journal article·2019-12Open access

Advances in Corrosion-Resistant Thermal Spray Coatings for Renewable Energy Power Plants. Part I: Effect of Composition and Microstructure

Esmaeil Sadeghi, Nicolaie Markocsan, Shrikant Joshi

Abstract

Abstract Power generation from renewable resources has attracted increasing attention in recent years owing to the global implementation of clean energy policies. However, such power plants suffer from severe high-temperature corrosion of critical components such as water walls and superheater tubes. The corrosion is mainly triggered by aggressive gases like HCl, H2O, etc., often in combination with alkali and metal chlorides that are produced during fuel combustion. Employment of a dense defect-free adherent coating through thermal spray techniques is a promising approach to improving the performances of components as well as their lifetimes and, thus, significantly increasing the thermal/electrical efficiency of power plants. Notwithstanding the already widespread deployment of thermal spray coatings, a few intrinsic limitations, including the presence of pores and relatively weak intersplat bonding that lead to increased corrosion susceptibility, have restricted the benefits that can be derived from these coatings. Nonetheless, the field of thermal spraying has been continuously evolving, and concomitant advances have led to progressive improvements in coating quality; hence, a periodic critical assessment of our understanding of the efficacy of coatings in mitigating corrosion damage can be highly educative. The present paper seeks to comprehensively document the current state of the art, elaborating on the recent progress in thermal spray coatings for high-temperature corrosion applications, including the alloying effects, and the role of microstructural characteristics for understanding the behavior of corrosion-resistant coatings. In particular, this review comprises a substantive discussion on high-temperature corrosion mechanisms, novel coating compositions, and a succinct comparison of the corrosion-resistant coatings produced by diverse thermal spray techniques.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. N.L. Panwar, S.C. Kaushik, and S. Kothari, Role of Renewable Energy Sources in Environmental Protection: A Review, Renew. Sustain. Energy Rev., 2011, 15(3), p 1513-152410.1016/j.rser.2010.11.037 ↗
2. G. Boyle, Renewable Energy Power for a Sustainable Future, 2nd ed., Oxford University Press, Oxford, 2004
3. M. Li, N. Luo, and Y. Lu, Biomass Energy Technological Paradigm (BETP): Trends in this Sector, Sustainability, 2017, 9(4), p 56710.3390/su9040567 ↗
4. A. Demirbas, Potential Applications of Renewable Energy Sources, Biomass Combustion Problems in Boiler Power Systems and Combustion Related Environmental Issues, Prog. Energy Combust. Sci., 2005, 31(2), p 171-19210.1016/j.pecs.2005.02.002 ↗
5. A.A. Khan, W. De Jong, P.J. Jansens, and H. Spliethoff, Biomass Combustion in Fluidized Bed Boilers: Potential Problems and Remedies, Fuel Process. Technol., 2009, 90(1), p 21-5010.1016/j.fuproc.2008.07.012 ↗
6. P. McKendry, Energy Production from Biomass (Part 1): Overview of Biomass, Bioresour. Technol. , 2002, 83(1), p 37-4610.1016/S0960-8524(01)00118-3 ↗
7. D.A. Tillman, Biomass Cofiring: The Technology, the Experience, the Combustion Consequences, Biomass Bioenergy, 2000, 19(6), p 365-38410.1016/S0961-9534(00)00049-0 ↗
8. H.P. Nielsen, F.J. Frandsen, K. Dam-Johansen, and L.L. Baxter, Implications of Chlorine-Associated Corrosion on the Operation of Biomass-Fired Boilers, Prog. Energy Combust. Sci., 2000, 26(3), p 283-29810.1016/S0360-1285(00)00003-4 ↗
9. D. Fähsing, M. Rudolphi, L. Konrad, and M.C. Galetz, Fireside Corrosion of Chromium- and Aluminum-Coated Ferritic–Martensitic Steels, Oxid. Metals, 2017, 88(1–2), p 155-16410.1007/s11085-016-9684-2 ↗
10. P. Fauchais, and A. Vardelle, Thermal sprayed coatings used against corrosion and corrosive wear, Adv. Plasma Spray Appl., 2012.10.5772/34448 ↗
11. K. Szymański, A. Hernas, G. Moskal, and H. Myalska, Thermally Sprayed Coatings Resistant to Erosion and Corrosion for Power Plant Boilers: A Review, Surf. Coat. Technol., 2015, 268, p 153-16410.1016/j.surfcoat.2014.10.046 ↗
12. D. Mudgal, S. Singh, and S. Prakash, “Corrosion problems in incinerators and biomass-fuel-fired boilers,” International Journal of Corrosion, 2014, 2014.10.1155/2014/505306 ↗
13. S.A. Galedari, A. Mahdavi, F. Azarmi, Y. Huang, and A. McDonald, A Comprehensive Review of Corrosion Resistance of Thermally-Sprayed and Thermally-Diffused Protective Coatings on Steel Structures, J. Therm. Spray Technol., 2019, 28(4), p 645-67710.1007/s11666-019-00855-3 ↗
14. R. Viswanathan, K. Coleman, and U. Rao, Materials for Ultra-Supercritical Coal-Fired Power Plant Boilers, Int. J. Press. Vessels Pip., 2006, 83(11-12), p 778-78310.1016/j.ijpvp.2006.08.006 ↗
15. S. Saber-Samandari and C.C. Berndt, IFTHSE Global 21: Heat Treatment and Surface Engineering in the Twenty-First Century Part 10 – Thermal Spray Coatings: A Technology Review, Int. Heat Treat. Surf. Eng., 2010, 4(1), p 7-1310.1179/174951410X12572442577381 ↗
16. M. Kaur, H. Singh, and S. Prakash, A Survey of the Literature on the Use of High Velocity Oxy-Fuel Spray Technology for High Temperature Corrosion and Erosion-Corrosion Resistant Coatings, Anti-Corros. Methods Mater., 2008, 55(2), p 86-9610.1108/00035590810859467 ↗
17. H. Singh, T. S. Sidhu, and S. B. S. Kalsi, “Effect of Nano Coatings On Waste to Energy (WTE) Plant: A Review,” i-Manager’s Journal on Electronics Engineering, 20101, 1, p 1
18. Y. Kawahara, Application of High Temperature Corrosion-Resistant Materials and Coatings Under Severe Corrosive Environment in Waste-to-Energy Boilers, J. Therm. Spray Technol., 2007, 16(2), p 202-21310.1007/s11666-006-9012-5 ↗
19. J. Mehta, V.K. Mittal, and P. Gupta, Role of Thermal Spray Coatings on Wear, Erosion and Corrosion Behavior: A Review, J. Appl. Sci. Eng., 2017, 20(4), p 445-452
20. S. Amin, and H. Panchal, A Review on Thermal Spray Coating Processes, Transfer, 2016 2, p 4
21. Y. Kawahara, An overview on corrosion-resistant coating technologies in biomass/waste-to-energy plants in recent decades. Coatings, 2016, 6(3), p 3410.3390/coatings6030034 ↗
22. E. Sadeghi, S. Raman, and S. Joshi, “High Temperature Erosion-Corrosion of HVAF-Sprayed Ni-based Coatings”, in 8th Rencontres Internationales sur la Projection Thermique, Limoges, France, 2017
23. L.L. Baxter et al., The Behavior of Inorganic Material in Biomass-Fired Power Boilers: Field and Laboratory Experiences, Fuel Process. Technol., 1998, 54(1-3), p 47-7810.1016/S0378-3820(97)00060-X ↗
24. A. Singh, V. Sharma, S. Mittal, G. Pandey, D. Mudgal, and P. Gupta, An Overview of Problems and Solutions for Components Subjected to Fireside of Boilers, Int. J. Ind. Chem., 2018, 9(1), p 1-1510.1007/s40090-017-0133-0 ↗
25. P. Henderson, P. Szakálos, R. Pettersson, C. Andersson, and J. Högberg, Reducing Superheater Corrosion in Wood-Fired Boilers, Mater. Corros., 2006, 57(2), p 128-13410.1002/maco.200503899 ↗
26. S. Karlsson, L.-E. Åmand, and J. Liske, Reducing High-Temperature Corrosion on High-Alloyed Stainless Steel Superheaters by co-Combustion of Municipal Sewage Sludge in a Fluidised Bed Boiler, Fuel, 2015, 139, p 482-49310.1016/j.fuel.2014.09.007 ↗
27. J. Koppejan, and S. Van Loo, The Handbook of Biomass Combustion and Co-firing. Routledge, London, 2012.10.4324/9781849773041 ↗
28. M.A. Olivas-Ogaz, J. Eklund, J.-E. Svensson, J. Liske, and T. Jonsson, Microstructural Study of the Influence of KCl and HCl on Preformed Corrosion Product Layers on Stainless Steel, Oxid. Metals, 2017, 87(5-6), p 801-81110.1007/s11085-017-9763-z ↗
29. C. Yin, L.A. Rosendahl, and S.K. Kær, Grate-Firing of Biomass for Heat and Power Production, Prog. Energy Combust. Sci., 2008, 34(6), p 725-75410.1016/j.pecs.2008.05.002 ↗
30. I. Obernberger, T. Brunner, and G. Bärnthaler, Chemical Properties of Solid Biofuels—Significance and Impact, Biomass Bioenerg., 2006, 30(11), p 973-98210.1016/j.biombioe.2006.06.011 ↗
31. A. Miltner, G. Beckmann, and A. Friedl, Preventing the Chlorine-Induced High Temperature Corrosion In Power Boilers Without Loss of Electrical Efficiency In steam Cycles, Appl. Therm. Eng., 2006, 26(16), p 2005-201110.1016/j.applthermaleng.2006.01.006 ↗
32. D. Leclerc, W.L. Duo, and M. Vessey, Effects of Combustion and Operating Conditions on PCDD/PCDF Emissions from Power Boilers Burning Salt-Laden Wood Waste, Chemosphere, 2006, 63(4), p 676-68910.1016/j.chemosphere.2005.07.081 ↗
33. G. Scheffknecht, L. Al-Makhadmeh, U. Schnell, and J. Maier, Oxy-Fuel Coal Combustion: A Review of the Current State-of-the-Art, Int. J. Greenhouse Gas Control, 2011, 5(SUPPL. 1), p S16-S3510.1016/j.ijggc.2011.05.020 ↗
34. A. Zahs, M. Spiegel, and H.J. Grabke, Chloridation and Oxidation of Iron, Chromium, Nickel and Their Alloys in Chloridizing and Oxidizing Atmospheres at 400-700 °C, Corros. Sci., 2000, 42(6), p 1093-112210.1016/S0010-938X(99)00142-0 ↗
35. N. Israelsson et al., A Microstructural and Kinetic Investigation of the KCl-Induced Corrosion of an FeCrAl Alloy at 600 °C, Oxid. Metals, 2015, 84(1-2), p 105-12710.1007/s11085-015-9546-3 ↗
36. Y. Liu, W. Fan, X. Wu, and X. Zhang, Chlorine-Induced High-Temperature Corrosion of Boiler Steels Combusting Sha Erhu Coal Compared to Biomass, Energy Fuels, 2018, 32(4), p 4237-424710.1021/acs.energyfuels.7b03143 ↗
37. J.E. Indacochea, J.L. Smith, K.R. Litko, E.J. Karell, and A.G. Rarez, High-Temperature Oxidation and Corrosion of Structural Materials in Molten Chlorides, Oxid. Metals, 2001, 55(1-2), p 1-1610.1023/A:1010333407304 ↗
38. T. Ishitsuka and K. Nose, Stability of Protective Oxide Films in Waste Incineration Environment—Solubility Measurement of Oxides in Molten Chlorides, Corros. Sci., 2002, 44(2), p 247-26310.1016/S0010-938X(01)00059-2 ↗
39. B. Verbinnen, J. De Greef, and J. Van Caneghem, Theory and Practice of Corrosion Related to Ashes and Deposits in a WtE Boiler, Waste Manag, 2018, 73, p 307-31210.1016/j.wasman.2017.11.031 ↗
40. R. Jafari and E. Sadeghi, “High-temperature corrosion performance of HVAF-sprayed NiCr, NiAl, and NiCrAlY coatings with alkali sulfate/chloride exposed to ambient air,” Corrosion Science, p 108066, 2019.10.1016/j.corsci.2019.06.021 ↗
41. T. Sharobem and M. J. Castaldi, The effect of SO2/HCl ratio on superheater high temperature corrosion, presented at the 20th Annual North American Waste-to-Energy Conference, NAWTEC 2012, 2012, 23-2710.1115/NAWTEC20-7042 ↗
42. Y.S. Li, Y. Niu, and W.T. Wu, Accelerated Corrosion of Pure Fe, Ni, Cr and Several Fe-Based Alloys Induced by ZnCl2-KCl at 450 °C in Oxidizing Environment, Mater. Sci. Eng. A, 2003, 345(1-2), p 64-71
43. C. Proff, T. Jonsson, C. Pettersson, J.-E. Svensson, L.-G. Johansson, and M. Halvarsson, Microstructural Investigation of the KCl-Induced Corrosion of the Austenitic Alloy Sanicro 28 (35Fe27Cr31Ni) at 600 °C, Mater. High Temp., 2009, 26(2), p 113-12510.3184/096034009X464339 ↗
44. D. Fantozzi, V. Matikainen, M. Uusitalo, H. Koivuluoto, and P. Vuoristo, Chlorine-Induced High Temperature Corrosion of Inconel 625 Sprayed Coatings Deposited with Different Thermal Spray Techniques, Surf. Coat. Technol., 2017, 318, p 233-24310.1016/j.surfcoat.2016.12.086 ↗
45. J. Zhou, J.K. Walleser, B.E. Meacham, and D.J. Branagan, Novel in Situ Transformable Coating for Elevated-Temperature Applications, J. Therm. Spray Technol., 2010, 19(5), p 950-95710.1007/s11666-010-9498-8 ↗
46. M. Oksa, S. Tuurna, and T. Varis, Increased Lifetime for Biomass and Waste to Energy Power Plant Boilers with HVOF Coatings: High Temperature Corrosion Testing Under Chlorine-Containing Molten Salt, J .Therm Spray Technol., 2013, 22(5), p 783-79610.1007/s11666-013-9928-5 ↗
47. M. Oksa, P. Auerkari, J. Salonen, and T. Varis, Nickel-Based HVOF Coatings Promoting High Temperature Corrosion Resistance of Biomass-Fired Power Plant Boilers, Fuel Process. Technol., 2014, 125, p 236-24510.1016/j.fuproc.2014.04.006 ↗
48. L. Reddy, P. Shipway, C. Davis, and T. Hussain, HVOF and Laser-Cladded Fe-Cr-B Coating in Simulated Biomass Combustion: Microstructure and Fireside Corrosion, Oxid. Metals, 2017, 87(5-6), p 825-83510.1007/s11085-017-9774-9 ↗
49. H.J. Grabke, E. Reese, and M. Spiegel, The Effects Of Chlorides, Hydrogen Chloride, And Sulfur Dioxide in the Oxidation of Steels Below Deposits, Corros. Sci., 1995, 37(7), p 1023-104310.1016/0010-938X(95)00011-8 ↗
50. K. Salmenoja, Black-Liquor Gasification: Theoretical and Experimental Studies, Bioresour. Technol., 1993, 46(1), p 167-17110.1016/0960-8524(93)90069-N ↗
51. J. Sandberg, C. Karlsson, and R.B. Fdhila, A 7 year Long Measurement Period Investigating the Correlation of Corrosion, Deposit and Fuel in a Biomass Fired Circulated Fluidized Bed Boiler, Appl. Energy, 2011, 88(1), p 99-11010.1016/j.apenergy.2010.07.025 ↗
52. S. Poskrobko, J. Łach, and D. Król, Experimental Investigation of Hydrogen Chloride Bonding with Calcium Hydroxide in the Furnace of a Stoker-Fired Boiler, Energy Fuels, 2010, 24(3), p 1948-195710.1021/ef901534d ↗
53. A. Fry, B. Adams, K. Davis, D. Swensen, S. Munson, and W. Cox, An Investigation into the Likely Impact of Oxy-Coal Retrofit on Fire-Side Corrosion Behavior in Utility Boilers, Int. J. Greenhouse Gas Control, 2011, 5, p S179-S18510.1016/j.ijggc.2011.05.021 ↗
54. R.A. Khalil et al., Experimental Investigation on Corrosion Abatement in Straw Combustion by Fuel Mixing, Energy Fuels, 2011, 25(6), p 2687-269510.1021/ef200232r ↗
55. S.C. Okoro, M. Montgomery, F.J. Frandsen, and K. Pantleon, Time and Temperature Effects on Alkali Chloride Induced High Temperature Corrosion of Superheaters during Biomass Firing, Energy Fuels, 2018, 32(7), p 7991-799910.1021/acs.energyfuels.8b01232 ↗
56. S. Karlsson, T. Jonsson, J. Hall, J.-E. Svensson, and J. Liske, Mitigation of Fireside Corrosion of Stainless Steel in Power Plants: A Laboratory Study of the Influences of SO2 and KCl on Initial Stages of Corrosion, Energy Fuels, 2014, 28(5), p 3102-310910.1021/ef402127h ↗
57. S.C. van Lith, F.J. Frandsen, M. Montgomery, T. Vilhelmsen, and S.A. Jensen, Lab-scale Investigation of Deposit-induced Chlorine Corrosion of Superheater Materials under Simulated Biomass-Firing Conditions. Part 1: Exposure at 560 °C, Energy Fuels, 2009, 23(7), p 3457-346810.1021/ef9000924 ↗
58. S. Andersson et al., Sulfur Recirculation for Increased Electricity Production in Waste-to-Energy Plants, Waste Manag, 2014, 34(1), p 67-7810.1016/j.wasman.2013.09.002 ↗
59. Y. Kawahara, High Temperature Corrosion Mechanisms and Effect Of Alloying Elements for Materials Used in Waste Incineration Environment, Corros. Sci., 2002, 44(2), p 223-24510.1016/S0010-938X(01)00058-0 ↗
60. M. Fukuda, “22 - Advanced USC technology development in Japan,” in Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants, A. Di Gianfrancesco, Ed. Woodhead Publishing, 2017, 733-754.10.1016/B978-0-08-100552-1.00022-1 ↗
61. K. Kurokawa, T. Sudiro, T. Sano, S. Kyo, O. Ishibashi, and M. Nakamori, High-Temperature Corrosion Resistance of SiO2-Forming Materials, Corros. Rev., 2018, 36(1), p 65-7410.1515/corrrev-2017-0069 ↗
62. P.S. Sidky and M.G. Hocking, Review of Inorganic Coatings and Coating Processes for Reducing Wear and Corrosion, Br. Corros. J., 1999, 34(3), p 171-18310.1179/000705999101500815 ↗
63. A. Hjörnhede, Erosion - Corrosion Resistance and Adhesion of Laser and Thermally Deposited Coatings in Fluidised Beds, 2004
64. B. Song, K.T. Voisey, and T. Hussain, High Temperature Chlorine-Induced Corrosion of Ni50Cr Coating: HVOLF, HVOGF, Cold Spray and Laser Cladding, Surf. Coat. Technol., 2018, 337, p 357-36910.1016/j.surfcoat.2018.01.025 ↗
65. B. Backer, S. Kizer, and R. Zhang, “Recent experience with materials utilized to resist coal ash corrosion”, presented at the CORROSION/2011, NACE, Houston, TX, USA, 2011
66. S.S. Sandhu and A.S. Shahi, Metallurgical, Wear and Fatigue Performance of Inconel 625 Weld Claddings, J. Mater. Process. Technol., 2016, 233, p 1-810.1016/j.jmatprotec.2016.02.010 ↗
67. J. R. Davis, Handbook of Thermal Spray Technology. ASM International, 2004.
68. F. B. Quinlan and L. P. Grobel, “Treatment of metals,” US2303869A, 01-Dec-1942.
69. P. Fauchais, G. Montavon, and G. Bertrand, From Powders to Thermally Sprayed Coatings, J. Therm. Spray Technol., 2010, 19(1-2), p 56-8010.1007/s11666-009-9435-x ↗
70. J.A. Browning, Hypervelocity Impact Fusion—A Technical Note, JTST, 1992, 1(4), p 289-29210.1007/BF02647155 ↗
71. J. Kiilakoski, J. Puranen, E. Heinonen, H. Koivuluoto, and P. Vuoristo, Characterization of Powder-Precursor HVOF-Sprayed Al2O3-YSZ/ZrO2 Coatings, J. Therm. Spray Technol., 2019, 28(1), p 98-10710.1007/s11666-018-0816-x ↗
72. S.V. Joshi, G. Sivakumar, T. Raghuveer, and R.O. Dusane, Hybrid Plasma-Sprayed Thermal Barrier Coatings Using Powder and Solution Precursor Feedstock, J. Therm. Spray Technol., 2014, 23(4), p 616-62410.1007/s11666-014-0075-4 ↗
73. J.W. Murray, A. Leva, S. Joshi, and T. Hussain, Microstructure and Wear Behaviour of Powder and Suspension Hybrid Al2O3-YSZ Coatings, Ceram. Int., 2018, 44(7), p 8498-850410.1016/j.ceramint.2018.02.048 ↗
74. S. Björklund, S. Goel, and S. Joshi, Function-Dependent Coating Architectures by Hybrid Powder-Suspension Plasma Spraying: Injector Design, Processing and Concept Validation, Mater. Des., 2018, 142, p 56-6510.1016/j.matdes.2018.01.002 ↗
75. B. Song, Z. Pala, K.T. Voisey, and T. Hussain, Gas and Liquid-Fuelled HVOF Spraying of Ni50Cr Coating: Microstructure and High Temperature Oxidation, Surf. Coat. Technol., 2017, 318, p 224-23210.1016/j.surfcoat.2016.07.046 ↗
76. M. Oksa, “Nickel- and iron-based HVOF thermal spray coatings for high temperature corrosion protection in biomass-fired power plant boilers: Dissertation,” 2015.10.1007/s11666-014-0155-5 ↗
77. M. Oksa, E. Turunen, T. Suhonen, T. Varis, and S.-P. Hannula, Optimization and Characterization of High Velocity Oxy-fuel Sprayed Coatings: Techniques, Materials, and Applications, Coatings, 2011, 1(1), p 17-5210.3390/coatings1010017 ↗
78. N. Rana, M.M. Mahapatra, R. Jayaganthan, and S. Prakash, High-Temperature Oxidation and Hot Corrosion Studies on NiCrAlY Coatings Deposited by Flame-Spray Technique, J. Therm. Spray Technol., 2015, 24(5), p 769-77710.1007/s11666-015-0237-z ↗
79. Y. Korobov, S. Nevezhin, and M. Filippov, “Study of high velocity arc sprayed heat resistant coatings from FeCrAlBY cored wire. Thermal spray. Fostering a sustainable world for a better life,” in of the Int. Thermal Spray Conf. and Exposition ITSC 2016 (10-13 May, 2016, Shanghai, China), 2016, 852-856.10.31399/asm.cp.itsc2016p0852 ↗
80. P. Fauchais, Understanding Plasma Spraying, J. Phys. D Appl. Phys., 2004, 37(9), p R8610.1088/0022-3727/37/9/R02 ↗
81. C. Moreau, P. Gougeon, M. Lamontagne, V. Lacasse, G. Vaudreuil, P. Cielo, “On-Line Control of the Plasma Spraying Process by Monitoring the Temperature, Velocity, and Trajectory of in-Flight Particles,” (1994).
82. Y. Wang et al., A Transmission Electron Microscopy Study of the Microstructure and Interface of Zirconia-Based Thermal Barrier Coatings, J. Alloys Compd., 2015, 619, p 820-82510.1016/j.jallcom.2014.09.058 ↗
83. R. Ghasemi, R. Shoja-Razavi, R. Mozafarinia, and H. Jamali, Comparison of Microstructure and Mechanical Properties of Plasma-Sprayed Nanostructured and Conventional Yttria Stabilized Zirconia Thermal Barrier Coatings, Ceram. Int., 2013, 39, p 8805-881310.1016/j.ceramint.2013.04.068 ↗
84. T. Hussain, T. Dudziak, N.J. Simms, and J.R. Nicholls, Fireside Corrosion Behavior of HVOF and Plasma-Sprayed Coatings in Advanced Coal/Biomass Co-fired Power Plants, J. Therm. Spray Technol., 2013, 22(5), p 797-80710.1007/s11666-013-9887-x ↗
85. H. Singh, D. Puri, and S. Prakash, High Temperature Oxidation Behaviour of Plasma Sprayed NiCrAlY Coatings on Ni-Based Superalloys in Air, Trans. Indian Inst. Metals, 2005, 59, p 215-227
86. T.C. Hanson, C.M. Hackett, and G.S. Settles, Independent Control of HVOF Particle Velocity and Temperature, J. Therm. Spray Technol., 2002, 11(1), p 75-8510.1361/105996302770349005 ↗
87. S. Shrestha and A.J. Sturgeon, Use of Advanced Thermal Spray Processes for Corrosion Protection in Marine Environments, Surf. Eng., 2004, 20(4), p 237-24310.1179/026708404225016337 ↗
88. R. Molins, B. Normand, G. Rannou, B. Hannoyer, and H. Liao, Interlamellar Boundary Characterization in Ni-Based Alloy Thermally Sprayed Coating, Mater. Sci. Eng., A, 2003, 351(1), p 325-33310.1016/S0921-5093(02)00839-0 ↗
89. D. Shi, M. Li, and P.D. Christofides, Diamond Jet Hybrid HVOF Thermal Spray: Rule-Based Modeling of Coating Microstructure, Ind. Eng. Chem. Res., 2004, 43(14), p 3653-366510.1021/ie030560h ↗
90. D. Zhang, S.J. Harris, and D.G. McCartney, Microstructure Formation and Corrosion Behaviour in HVOF-Sprayed Inconel 625 Coatings, Mater. Sci. Eng., A, 2003, 344(1-2), p 45-5610.1016/S0921-5093(02)00420-3 ↗
91. M. Bai, L. Reddy, and T. Hussain, Experimental and Thermodynamic Investigations on the Chlorine-Induced Corrosion of HVOF Thermal Sprayed NiAl Coatings and 304 Stainless Steels at 700 °C, Corros. Sci., 2018, 135, p 147-15710.1016/j.corsci.2018.02.047 ↗
92. S. Hong, Y. Wu, G. Li, B. Wang, W. Gao, and G. Ying, Microstructural Characteristics of High-Velocity Oxygen-Fuel (HVOF) Sprayed Nickel-Based Alloy Coating, J. Alloys Compd., 2013, 581, p 398-40310.1016/j.jallcom.2013.07.109 ↗
93. X.Q. Ma, D.W. Gandy, and G.J. Frederick, Innovation of Ultrafine Structured Alloy Coatings Having Superior Mechanical Properties and High Temperature Corrosion Resistance, J. Therm. Spray Technol., 2008, 17(5-6), p 933-941
94. P. Cavaliere, Cold-Spray Coatings: Recent Trends and Future perspectives, Springer, Berlin, 201810.1007/978-3-319-67183-3 ↗
95. N. Bala, H. Singh, J. Karthikeyan, and S. Prakash, Cold Spray Coating Process for Corrosion Protection: A Review, Surf. Eng., 2014, 30(6), p 414-42110.1179/1743294413Y.0000000148 ↗
96. A. Verstak and V. Baranovski, Activated Combustion HVAF Coatings for Protection Against Wear and High Temperature Corrosion, Presented at the International Thermal Spray Conference and Exposition, ITSC 2003, Orlando, Florida, 200310.31399/asm.cp.itsc2003p0535 ↗
97. C. Lyphout and S. Björklund, Internal Diameter HVAF Spraying for Wear and Corrosion Applications, J. Therm. Spray Technol., 2015, 24, p 235-243
98. C. Lyphout, S. Björklund, M. Karlsson, M. Runte, G. Reisel, and P. Boccaccio, Screening Design of Supersonic Air Fuel Processing for Hard Metal Coatings, J. Therm. Spray Technol., 2014, 23(8), p 1323-133210.1007/s11666-014-0139-5 ↗
99. K. Tao, X. Zhou, H. Cui, and J. Zhang, Microhardness Variation in Heat-Treated Conventional and Nanostructured NiCrC Coatings Prepared by HVAF Spraying, Surf. Coat. Technol., 2009, 203(10-11), p 1406-141410.1016/j.surfcoat.2008.11.020 ↗
100. Y.-Y. Wang, C.-J. Li, and A. Ohmori, Examination of Factors Influencing the Bond Strength of High Velocity Oxy-Fuel Sprayed Coatings, Surf. Coat. Technol., 2006, 200(9), p 2923-292810.1016/j.surfcoat.2004.11.040 ↗