journal article·2015-10

Characterization of Microstructure and Thermal Properties of YSZ Coatings Obtained by Axial Suspension Plasma Spraying (ASPS)

Ashish Ganvir, Nicholas Curry, Stefan Björklund, Nicolaie Markocsan, Per Nylén

Publisher page

Abstract

The paper aims at demonstrating various microstructures which can be obtained using the suspension spraying technique and their respective significance in enhancing the thermal insulation property of a thermal barrier coating. Three different types of coating microstructures are discussed which were produced by the Axial Suspension Plasma Spraying. Detailed characterization of coatings was then performed. Optical and scanning electron microscopy were utilized for microstructure evaluations; x-ray diffraction for phase analysis; water impregnation, image analysis, and mercury intrusion porosimetry for porosity analysis, and laser flash analysis for thermal diffusivity measurements were used. The results showed that Axial Suspension Plasma Spraying can generate vertically cracked, porous, and feathery columnar-type microstructures. Pore size distribution was found in micron, submicron, and nanometer range. Higher overall porosity, the lower density of vertical cracks or inter-column spacing, and higher inter-pass porosity favored thermal insulation property of the coating. Significant increase in thermal diffusivity and conductivity was found at higher temperature, which is believed to be due to the pore rearrangement (sintering and pore coarsening). Thermal conductivity values for these coatings were also compared with electron beam physical vapor deposition (EBPVD) thermal barrier coatings from the literature and found to be much lower.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Catalytic Processes in Materials Science · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. P. Fauchais and G. Montavon, Latest Developments in Suspension and Liquid Precursor Thermal Spraying, J. Therm. Spray Technol., 2010, 19(1-2), p 226-23910.1007/s11666-009-9446-7 ↗
2. A. Killinger, R. Gadow, G. Mauer, A. Guignard, R. Vassen, and D. Stöver, Review of New Developments in Suspension and Solution Precursor Thermal Spray Processes, J. Therm. Spray Technol., 2011, 20(4), p 677-69510.1007/s11666-011-9639-8 ↗
3. L. Pawlowski, Suspension and Solution Thermal Spray Coatings, Surf. Coat. Technol., 2009, 203(19), p 2807-282910.1016/j.surfcoat.2009.03.005 ↗
4. A. Ganvir, N. Curry, N. Markocsan, P. Nylén, and F.-L. Toma, Comparative Study of Suspension Plasma Sprayed and Suspension High Velocity Oxy-Fuel Sprayed YSZ Thermal Barrier Coatings, Surf. Coat. Technol., 2015, 268, p 70-7610.1016/j.surfcoat.2014.11.054 ↗
5. N. Curry, Z. Tang, N. Markocsan, and P. Nylén, Influence of Bond Coat Surface Roughness on the Structure of Axial Suspension Plasma Spray Thermal Barrier Coatings—Thermal and Lifetime Performance, Surf. Coat. Technol., 2015, 268, p 15-2310.1016/j.surfcoat.2014.08.067 ↗
6. K. VanEvery, M.J.M. Krane, R.W. Trice, H. Wang, W. Porter, M. Besser, D. Sordelet, J. Ilavsky, and J. Almer, Column Formation in Suspension Plasma-Sprayed Coatings and Resultant Thermal Properties, J. Therm. Spray Technol., 2011, 20(4), p 817-82810.1007/s11666-011-9632-2 ↗
7. R. Vassen, H. Kassner, G. Mauer, and D. Stöver, Suspension Plasma Spraying: Process Characteristics and Applications, J. Therm. Spray Technol., 2010, 19(1-2), p 219-22510.1007/s11666-009-9451-x ↗
8. N. Curry, K. VanEvery, T. Snyder, and N. Markocsan, Thermal Conductivity Analysis and Lifetime Testing of Suspension Plasma-Sprayed Thermal Barrier, Coatings, 2014, 4(3), p 630-65010.3390/coatings4030630 ↗
9. H. Guo, H. Murakami, and S. Kuroda, Segmentation Cracks in Plasma Sprayed Thin Thermal Barrier Coatings, Advanced Ceramic Coatings and Interfaces: Ceramic Engineering and Science Proceedings, D. Zhu, U. Schulz, A. Wereszczak, and E. Lara-Curzio, Ed., Wiley Inc., Hoboken, 2006, p 17-2710.1002/9780470291320.ch2 ↗
10. M. Karger, R. Vassen, and D. Stöver, Atmospheric Plasma Sprayed Thermal Barrier Coatings with High Segmentation Crack Densities: Spraying Process, Microstructure and Thermal Cycling Behavior, Surf. Coat. Technol., 2011, 206(1), p 16-2310.1016/j.surfcoat.2011.06.032 ↗
11. A. Bacciochini, G. Montavon, J. Ilavsky, A. Denoirjean, and P. Fauchais, Porous Architecture of SPS Thick YSZ Coatings Structured at the Nanometer Scale (~50 nm), J. Therm. Spray Technol., 2010, 19(1-2), p 198-20610.1007/s11666-009-9429-8 ↗
12. P.L. Fauchais, J.V.R. Heberlein, and M. Boulos, Thermal Spray Fundamentals: From Powder to Part, Springer, Berlin, 201410.1007/978-0-387-68991-3 ↗
13. “ImageJ,” Wikipedia, the Free Encyclopedia, 09 Feb 2015
14. R.W. Cheary, A.A. Coelho, and J.P. Cline, Fundamental Parameters Line Profile Fitting in Laboratory Diffractometers, J Res Natl Inst Stand Technol, 2004, 109(1), p 2510.6028/jres.109.002 ↗
15. D.L. Bish and S.A. Howard, Quantitative Phase Analysis Using the Rietveld Method, J. Appl. Crystallogr., 1988, 21(2), p 86-9110.1107/S0021889887009415 ↗
16. L.L. Pawel Sokolowski, A Comparison of Microstructure and of Thermal Transport Properties of Yttria and Ceria Stabilized Zirconia Coatings Deposited by Suspension Plasma Spraying, Conference: ITSC 2014, Barcelona, Spain, Vol DVS 302, 201410.31399/asm.cp.itsc2014p0263 ↗
17. P. Sokołowski, S. Kozerski, L. Pawłowski, and A. Ambroziak, The Key Process Parameters Influencing Formation of Columnar Microstructure in Suspension Plasma Sprayed Zirconia Coatings, Surf. Coat. Technol., 2015, 260, p 97-10610.1016/j.surfcoat.2014.08.078 ↗
18. R. Taylor, Thermal Conductivity Determinations of Thermal Barrier Coatings, Mater. Sci. Eng. A, 1998, 245(2), p 160-16710.1016/S0921-5093(97)00847-2 ↗
19. T.A. Taylor, Thermal Barrier Coating for Substrates and Process for Producing It, U.S. Patent No. 5073433
20. P. Carpio, Q. Blochet, B. Pateyron, L. Pawłowski, M.D. Salvador, A. Borrell, and E. Sánchez, Correlation of Thermal Conductivity of Suspension Plasma Sprayed Yttria Stabilized Zirconia Coatings with Some Microstructural Effects, Mater. Lett., 2013, 107, p 370-37310.1016/j.matlet.2013.06.051 ↗
21. H. Guo, S. Kuroda, and H. Murakami, Microstructures and Properties of Plasma-Sprayed Segmented Thermal Barrier Coatings, J. Am. Ceram. Soc., 2006, 89(4), p 1432-143910.1111/j.1551-2916.2005.00912.x ↗
22. I.O. Golosnoy, A. Cipitria, and T.W. Clyne, Heat Transfer Through Plasma-Sprayed Thermal Barrier Coatings in Gas Turbines: A Review of Recent Work, J. Therm. Spray Technol., 2009, 18(5-6), p 809-82110.1007/s11666-009-9337-y ↗
23. A. Guignard, G. Mauer, R. Vaßen, and D. Stöver, Deposition and Characteristics of Submicrometer-Structured Thermal Barrier Coatings by Suspension Plasma Spraying, J. Therm. Spray Technol., 2012, 21(3-4), p 416-42410.1007/s11666-012-9762-1 ↗
24. T.R. Kakuda, A.M. Limarga, T.D. Bennett, and D.R. Clarke, Evolution of Thermal Properties of EB-PVD 7YSZ Thermal Barrier Coatings with Thermal Cycling, Acta Mater., 2009, 57(8), p 2583-259110.1016/j.actamat.2009.02.019 ↗
25. J.R. Nicholls, K.J. Lawson, A. Johnstone, and D.S. Rickerby, Methods to Reduce the Thermal Conductivity of EB-PVD TBCs, Surf. Coat. Technol., 2002, 151-152, p 383-39110.1016/S0257-8972(01)01651-6 ↗
26. N. Curry, N. Markocsan, X.-H. Li, A. Tricoire, and M. Dorfman, Next Generation Thermal Barrier Coatings for the Gas Turbine Industry, J. Therm. Spray Technol., 2011, 20(1-2), p 108-11510.1007/s11666-010-9593-x ↗
27. W.J. Nicholas, Curry, “Impact of Impurity Content on the Sintering Resistance and Phase Stability of Dysprosia- and Yttria-Stabilized Zirconia Thermal Barrier Coatings”, J. Therm. Spray Technol., 2013, 23, p 160-169
28. L. Latka, S.B. Goryachev, S. Kozerski, and L. Pawlowski, Sintering of Fine Particles in Suspension Plasma Sprayed Coatings, Materials, 2010, 3(7), p 3845-386610.3390/ma3073845 ↗
29. I.O. Golosnoy, S.A. Tsipas, and T.W. Clyne, An Analytical Model for Simulation of Heat Flow in Plasma-Sprayed Thermal Barrier Coatings, J. Therm. Spray Technol., 2005, 14(2), p 205-21410.1361/10599630523764 ↗