Influence of Topcoat-Bondcoat Interface Roughness on Stresses and Lifetime in Thermal Barrier Coatings
Source abstract
Abstract
Abstract In previous work, it was observed that atmospheric plasma sprayed bond coats perform better than their HVOF counterparts, which is contrary to current literature data. The objective of this work is to understand the observed difference with the aid of finite-element modeling. Different thermally grown oxide layer thicknesses and surface topographies are evaluated and the modeling results are compared with current theories based on simplified sinusoidal profiles. It is shown that modeling can be used as an effective tool to understand the stress behavior in TBCs with different roughness profiles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. H.E. Evans, Oxidation Failure of TBC Systems: An Assessment of Mechanisms, Surf. Coat. Technol., 2011, 206, p 1512-152110.1016/j.surfcoat.2011.05.053 ↗
2. T.S. Hille, S. Turteltaub, and A.S.J. Suiker, Oxide Growth and Damage Evolution in Thermal Barrier Coatings, Eng. Fract. Mech., 2011, 78, p 2139-215210.1016/j.engfracmech.2011.04.003 ↗
3. D.-J. Kim, I.-H. Shin, J.-M. Koo, C.-S. Seok, and T.-W. Lee, Failure Mechanisms of Coin-Type Plasma-Sprayed Thermal Barrier Coatings with Thermal Fatigue, Surf. Coat. Technol., 2010, 205, p S451-S45810.1016/j.surfcoat.2010.08.130 ↗
4. R. Vaßen, S. Giesen, and D. Stöver, Lifetime of Plasma-Sprayed Thermal Barrier Coatings: Comparison of Numerical and Experimental Results, J. Therm. Spray Technol., 2009, 18(5-6), p 835-84510.1007/s11666-009-9389-z ↗
5. O. Trunova, T. Beck, R. Herzog, R.W. Steinbrech, and L. Singheiser, Damage Mechanisms and Lifetime Behavior of Plasma Sprayed Thermal Barrier Coating Systems for Gas Turbines—Part I: Experiments, Surf. Coat. Technol., 2008, 202, p 5027-503210.1016/j.surfcoat.2008.05.006 ↗
6. W.R. Chen, X. Wu, B.R. Marple, and P.C. Patnaik, The Growth and Influence of Thermally Grown Oxide in a Thermal Barrier Coating, Surf. Coat. Technol., 2006, 201, p 1074-107910.1016/j.surfcoat.2006.01.023 ↗
7. D. Zhu, S.R. Choi, and R.A. Miller, Development and Thermal Fatigue Testing of Ceramic Thermal Barrier Coatings, Surf. Coat. Technol., 2004, 188-189, p 146-15210.1016/j.surfcoat.2004.08.017 ↗
8. K.W. Schlichting, N.P. Padture, E.H. Jordan, and M. Gell, Failure Modes in Plasma-Sprayed Thermal Barrier Coatings, Mater. Sci. Eng., A, 2003, 342, p 120-13010.1016/S0921-5093(02)00251-4 ↗
9. S. Kyaw, A. Jones, and T. Hyde, Predicting Failure Within TBC System: Finite Element Simulation of Stress Within TBC System as Affected by Sintering of APS TBC, Geometry of Substrate and Creep of TGO, Eng. Failure Anal., 2013, 27, p 150-16410.1016/j.engfailanal.2012.07.005 ↗
10. S. Wei, W. Fu-chi, F. Qun-bo, and M. Zhuang, Lifetime Prediction of Plasma-Sprayed Thermal Barrier Coating Systems, Surf. Coat. Technol., 2013, 217, p 39-4510.1016/j.surfcoat.2012.11.069 ↗
11. M. Bäker, Finite Element Simulation of Interface Cracks in Thermal Barrier Coatings, Comput. Mater. Sci., 2012, 64, p 79-8310.1016/j.commatsci.2012.02.044 ↗
12. M. Ranjbar-Far, J. Absi, and G. Mariaux, Finite Element Modeling of the Different Failure Mechanisms of a Plasma Sprayed Thermal Barrier Coatings System, J. Therm. Spray Technol., 2012, 21(6), p 1234-124410.1007/s11666-012-9814-6 ↗
13. H.-Y. Qi and X.-G. Yang, Computational Analysis for Understanding the Failure Mechanism of APS-TBC, Comput. Mater. Sci., 2012, 57, p 38-4210.1016/j.commatsci.2011.12.026 ↗
14. S. Asghari and M. Salimi, Finite Element Simulation of Thermal Barrier Coating Performance Under Thermal Cycling, Surf. Coat. Technol., 2010, 205, p 2042-205010.1016/j.surfcoat.2010.08.099 ↗
15. U. Hermosilla, M.S.A. Karunaratne, I.A. Jones, T.H. Hyde, and R.C. Thomson, Modelling the High Temperature Behaviour of TBCs Using Sequentially Coupled Microstructural-Mechanical FE Analyses, Mater. Sci. Eng., A, 2009, 513-514, p 302-31010.1016/j.msea.2009.02.006 ↗
16. M. Białas, Finite Element Analysis of Stress Distribution in Thermal Barrier Coatings, Surf. Coat. Technol., 2008, 202, p 6002-601010.1016/j.surfcoat.2008.06.178 ↗
17. P. Bednarz, “Finite Element Simulation of Stress Evolution in Thermal Barrier Coating Systems,” Ph.D. thesis, Forschungszentrum Jülich GmbH, 2007
18. M. Martena, D. Botto, P. Fino, S. Sabbadini, M.M. Gola, and C. Badini, Modelling of TBC System Failure: Stress Distribution as a Function of TGO Thickness and Thermal Expansion Mismatch, Eng. Failure Anal., 2006, 13, p 409-42610.1016/j.engfailanal.2004.12.027 ↗
19. H. Brodin, M. Jinnestrand, and S. Sjöström, Modelling and Experimental Verification of Delamination Crack Growth in an Air-Plasma-Sprayed Thermal Barrier Coating, 15th European Conference of Fracture (ECF15), Stockholm, Sweden, 2004
20. B.G. Nair, J.P. Singh, and M. Grimsditch, Stress Analysis in Thermal Barrier Coatings Subjected to Long-Term Exposure in Simulated Turbine Conditions, J. Mater. Sci., 2004, 39, p 2043-205110.1023/B:JMSC.0000017767.36955.5c ↗
21. M.Y. He, J.W. Hutchinson, and A.G. Evans, Simulation of Stresses and Delamination in a Plasma-Sprayed Thermal Barrier System Upon Thermal Cycling, Mater. Sci. Eng., A, 2003, 345, p 172-17810.1016/S0921-5093(02)00458-6 ↗
22. M. Ahrens, R. Vaßen, and D. Stöver, Stress Distributions in Plasma-Sprayed Thermal Barrier Coatings as a Function of Interface Roughness and Oxide Scale Thickness, Surf. Coat. Technol., 2002, 161, p 26-3510.1016/S0257-8972(02)00359-6 ↗
23. E.P. Busso, J. Lin, S. Sakurai, and M. Nakayama, A Mechanistic Study of Oxidation-Induced Degradation in a Plasma-Sprayed Thermal Barrier Coating System. Part I: Model Formulation, Acta Mater., 2001, 49, p 1515-152810.1016/S1359-6454(01)00060-X ↗
24. M. Jinnestrand and S. Sjöström, Investigation by 3D FE Simulations of Delamination Crack Initiation in TBC Caused by Alumina Growth, Surf. Coat. Technol., 2001, 135, p 188-19510.1016/S0257-8972(00)01084-7 ↗
25. R. Ghafouri-Azar, J. Mostaghimi, and S. Chandra, Modeling Development of Residual Stresses in Thermal Spray Coatings, Comput. Mater. Sci., 2006, 35, p 13-2610.1016/j.commatsci.2005.02.007 ↗
26. B. Klusemann, R. Denzer, and B. Svendsen, Microstructure-Based Modeling of Residual Stresses in WC-12Co-Sprayed Coatings, J. Therm. Spray Technol., 2012, 21(1), p 96-10710.1007/s11666-011-9690-5 ↗
27. N. Curry, N. Markocsan, L. Östergren, X.-H. Li, and M. Dorfman, Evaluation of the Lifetime and Thermal Conductivity of Dysprosia Stabilized Thermal Barrier Coating Systems, J. Therm. Spray Technol., 2013, 22(6), p 864-87210.1007/s11666-013-9932-9 ↗
28. W.R. Chen, X. Wu, B.R. Marple, D.R. Nagy, and P.C. Patnaik, TGO Growth Behaviour in TBCs with APS and HVOF Bond Coats, Surf. Coat. Technol., 2008, 202(12), p 2677-268310.1016/j.surfcoat.2007.09.042 ↗
29. M. Di Ferdinando, A. Fossati, A. Lavacchi, U. Bardi, F. Borgioli, C. Borri, C. Giolli, and A. Scrivani, Isothermal Oxidation Resistance Comparison Between Air Plasma Sprayed, Vacuum Plasma Sprayed and High Velocity Oxygen Fuel Sprayed CoNiCrAlY Bond Coats, Surf. Coat. Technol., 2010, 204(15), p 2499-250310.1016/j.surfcoat.2010.01.031 ↗
30. R. Vaßen, G. Kerkhoff, and D. Stöver, Development of A Micromechanical Life Prediction Model for Plasma Sprayed Thermal Barrier Coatings, Mater. Sci. Eng., A, 2001, 303, p 100-10910.1016/S0921-5093(00)01853-0 ↗
31. S.A. Langer, E.R. Fuller, Jr., and W.C. Carter, OOF: An Image-Based Finite-Element Analysis of Material Microstructures, Comput. Sci. Eng., 2001, 3(3), p 15-2310.1109/5992.919261 ↗
32. M. Gupta, N. Curry, N. Markocsan, and P. Nylén, Design of Next Generation Thermal Barrier Coatings—Experiments and Modelling, Surf. Coat. Technol., 2013, 220, p 20-2610.1016/j.surfcoat.2012.09.015 ↗
33. M. Gupta, P. Nylén, and J. Wigren, A Modelling Approach to Design of Microstructures in Thermal Barrier Coatings, J. Ceram. Sci. Technol., 2013, 04(02), p 85-92
34. Z. Wang, A. Kulkarni, S. Deshpande, T. Nakamura, and H. Herman, Effects of Pores and Interfaces on Effective Properties of Plasma Sprayed Zirconia Coatings, Acta Mater., 2003, 51(18), p 5319-533410.1016/S1359-6454(03)00390-2 ↗
35. T. Patterson, A. Leon, B. Jayaraj, J. Liu, and Y.H. Sohn, Thermal Cyclic Lifetime and Oxidation Behavior of Air Plasma Sprayed CoNiCrAlY Bond Coats for Thermal Barrier Coatings, Surf. Coat. Technol., 2008, 203, p 437-44110.1016/j.surfcoat.2008.08.054 ↗