelle, Diagnostics of Plasma Spray Process and Derived On-Line Control, High Temp. Mater. Proc., 2002, 6(2), p 247-265
77. H. Fukanama, N. Ohno, B. Sun, and R. Huang, The Influence of Particle Morphology on In-Flight Particle Velocity in Cold Spray, Building on 100 Years of Success: Proceedings of the International Thermal Spray Conference 2006, B.R. Marple, M.M. Hyland, Y.-C. Lau, R.S. Lima, and J. Voyer, Ed., ASM International, Materials Park, OH, USA, 2006, e-proceedings10.31399/asm.cp.itsc2006p0097 ↗
78. S. Gu and S. Kamnis, Numerical Modeling of In-flight Particle Dynamics of Non-Spherical Powder, Surf. Coat. Technol., 2009, 203, p 3485-349010.1016/j.surfcoat.2009.05.024 ↗
79. P. Fauchais, R. Etchart-Salas, V. Rat, J.-F. Coudert, N. Caron, and K. Wittmann-Ténèze, Parameters Controlling Liquid Plasma Spraying: Solutions, Sols or Suspensions, J. Therm. Spray Technol., 2008, 17(1), p 31-5910.1007/s11666-007-9152-2 ↗
80. D.G.C. Robertson and A.E. Jenkins, The Reaction of Liquid Iron and Its Alloys in Pure Oxygen, Heterogeneous Kinetics at Elevated Temperatures, G.R. Belton and W.L. Workel, Ed., Plenum Press, New York, NY, USA, 1970, p 369-38510.1007/978-1-4684-8065-8_15 ↗
81. R.A. Neiser, M.F. Smith, and R.C. Dykhuisen, Oxidation in Wire HVOF-Sprayed Steel, J. Therm. Spray Technol., 1998, 7(4), p 537-54510.1361/105996398770350765 ↗
82. S. Dallaire, Thermal Spraying of Reactive Materials to Form Wear-Resistant Composite Coatings, J. Therm. Spray Technol., 1992, 1(1), p 41-4710.1007/BF02657016 ↗
83. M. Vardelle, A. Vardelle, K.-I. Li, P. Fauchais, and N.J. Themelis, Coating Generation: Vaporization of Particles in Plasma Spraying and Splat Formation, Pure Appl. Chem., 1996, 68(5), p 1093-109910.1351/pac199668051093 ↗
84. J. Amouroux, A. Gicquel, S. Cavadias, D. Morvan, and F. Arefi, Progress in the Applications of Plasma Surface Modifications and Correlations with the Chemical Properties of the Plasma Phase, Pure Appl. Chem., 1985, 57(9), p 1207-122210.1351/pac198557091207 ↗
85. G. Espie, A. Denoirjean, P. Fauchais, J.-C. Labbe, J. Dudsky, O. Scheeweiss, and K. Volenik, In-Flight Oxidation of Iron Particles Sprayed Using Gas and Water Stabilized Plasma Torches, Surf. Coat. Technol., 2005, 195, p 17-2810.1016/j.surfcoat.2004.05.030 ↗
86. A.A. Syed, A. Denoirjean, P. Denoirjean, J.-C. Labbe, and P. Fauchais, In-Flight Oxidation of Stainless Steel in Plasma Spraying, J. Therm. Spray Technol., 2005, 14(1), p 177-177
87. L. Jacobs, M.M. Hyland, and M. De Bonte, Comparative Study of WC-Cermet Coatings Sprayed Via the HVOF and the HVAF Process, J. Therm. Spray Technol., 1998, 7(2), p 213-21810.1361/105996398770350954 ↗
88. H.L. de Villiers Lovelock, P.W. Richter, J.M. Benson, and P.M. Young, Parameter Study of HP/HVOF Deposited WC-Co Coatings, J. Therm. Spray Technol., 1998, 7(1), p 97-10710.1007/s11666-006-5010-x ↗
89. S. Luyckx and C.N. Machio, Characterization of WC-VC-Co Thermal Spray Powders and Coatings, Int. J. Refrac. Met. Hard Mater., 2007, 25, p 11-1510.1016/j.ijrmhm.2005.10.009 ↗
90. R.W. Smith and Z.Z. Matasin, Reactive Plasma Spraying of Wear-Resistant Coatings, J. Therm. Spray Technol., 1992, 1(1), p 57-6310.1007/BF02657018 ↗
91. T. Eckardt, W. Malleaer, and D. Stove, Reactive Plasma Spraying of Silicon in Controlled Nitrogen Atmosphere, Thermal Spray: Industrial Applications, C.C. Berndt and S. Sampath, Ed., ASM International, Materials Park, OH, USA, 1994, p 515-520
92. P. Fauchais, A. Vardelle, and A. Denoirjean, Reactive Thermal Plasmas: Ultrafine Particle Synthesis and Coating Deposition, Surf. Coat. Technol., 1997, 979, p 66-7810.1016/S0257-8972(97)00294-6 ↗
93. A. Denoirjean, P. Lefort, and P. Fauchais, Nitridition Process and Mechanism of Ti-6Al-4V Particles by Plasma Spraying, Phys. Chem. Phys., 2003, 5, p 5133-513810.1039/B311186P ↗
94. D. Zou, D. Yan, L. Xiao, and Y. Dong, Characterization of Nanostructured TiN Coatings Fabricated by Reactive Plasma Spraying, Surf. Coat. Technol., 2008, 202, p 1928-193410.1016/j.surfcoat.2007.08.022 ↗
95. A. Kobayashi, Formation of TiN Coatings by Gas Tunnel Type Plasma Reactive Spraying, Surf. Coat. Technol., 2000, 132, p 152-15710.1016/S0257-8972(00)00725-8 ↗
96. M. Inagaki, Y. Yokogawa, and T. Kameyama, Bond Strength Improvement of Hydroxyapatite Titanium Composite Coating by Partial Nitriding During R.F.-Thermal Plasma Spraying, Surf. Coat. Technol., 2003, 173, p 1-810.1016/S0257-8972(03)00513-9 ↗
97. M. Yamada, Y. Kouzaki, T. Yasui, and M. Fukumoto, Fabrication of Iron Nitride Coatings by Reactive R.F. Plasma Spraying, Surf. Coat. Technol., 2006, 201, p 1745-175110.1016/j.surfcoat.2006.02.046 ↗
98. G. Espié, P. Fauchais, B. Hannoyer, J.-C. Labbe, and A. Vardelle, Effect of Metal Particles Oxidation During the APS on the Wettability, Heat and Mass Transfer Under Plasma Condition, P. Fauchais, J. Van der Mullen, and J. Heberlein, Ed., Ann. NY Acad. Sci., 1999, 891, p 143-15110.1111/j.1749-6632.1999.tb08761.x ↗
99. Y. Borisov and A. Borisova, Application of Self-Propagating High-Temperature Synthesis in Thermal Spraying Technology, Thermal Spray: Research, Design and Applications, T.F. Bernicki, Ed., ASM International, Materials Park, OH, USA, 1992, p 139-144
100. S.C. Deevi, V.K. Sikka, C.J. Swindeman, and R.D. Seals, Reactive Spraying of Nickel-Aluminide Coatings, J. Therm. Spray Technol., 1997, 6(3), p 335-34410.1007/s11666-997-0068-7 ↗