journal article·2009-03

Corrosion Properties of Cold-Sprayed Tantalum Coatings

Heli Koivuluoto, Jonne Näkki, Petri Vuoristo

Publisher page

Abstract

Cold spraying enables the production of pure and dense metallic coatings. Denseness (impermeability) plays an important role in the corrosion resistance of coatings, and good corrosion resistance is based on the formation of a protective oxide layer in case of passivating metals and metal alloys. The aim of this study was to investigate the microstructural details, denseness, and corrosion resistance of two cold-sprayed tantalum coatings with a scanning electron microscope and corrosion tests. Polarization measurements were taken to gain information on the corrosion properties of the coatings in 3.5 wt.% NaCl and 40 wt.% H2SO4 solutions at room temperature and temperature of 80 °C. Standard and improved tantalum powders were tested with different spraying conditions. The cold-sprayed tantalum coating prepared from improved tantalum powder with advanced cold spray system showed excellent corrosion resistance: in microstructural analysis, it showed a uniformly dense microstructure, and, in addition, performed well in all corrosion tests.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Materials Engineering and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. C. Borchers, F. Gärtner, T. Stoltenhoff, H. Assadi, and H. Kreye, 2003 Microstructural and macroscopic properties of cold sprayed copper coatings, Journal of Applied Physics, 93(12), p, 10064-1007010.1063/1.1573740 ↗
2. R.G. Maev and V. Leshchynsky, Air Gas Dynamic Spraying of Powder Mixtures: Theory and Application, Journal of Thermal Spray Technology, 2006, 15(2), p 198–20510.1361/105996306X108048 ↗
3. V.K. Champagne, Ed., The Cold Spray Materials Deposition Process: Fundamentals and Applications, Woodhead publishing limited, Cambridge, England, 2007, 362 p
4. T. Stoltenhoff, H. Kreye, and H.J. Richter, An Analysis of the Cold Spray Process and its Coatings, Journal of Thermal Spray Technology, 2002, 11(4), p 542–55010.1361/105996302770348682 ↗
5. R.C. Dykhuizen and M.F. Smith, Gas Dynamic Principles of Cold Spray, Journal of Thermal Spray Technology, 1998, 7(2), p 205–21210.1361/105996398770350945 ↗
6. K. Balani, T. Laha, A. Agarwal, J. Karthikeyan, and N. Munroe, Effect of carrier gases on microstructural and electrochemical behavior of cold-sprayed 1100 aluminum coating, Surface & Coatings Technology, 2005, 195, p 272–27910.1016/j.surfcoat.2004.06.028 ↗
7. D.A. Jones, 1996 Principles and Prevention of Corrosion 2nd ed, Prentice-Hall, Upper Saddle River, NJ, p. 572
8. D.E.J. Talbot and J.D.R. Talbot, Corrosion Science and Technology, CRC Press LLC, 1998, p 39010.1201/9781420049886 ↗
9. ASM Metals Handbook Online Volume 2, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, Pure Metals, Properties of Pure Metals, Tantalum
10. ASM Metals Handbook Online Volume 13B, Corrosion: Materials, Corrosion of nonferrous Alloys and Speciality Products, Corrosion of Tantalum and Tantalum Alloys
11. S. Zein El Abedin, U. Welz-Biermann, and F. Endres, A study on the electrodeposition of tantalum on NiTi alloy in an ionic liquid and corrosion behaviour of the coated alloy, Electrochemistry Communications, 2005, 7, p 941–94610.1016/j.elecom.2005.06.007 ↗
12. S. Maeng, L. Axe, T.A. Tyson, L. Gladczuk, and M. Sosnowski, Corrosion behaviour of magnetron sputtered α- and β-Ta coatings on AISI 4340 steel as a function of coating thickness, Corrosion Science, 2006, 48, p 2154–217110.1016/j.corsci.2005.08.007 ↗
13. T. Kinos, S.L. Chen, P. Siitonen, and P. Kettunen, Densification of Plasma-Sprayed Titanium and Tantalum Coatings, Journal of Thermal Spray Technology, 1996, 5(4), p 439–44410.1007/BF02645274 ↗
14. K.A. de Souza and A. Robin, Influence of concentration and temperature on the corrosion behavior of titanium, titanium-20 and 40% tantalum alloys and tantalum in sulfuric acid solutions, Materials Chemistry and Physics, 2007, 103, p 351–36010.1016/j.matchemphys.2007.02.026 ↗
15. H. Hoell and P. Richter, KINETIKS® 4000 – New Perspective with Cold Spraying, Thermal Spray 2008: Thermal Spray Crossing Borders, DVS, June 2-4, 2008 (Maastricht, The Netherlands), p 210.31399/asm.cp.itsc2008p0467 ↗
16. T. Schmidt, F. Gärtner, and H. Kreye, New Developments in Cold Spray Based on Higher Gas- and Particle Temperatures, Journal of Thermal Spray Technology, 2006, 15(4), p 488–49410.1361/105996306X147144 ↗
17. P. Richter and H. Höll, Latest Technology for Commercially Available Cold Spray Systems, Thermal Spray 2006: Building on 100 Years of Success, B.R. Marple, M.M. Hyland, Y.-C. Lau, R.S. Lima, and J. Voyer, Eds., May 15-18 (Seattle, Washington, USA), ASM International, p 310.31399/asm.cp.itsc2006p1447 ↗
18. H. Kreye, T. Schmidt, F. Gärtner, and T. Stoltenhoff, The Cold Spray Process and Its Optimization, Thermal Spray 2006: Building on 100 Years of Success, B.R. Marple, M.M. Hyland, Y.-C. Lau, R.S. Lima, and J. Voyer, Eds., May 15-18 (Seattle, Washington, USA), ASM International, p 510.31399/asm.cp.itsc2006p0083 ↗
19. T. Van Steenkiste and D.W. Gorkiewicz, Analysis of Tantalum Coatings Produced by the Kinetic Spray Process, Journal of Thermal Spray Technology, 2004, 13(2), p 265–27310.1361/10599630419418 ↗
20. T.H. Van Steenkiste, J.R. Smith, and R.E. Teets, 2002 Aluminum Coatings via Kinetic Spray with Relatively Large Powder Particles, Surface and Coatings Technology, 154, 237–25210.1016/S0257-8972(02)00018-X ↗
21. H. Koivuluoto, J. Lagerbom, and P. Vuoristo, Microstructural Studies of Cold Sprayed Copper, Nickel, and Copper-30% Nickel Coatings, Journal of Thermal Spray Technology, 2007, 16(4), p 488–49710.1007/s11666-007-9060-5 ↗
22. Standard Test Method of Salt Spray (Fog) Testing, B117-90, Annual Book of ASTM Standards, ASTM, p 19-25
23. P.A. Schweitzer, Ed., Corrosion Engineering Handbook, Marcel Dekker, 1996, p 736
24. W.S. Tait, 1994 An Introduction to Electrochemical Corrosion Testing for Practicing Engineers and Scientists, Pair O Docs Publications, Racine, WI, p. 138