High Pressure Cold Sprayed (HPCS) and Low Pressure Cold Sprayed (LPCS) Coatings Prepared from OFHC Cu Feedstock: Overview from Powder Characteristics to Coating Properties
Source abstract
Abstract
Cold spraying enables high quality Cu coatings to be deposited for applications where high electrical and/or thermal conductivity is needed. Fully dense Cu coatings can provide an effective corrosion barrier in specific environments. The structure of cold-sprayed Cu coatings is characterized by high deformation which imparts excellent properties. Coating properties depend on powder, the cold spray process and post treatments. First of all, powder characteristics have a strong influence on the formation of pure coatings. Secondly, cold spraying provides dense, adherent, and conductive coatings by using HPCS and LPCS. Furthermore, an addition of Al2O3 particles to the Cu powder in LPCS process significantly improves coating properties. Also, heat treatments improve electrical conductivity. This study summarizes optimal characteristics of Cu powder optimized for cold spraying, achieving high coating quality and compares properties of HPCS Cu, LPCS Cu and Cu+Al2O3 coatings prepared from the same batch of OFHC Cu powder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. A. Papyrin, V. Kosarev, S. Klinkov, A. Alkimov, and V. Fomin, Cold Spray Technology, 1st ed., Elsevier, printed in the Netherlands, 2007, 328 p10.1016/B978-008045155-8/50001-6 ↗
2. R. Dykhuizen and M. Smith, Gas Dynamic Principles of Cold Spray, J. Therm. Spray Technol., 1998, 7(2), p 205-21210.1361/105996398770350945 ↗
3. C. Borchers, F. Gärtner, T. Stoltenhoff, H. Assadi, and H. Kreye, Microstructural and Macroscopic Properties of Cold Sprayed Copper Coatings, J. Appl. Phys., 2003, 93(12), p 10064-1007010.1063/1.1573740 ↗
4. R. Maev and V. Leshchynsky, Air Gas Dynamic Spraying of Powder Mixtures: Theory and Application, J. Therm. Spray Technol., 2006, 15(2), p 198-20510.1361/105996306X108048 ↗
5. V.K. Champagne, Ed., The Cold Spray Materials Deposition Process, Fundamentals and Applications, Woodhead Publishing Limited, Cambridge, 2007, 362 p10.1201/9781439824122 ↗
6. T. Stoltenhoff, H. Kreye, and H.J. Richter, An Analysis of the Cold Spray Process and Its Coatings, J. Therm. Spray Technol., 2001, 11(4), p 542-55010.1361/105996302770348682 ↗
7. T. Schmidt, F. Gärtner, H. Assadi, and H. Kreye, Development of a Generalized Parameter Window for Cold Spray Deposition, Acta Mater., 2006, 54, p 729-74210.1016/j.actamat.2005.10.005 ↗
8. T. Schmidt, H. Assadi, F. Gärtner, H. Richter, T. Stoltenhoff, H. Kreye, and T. Klassen, From Particle Acceleration to Impact and Bonding in Cold Spraying, J. Therm. Spray Technol., 2009, 18(5-6), p 794-80810.1007/s11666-009-9357-7 ↗
9. X.-J. Ning, J.-H. Jang, H.-J. Kim, C.-J. Li, and C. Lee, Cold Spraying of Al-Sn Binary Alloy: Coating Characteristics and Particle Bonding Features, Surf. Coat. Technol., 2008, 202(9), p 1681-168710.1016/j.surfcoat.2007.07.026 ↗
10. A.W. Blackwood and J.E. Casteras, Copper (Cu), Properties of Pure Metals, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM Handbook, Vol. 2, ASM International, 1990, p 1099-120110.31399/asm.hb.v02.a0001117 ↗
11. R.N. Caron and J.T. Staley, Effects of Composition, Processing, and Structure on Properties of Nonferrous Alloys, Copper and Copper Alloys, Materials Selection and Design, ASM Handbook, Vol. 20, ASM International, 199710.31399/asm.hb.v20.a0002462 ↗
12. K. Balani, T. Laha, A. Agarwal, J. Karthikeyan, and N. Munroe, Effect of Carrier Gases on Microstructural and Electrochemical Behavior of Cold-Sprayed 1100 Aluminum Coating, Surf. Coat. Technol., 2005, 195, p 272-27910.1016/j.surfcoat.2004.06.028 ↗
13. W. Kroemmer and P. Heinrich, Cold Spraying—Potential and New Application Ideas, Thermal Spray 2006: Building on 100 Years of Success, B. Marple, M. Hyland, Y.-C. Lau, R. Lima, and J. Voyer, Ed., 15-18 May 2006 (Seattle, Washington, USA), ASM International, 200610.31399/asm.cp.itsc2006p0175 ↗
14. S. Marx, A. Paul, A. Köhler, and G. Hüttl, Cold Spraying—Innovative Layers for New Applications, Thermal Spray 2005: Explore Its Surfacing Potential!, 2-4 May 2005 (Basel, Switzerland), ASM International, 2005, p 209-21510.31399/asm.cp.itsc2005p0209 ↗
15. H. Koivuluoto, J. Näkki, and P. Vuoristo, Corrosion Properties of Cold-Sprayed Tantalum Coatings, J. Therm. Spray Technol., 2009, 18(1), p 75-8210.1007/s11666-008-9281-2 ↗
16. T. Van Steenkiste and D.W. Gorkiewicz, Analysis of Tantalum Coatings Produced by the Kinetic Spray Process, J. Therm. Spray Technol., 2004, 13(2), p 265-27310.1361/10599630419418 ↗
17. T.S. Price, P.H. Shipway, D.G. McCartney, E. Calla, and D. Zhang, A Method for Characterizing the Degree of Inter-Particle Bond Formation in Cold Sprayed Coatings, J. Therm. Spray Technol., 2007, 16(4), p 566-57010.1007/s11666-007-9070-3 ↗
18. M. Grujicic, C.L. Zhao, W.S. DeRosset, and D. Helfritch, Adiabatic Shear Instability Based Mechanism for Particles/Substrate Bonding in the Cold-Gas Dynamic-Spray Process, Mater. Des., 2004, 25, p 681-68810.1016/j.matdes.2004.03.008 ↗
19. H. Assadi, F. Gärtner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51, p 4379-439410.1016/S1359-6454(03)00274-X ↗
20. K. Murray, M. Kearns, and A. Coleman, Design and Production of Powders Tailored to Cold Spraying, 8th HVOF Kolloquium, 2009, p 77
21. R.C. McCune, W.T. Donlon, O.O. Popoola, and E.L. Cartwright, Characterization of Copper Layers Produced by Cold Gas-Dynamic Spraying, J. Therm. Spray Technol., 2000, 9(1), p 73-8210.1361/105996300770350087 ↗
22. A. Kashirin, O. Klyuev, T. Buzdygar, and A. Shkodkin, DYMET Technology Evolution and Application, Thermal Spray 2007: Global Coating Solutions, B. Marple, M. Hyland, Y. Lau, C.-J. Li, R. Lima, and G. Montavon, Ed., 14-16 May 2007 (Beijing, China), ASM International, 2007, p 141-14510.31399/asm.cp.itsc2007p0141 ↗
23. X.-J. Ning, J.-H. Jang, and H.-J. Kim, The Effects of Powder Properties on In-Flight Particle Velocity and Deposition Process During Low Pressure Cold Spray Process, Appl. Surf. Sci., 2007, 253(18), p 7449-745510.1016/j.apsusc.2007.03.031 ↗
24. H. Koivuluoto and P. Vuoristo, Effect of Powder Type and Composition on Structure and Mechanical Properties of Cu+Al2O3 Coatings Prepared by Using Low-Pressure Cold Spray Process, J. Therm. Spray Technol., 2010, 19(5), p 1081-109210.1007/s11666-010-9491-2 ↗
25. E. Irissou, J.-G. Legoux, B. Arsenault, and C. Moreau, Investigation of Al-Al2O3 Cold Spray Coating Formation and Properties, J. Therm. Spray Technol., 2007, 16(5-6), p 661-66810.1007/s11666-007-9086-8 ↗
26. A. Papyrin, V. Kosarev, S. Klinkov, A. Sova, I. Smurov, and P. Bertrand, Investigation of Composites: Metal-Ceramics and Metal-Metal Coatings Produced with Cold Spray Equipment with Ejector, Thermal Spray 2008: Thermal Spray Crossing Borders, E. Lugscheider, Ed., 2-4 June 2008 (Maastricht, The Netherlands), DVS, 2008, p 611-61510.31399/asm.cp.itsc2008p0599 ↗
27. A. Sova, A. Papyrin, and I. Smurov, Influence of Ceramic Powder Size on Process of Cermet Coating Formation by Cold Spray, J. Therm. Spray Technol., 2009, 18(4), p 633-64110.1007/s11666-009-9359-5 ↗
28. P. Richter and H. Höll, Latest Technology for Commercially Available Cold Spray Systems, Thermal Spray 2006: Building on 100 Years of Success, B. Marple, M. Hyland, Y.-C. Lau, R. Lima, and J. Voyer, Ed., 15-18 May 2006 (Seattle, Washington, USA), ASM International, 200610.31399/asm.cp.itsc2006p1447 ↗
29. B. Djordjevic and R. Maev, SIMATTM Application for Aerospace Corrosion Protection and Structural Repair, Thermal Spray 2006: Building on 100 Years of Success, B. Marple, M. Hyland, Y.-C. Lau, R. Lima, and J. Voyer, Ed., 15-18 May 2006 (Seattle, Washington, USA), ASM International, 200610.31399/asm.cp.itsc2006p0185 ↗
30. A. Shkodkin, A. Kashirin, O. Klyuev, and T. Buzdygar, The Basic Principles of DYMET Technology, Thermal Spray 2006: Building on 100 Years of Success, B. Marple, M. Hyland, Y.-C. Lau, R. Lima, and J. Voyer, Ed., 15-18 May 2006 (Seattle, Washington, USA), ASM International, 200610.1361/105996306X124383 ↗
31. F. Gärtner, T. Stoltenhoff, J. Voyer, H. Kreye, S. Riekehr, and M. Kocak, Mechanical Properties of Cold-Sprayed and Thermally Sprayed Copper Coatings, Surf. Coat. Technol., 2006, 200, p 6770-678210.1016/j.surfcoat.2005.10.007 ↗
32. P.A. Schweitzer, Ed., Corrosion Engineering Handbook, Marcel Dekker, New York, 1996, 736 p
33. H. Koivuluoto and P. Vuoristo, Structural Analysis of Cold-Sprayed Nickel-Based Metallic and Metallic-Ceramic Coatings, J. Therm. Spray Technol., 2010, 19(5), p 975-98910.1007/s11666-010-9481-4 ↗
34. A. Cohen, Corrosion of Copper and Copper Alloys, Corrosion: Materials, Vol 13B, ASM Handbook, ASM International, 2005, p 125-163
35. D.A. Jones, Principles and Prevention of Corrosion, 2nd ed., Prentice-Hall, Upper Saddle River, NJ, 1996, 572 p
36. W. Callister, Jr., Materials Science and Engineering, an Introduction, 5th ed., John Wiley &Sons Inc., printed in United State of America, 2000, 871 p10.1108/acmm.2000.12847aae.001 ↗
37. T.H. Courtney, Mechanical Behavior of Materials, 2nd ed., McGraw-Hill Publishing Company, Singapore, 2000, 733 p
38. E. Calla, D. G. McCartney, and P. Shipway, Effect of Heat Treatment on the Structure and Properties of Cold Sprayed Copper, Thermal Spray 2005: Explore Its Surfacing Potential!, 2-4 May 2005 (Basel, Switzerland), ASM International, 200510.31399/asm.cp.itsc2005p0170 ↗
39. T. Xiong, Z. Bao, T. Li, and Z. Li, Study on Cold-Sprayed Copper Coating’s Properties and Optimizing Parameters for Spraying Process, Thermal Spray 2005: Explore Its Surfacing Potential!, 2-4 May 2005 (Basel, Switzerland), ASM International, 2005, p 178-18310.31399/asm.cp.itsc2005p0178 ↗
40. H. Koivuluoto, J. Kiilakoski, and P. Vuoristo, Effect of Powders and Heat Treatments on Electrical Conductivity of HPCS and LPCS Cu Coatings, SMT XXIV (Dresden, Germany), 2010, submitted
41. T. Stoltenhoff, C. Borchers, F. Gärtner, and H. Kreye, Microstructures and Key Properties of Cold-Sprayed and Thermally Sprayed Copper Coatings, Surf. Coat. Technol., 2006, 200, p 4947-496010.1016/j.surfcoat.2005.05.011 ↗
42. T. Hussain, D. McCartney, P. Shipway, and D. Zhang, Bonding Mechanisms in Cold Spraying: The Contributions of Metallurgical and Mechanical Components, J. Therm. Spray Technol., 2009, 18(3), p 364-37910.1007/s11666-009-9298-1 ↗
43. M. Fukumoto, M. Mashiko, M. Yamada, and E. Yamaguchi, Deposition Behavior of Copper Particles onto Flat Substrate Surface in Cold Spraying, Thermal Spray 2009: Expanding Thermal Spray Performance to New Markets and Applications, B. Marple, M. Hyland, Y.-C. Lau, C.-J. Li, R. Lima, and G. Montavon, Ed., 4-7 May 2009 (Las Vegas, Nevada, USA), ASM International, 2009, p 273-27810.31399/asm.cp.itsc2009p0273 ↗
44. M. Grujicic, J. Saylor, D. Beasley, W. DeRosset, and D. Helfritch, Computational Analysis of the Interfacial Bonding Between Feed-Powder Particles and the Substrate in the Cold-Gas Dynamic-Spray Process, Appl. Surf. Sci., 2003, 219, p 211-22710.1016/S0169-4332(03)00643-3 ↗
45. S. Klinkov, V. Kosarev, and M. Rein, Cold Spray Deposition: Significance of Particle Impact Phenomena, Aerosp. Sci. Technol., 2005, 9, p 582-59110.1016/j.ast.2005.03.005 ↗
46. H. Mäkinen (Koivuluoto), J. Lagerbom, and P. Vuoristo, Adhesion of Cold Sprayed Coatings: Effect of Powder, Substrate, and Heat Treatment, Thermal Spray 2007: Global Coating Solutions, B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, and G. Montavon, Ed., ASM International, 14-16 May 2007 (Beijing, China), 2007, p 31-3610.31399/asm.cp.itsc2007p0031 ↗
47. T. Kairet, G. Di Stefano, M. Degrez, F. Campana, and J.-P. Janssen, Comparison Between Coatings from two Different Copper Powders: Mechanical Properties, Hardness and Bond Strength, Thermal Spray 2006: Building on 100 Years of Success, B.R. Marple, M.M. Hyland, Y.C. Lau, R.S. Lima, and J. Voyer, Ed., 15-18 May 2006 (Seattle, WA, USA), ASM International, 200610.31399/asm.cp.itsc2006p0169 ↗
48. H. Assadi, T. Schmidt, H. Richter, J.-O. Kliemann, K. Binder, F. Gärtner, T. Klassen, and H. Kreye, On Parameter Selection in Cold Spraying, J. Therm. Spray Technol., 2011, 20(6), p 1161-117610.1007/s11666-011-9662-9 ↗
49. H. Fukanuma and N.A. Ohno, A Study of Adhesive Strength of Cold Spray Coatings, Thermal Spray 2004: Advances in Technology and Application, 10-12 May 2004 (Osaka, Japan), ASM International, 200410.31399/asm.cp.itsc2004p0329 ↗
50. P. Sudharshan Phani, D. Srinivasa Rao, S.V. Joshi, and G. Sundararajan, Effect of Process Parameters and Heat Treatments on Properties of Cold Sprayed Copper Coatings, J. Therm. Spray Technol., 2007, 16(3), p 425-43410.1007/s11666-007-9048-1 ↗
51. K.-R. Donner, F. Gärtner, and T. Klassen, Potential of Cold Gas Spraying in Powder Electronic Applications, Thermal Spray 2010: Global Solutions for Future Application, 3-5 May 2010 (Singapore), DVS, 2010, 6 p10.31399/asm.cp.itsc2010p0247 ↗