journal article·2022-02Open access

Advances in Thermally Sprayed WC-Based Wear-Resistant Coatings: Co-free Binders, Processing Routes and Tribological Behavior

Kaveh Torkashvand, Shrikant Joshi, Mohit Gupta

Abstract

Abstract A growing understanding of wear behavior of various thermally sprayed ceramic–metallic matrix coatings has occurred over recent years. This has resulted from the continuous evolution in spraying methods as well as material feedstock, and the corresponding new aspects of the field that have been thoroughly explored. This paper aims to review recent developments in thermally sprayed tungsten carbide-based coatings, with specific emphasis on evaluating alternative binders, processing routes and tribological behavior of the coatings. A comprehensive evaluation of various compositions as binders for WC-based coatings, considering environmental concerns and market requirements has been carried out. The properties and performance of various potential alternatives for cobalt as a conventional binder for these coatings have been assessed. Moreover, different thermal spray methods have been reviewed, particularly highlighting the role of processing parameters, phase change and feedstock characteristics in the high-velocity oxy-fuel (HVOF) and high-velocity air fuel (HVAF) techniques. A comparison is made between HVAF and HVOF coatings in terms of their performance under different wear environments. Finally, various scenarios of material removal in HVAF and HVOF coatings, under various wear conditions, have also been reviewed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · High-Temperature Coating Behaviors · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. A. Vardelle, C. Moreau, J. Akedo, H. Ashrafizadeh, C.C. Berndt, J.O. Berghaus, M. Boulos, J. Brogan, A.C. Bourtsalas, A. Dolatabadi, M. Dorfman, T.J. Eden, P. Fauchais, G. Fisher, F. Gaertner, M. Gindrat, R. Henne, M. Hyland, E. Irissou, E.H. Jordan, K.A. Khor, A. Killinger, Y.C. Lau, C.J. Li, L. Li, J. Longtin, N. Markocsan, P.J. Masset, J. Matejicek, G. Mauer et al., The 2016 Thermal Spray Roadmap, J. Therm. Spray Technol., 2016, 25, p 1376-1440.10.1007/s11666-016-0473-x ↗
2. G. Bolelli, L.-M.M. Berger, T. Börner, H. Koivuluoto, L. Lusvarghi, C. Lyphout, N. Markocsan, V. Matikainen, P. Nylén, P. Sassatelli, R. Trache and P. Vuoristo, Tribology of HVOF- and HVAF-Sprayed WC-10Co4Cr Hardmetal Coatings: A Comparative Assessment, Surf. Coat. Technol., 2015, 265, p 125-144. https://doi.org/10.1016/j.surfcoat.2015.01.04810.1016/j.surfcoat.2015.01.048 ↗
3. K. Kumari, K. Anand, M. Bellacci and M. Giannozzi, Effect of Microstructure on Abrasive Wear Behavior of Thermally Sprayed WC-10Co-4Cr Coatings, Wear, 2010, 268(11-12), p 1309-1319. https://doi.org/10.1016/j.wear.2010.02.00110.1016/j.wear.2010.02.001 ↗
4. O. Aranke, W. Algenaid, S. Awe and S. Joshi, Coatings for Automotive Gray Cast Iron Brake Discs: A Review, Coatings, 2019, 9(9), p 1-31.10.3390/coatings9090552 ↗
5. M. Eriksson, F. Bergman and S. Jacobson, On the Nature of Tribological Contact in Automotive Brakes, Wear, 2002, 252, p 26-36.10.1016/S0043-1648(01)00849-3 ↗
6. R. Ahmed, O. Ali, C.C. Berndt and A. Fardan, Sliding Wear of Conventional and Suspension Sprayed Nanocomposite WC-Co Coatings: An Invited Review, J. Therm. Spray Technol., 2021, 30, p 800-861.10.1007/s11666-021-01185-z ↗
7. D. Mari, L. Miguel and C.E. Nebel, Comprehensive Hard Materials, Vol 1 Elsevier, Amsterdam, 2014.
8. M.L. Grilli, D. Valerini, R.R. Piticescu, T. Bellezze, M. Yilmaz, A. Rinaldi, S. Cuesta-López and A. Rizzo, Possible Alternatives to Critical Elements in Coatings for Extreme Applications, IOP Conf. Ser. Mater. Sci. Eng., 2018, 329(1), p 012005.10.1088/1757-899X/329/1/012005 ↗
9. A.H. Tkaczyk, A. Bartl, A. Amato, V. Lapkovskis and M. Petranikova, Sustainability Evaluation of Essential Critical Raw Materials: Cobalt, Niobium, Tungsten and Rare Earth Elements, J. Phys. D. Appl. Phys., 2018, 51(20), p aaba99. https://doi.org/10.1088/1361-6463/aaba9910.1088/1361-6463/aaba99 ↗
10. R.J.K. Wood, S. Herd and M.R. Thakare, A Critical Review of the Tribocorrosion of Cemented and Thermal Sprayed Tungsten Carbide, Tribol. Int., 2018, 119, p 491-509. https://doi.org/10.1016/j.triboint.2017.10.00610.1016/j.triboint.2017.10.006 ↗
11. O.J. Ojo-Kupoluyi, S.M. Tahir, B. Baharudin, M.A. Azmah Hanim and M.S. Anuar, Mechanical Properties of WC-Based Hardmetals Bonded with Iron Alloys: A Review, Mater. Sci. Technol., 2017, 33(5), p 507-517.10.1080/02670836.2016.1186929 ↗
12. J. Yuan, Q. Zhan, J. Huang, S. Ding and H. Li, Decarburization Mechanisms of WC e Co during Thermal Spraying: Insights from Controlled Carbon Loss and Microstructure Characterization, Mater. Chem. Phys., 2013, 142(1), p 165-171. https://doi.org/10.1016/j.matchemphys.2013.06.05210.1016/j.matchemphys.2013.06.052 ↗
13. J.M. Guilemany, J.M. De Paco, J. Nutting and J.R. Miguel, Characterization of the W2C Phase Formed during the High Velocity Oxygen Fuel Spraying of a WC + 12 Pct Co Powder, Metall. Mater. Trans. A, 1999, 30, p 1913-1921.10.1007/s11661-999-0002-3 ↗
14. H.L. De Villiers Lovelock, Powder/Processing/Structure Relationships in WC-Co Thermal Spray Coatings: A Review of the Published Literature, J. Therm. Spray Technol., 1998, 7(3), p 357-373.10.1361/105996398770350846 ↗
15. D.S. Hermiyanty, B.A. Wandira, Future Development of Thermal Spray Coatings. J. Chem. Inf. Model. (2017)
16. C.-J. Li and G.-J. Yang, Relationships between Feedstock Structure, Particle Parameter, Coating Deposition, Microstructure and Properties for Thermally Sprayed Conventional and Nanostructured WC-Co, Int. J. Refract. Met. Hard Mater., 2013, 39, p 2-17. https://doi.org/10.1016/j.ijrmhm.2012.03.01410.1016/j.ijrmhm.2012.03.014 ↗
17. A. Ghabchi, Wear Resistant Carbide-Based Thermal Sprayed Coatings: Process, Properties, Mechanical Degradation and Wear, PhD thesis (2011)
18. P. Fauchais, G. Montavon, R.S. Lima and B.R. Marple, Engineering a New Class of Thermal Spray Nano-Based Microstructures from Agglomerated Nanostructured Particles, Suspensions and Solutions: An Invited Review, J. Phys. D. Appl. Phys., 2011, 44(9), p 93001.10.1088/0022-3727/44/9/093001 ↗
19. V. Katranidis, S. Gu, T.R. Reina, E. Alpay, B. Allcock and S. Kamnis, Experimental Study of High Velocity Oxy-Fuel Sprayed WC-17Co Coatings Applied on Complex Geometries. Part B: Influence of Kinematic Spray Parameters on Microstructure, Phase Composition and Decarburization of the Coatings, Surf. Coat. Technol., 2017, 328, p 499-512.10.1016/j.surfcoat.2017.09.027 ↗
20. Z. Geng, S. Hou, G. Shi, D. Duan and S. Li, Tribological Behaviour at Various Temperatures of WC-Co Coatings Prepared Using Different Thermal Spraying Techniques, Tribol. Int., 2016, 104, p 36-44. https://doi.org/10.1016/j.triboint.2016.08.02510.1016/j.triboint.2016.08.025 ↗
21. B.G. Mellor, Surface Coatings for Protection Against Wear, Woodhead Publishing Limited, Sawston, 2006.
22. S. Hong, Y. Wu, W. Gao, J. Zhang, Y. Zheng and Y. Zheng, Slurry Erosion-Corrosion Resistance and Microbial Corrosion Electrochemical Characteristics of HVOF Sprayed WC-10Co-4Cr Coating for Offshore Hydraulic Machinery, Int. J. Refract. Met. Hard Mater., 2018, 74, p 7-13.10.1016/j.ijrmhm.2018.02.019 ↗
23. M. Hadad, M. Hockauf, L.W. Meyer, G. Marot, J. Lesage, R. Hitzek and S. Siegmann, Adhesion Evaluation of Multilayered Based WC-Co-Cr Thermally Sprayed Coatings, Surf. Coat. Technol., 2008, 202(18), p 4399-4405.10.1016/j.surfcoat.2008.04.016 ↗
24. P. Fauchais, G. Montavon and G. Bertrand, From Powders to Thermally Sprayed Coatings, J. Therm. Spray Technol., 2010, 19(1-2), p 56-80.10.1007/s11666-009-9435-x ↗
25. J. He and J.M. Schoenung, A Review on Nanostructured WC-Co Coatings, Surf. Coat. Technol., 2002, 157(1), p 72-79.10.1016/S0257-8972(02)00141-X ↗
26. H. Wang, Q. Qiu, M. Gee, C. Hou, X. Liu and X. Song, Wear Resistance Enhancement of HVOF-Sprayed WC-Co Coating by Complete Densification of Starting Powder, Mater. Des., 2020, 191, p 108586. https://doi.org/10.1016/j.matdes.2020.10858610.1016/j.matdes.2020.108586 ↗
27. A.M. Venter, V. Luzin, D. Marais, N. Sacks, E.N. Ogunmuyiwa and P.H. Shipway, Interdependence of Slurry Erosion Wear Performance and Residual Stress in WC-12wt%Co and WC-10wt%VC-12wt%Co HVOF Coatings, Int. J. Refract. Met. Hard Mater., 2020, 87, p 105101. https://doi.org/10.1016/j.ijrmhm.2019.10510110.1016/j.ijrmhm.2019.105101 ↗
28. M.L. Grilli, T. Bellezze, E. Gamsjäger, A. Rinaldi, P. Novak, S. Balos, R.R. Piticescu and M.L. Ruello, Solutions for Critical Raw Materials under Extreme Conditions: A Review, Materials (Basel), 2017, 10(3), p 285.10.3390/ma10030285 ↗
29. J.M. Guilemany, J.M. Miguel, S. Vizcaino and F. Climent, Role of Three-Body Abrasion Wear in the Sliding Wear Behaviour of WC–Co Coatings Obtained by Thermal Spraying, Surf. Coat. Technol., 2001, 140(2), p 141-146.10.1016/S0257-8972(01)01033-7 ↗
30. Q. Wang, Z.H. Chen and Z.X. Ding, Performance of Abrasive Wear of WC-12Co Coatings Sprayed by HVOF, Tribol. Int., 2009, 42(7), p 1046-1051.10.1016/j.triboint.2009.02.011 ↗
31. Y.Y. Özbek, N. Canikoğlu, M. Ipek, N. Canikoǧlu and M. Ipek, The Mechanical Properties and Wear Resistance of HVOF Sprayed WC-Co Coatings, Acta Phys. Pol. A, 2016, 129(4), p 600-603.10.12693/APhysPolA.129.600 ↗
32. P. Chivavibul, M. Watanabe, S. Kuroda and K. Shinoda, Effects of Carbide Size and Co Content on the Microstructure and Mechanical Properties of HVOF-Sprayed WC–Co Coatings, Surf. Coat. Technol., 2007, 202, p 509-521.10.1016/j.surfcoat.2007.06.026 ↗
33. M.M. Lima, C. Godoy, J.C. Avelar-Batista and P.J. Modenesi, Toughness Evaluation of HVOF WC–Co Coatings Using Non-Linear Regression Analysis, Mater. Sci. Eng. A, 2003, 357(1-2), p 337-345.10.1016/S0921-5093(03)00204-1 ↗
34. T. Sudaprasert, P.H. Shipway and D.G. McCartney, Sliding Wear Behaviour of HVOF Sprayed WC-Co Coatings Deposited with Both Gas-Fuelled and Liquid-Fuelled Systems, Wear, 2003, 255(7-12), p 943-949.10.1016/S0043-1648(03)00293-X ↗
35. P. Mi, T. Wang and F. Ye, Influences of the Compositions and Mechanical Properties of HVOF Sprayed Bimodal WC-Co Coating on Its High Temperature Wear Performance, Int. J. Refract. Met. Hard Mater., 2017, 69, p 158-163. https://doi.org/10.1016/j.ijrmhm.2017.08.01210.1016/j.ijrmhm.2017.08.012 ↗
36. H.S. Sidhu, B.S. Sidhu and S. Prakash, Wear Characteristics of Cr3C2–NiCr and WC–Co Coatings Deposited by LPG Fueled HVOF, Tribol. Int., 2010, 43(5-6), p 887-890.10.1016/j.triboint.2009.12.016 ↗
37. J. Pulsford, F. Venturi, Z. Pala, S. Kamnis and T. Hussain, Application of HVOF WC-Co-Cr Coatings on the Internal Surface of Small Cylinders: Effect of Internal Diameter on the Wear Resistance, Wear, 2019, 432, p 202965.10.1016/j.wear.2019.202965 ↗
38. H. Kumar, C. Chittosiya and V.N. Shukla, HVOF Sprayed WC Based Cermet Coating for Mitigation of Cavitation, Erosion & Abrasion in Hydro Turbine Blade, Mater. Today Proc., 2018, 5(2), p 6413-6420.10.1016/j.matpr.2017.12.253 ↗
39. S. Usmani, S. Sampath, D.L. Houck and D. Lee, Effect of Carbide Grain Size on the Sliding and Abrasive Wear Behavior of Thermally Sprayed WC-Co Coatings, Tribol. Trans., 1997, 40(3), p 470-478.10.1080/10402009708983682 ↗
40. T.S. Sidhu, S. Prakash and R.D. Agrawal, Studies on the Properties of High-Velocity Oxy-Fuel Thermal Spray Coatings for Higher Temperature Applications, Mater. Sci., 2005, 41(6), p 805-823.10.1007/s11003-006-0047-z ↗
41. U. Kanerva, J. Lagerbom and P. Vuoristo, Development of Thermal Spray Powders for Improved Tribological and Corrosive Applications and Cost-Effective Solutions, Int. J. Mater. Prod. Technol., 2007, 28(3-4), p 377-398.10.1504/IJMPT.2007.013086 ↗
42. J. Liu, T. Chen, C. Yuan and X. Bai, Performance Analysis of Cavitation Erosion Resistance and Corrosion Behavior of HVOF-Sprayed WC-10Co-4Cr, WC-12Co, and Cr 3 C 2-NiCr Coatings, J. Therm. Spray Technol., 2020, 29(4), p 798-810.10.1007/s11666-020-00994-y ↗
43. L.-M. Berger, P. Ettmayer, P. Vuoristo, T. Mäntylä and W. Kunert, Microstructure and Properties of WC-10% Co-4% Cr Spray Powders and Coatings: Part 1. Powder Characterization, J. Therm. Spray Technol., 2001, 10(2), p 311-325.10.1361/105996301770349402 ↗
44. J. Naden, Science and Implementation Plan Security of Supply of Mineral Resources (SoS Minerals) Research Programme 2012–2017. Natural Environment Research Council (2014)
45. IARC Working Group on the Evaluation of Carcinogenic Risks to Humans. Cobalt in Hard Metals and Cobalt Sulfate, Gallium Arsenide, Indium Phosphide and Vanadium Pentoxide. IARC Monographs on the Evaluation of Carcinogenic Risks to Humans, vol. 86 (2006), p. 1
46. National Institutes of Health (NIH), Report on Carcinogens Trichloroethylene (2016). https://ntp.niehs.nih.gov/whatwestudy/assessments/cancer/roc/index.html?utm_source=direct&utm_medium=prod&utm_campaign=ntpgolinks&utm_term=roc
47. V.V. Paul Marsh, Promoting the Sustainable and Responsible Production and Use of Cobalt in All Forms (2020). https://www.cobaltinstitute.org/cobalt-and-carcinogenicity.html
48. G.M. Keegan, I.D. Learmonth and C.P. Case, A Systematic Comparison of the Actual, Potential, and Theoretical Health Effects of Cobalt and Chromium Exposures from Industry and Surgical Implants, Crit. Rev. Toxicol., 2008, 38(8), p 645-674.10.1080/10408440701845534 ↗
49. I. Polyzois, D. Nikolopoulos, I. Michos, E. Patsouris and S. Theocharis, Local and Systemic Toxicity of Nanoscale Debris Particles in Total Hip Arthroplasty, J. Appl. Toxicol., 2012, 32(4), p 255-269.10.1002/jat.2729 ↗
50. L.O. Simonsen, H. Harbak and P. Bennekou, Cobalt Metabolism and Toxicology-A Brief Update, Sci. Total Environ., 2012, 432, p 210-215. https://doi.org/10.1016/j.scitotenv.2012.06.00910.1016/j.scitotenv.2012.06.009 ↗
51. C.Y. Cheang and N. Mohamed, Removal of Cobalt from Ammonium Chloride Solutions Using a Batch Cell through an Electrogenerative Process, Sep. Purif. Technol., 2016, 162, p 154-161.10.1016/j.seppur.2016.02.023 ↗
52. S. Hannis, T. Bide, Cobalt. British Geological Survey (2009)
53. K. Shedd, Cobalt Statistics and Information (2020). https://www.usgs.gov/centers/nmic/cobalt-statistics-and-information
54. Cobalt Price (2020). http://www.metalary.com/cobalt-price/
55. M. Herr, T. Sailer, H.G. Sockel, R. Schulte, H. Feld and L.J. Prakash, Characterisation of Wear Properties of Ultrafine-Grained Hardmetals Using a Special Abrasive Wheel Test, Int. J. Refract. Met. Hard Mater., 2001, 19(4-6), p 371-379.10.1016/S0263-4368(01)00056-7 ↗
56. J.M. Tarragó, C. Ferrari, B. Reig, D. Coureaux, L. Schneider and L. Llanes, Mechanics and Mechanisms of Fatigue in a WC-Ni Hardmetal and a Comparative Study with Respect to WC-Co Hardmetals, Int. J. Fatigue, 2015, 70, p 252-257.10.1016/j.ijfatigue.2014.09.011 ↗
57. W.D. Schubert, M. Fugger, B. Wittmann and R. Useldinger, Aspects of Sintering of Cemented Carbides with Fe-Based Binders, Int. J. Refract. Met. Hard Mater., 2015, 49(1), p 110-123. https://doi.org/10.1016/j.ijrmhm.2014.07.02810.1016/j.ijrmhm.2014.07.028 ↗
58. C. Liu, Alternative Binder Phases for WC Cemented Carbides, MSc thesis (2014). https://www.diva-portal.org/smash/get/diva2:815039/FULLTEXT01.pdf
59. M. Ahmadian, D. Wexler, T. Chandra and A. Calka, Abrasive Wear of WC-FeAl-B and WC-Ni3Al-B Composites, Int. J. Refract. Met. Hard Mater., 2005, 23(3), p 155-159.10.1016/j.ijrmhm.2004.12.002 ↗
60. N. Espallargas, J. Berget, J.M. Guilemany, A.V. Benedetti and P.H. Suegama, Cr3C2-NiCr and WC-Ni Thermal Spray Coatings as Alternatives to Hard Chromium for Erosion-Corrosion Resistance, Surf. Coat. Technol., 2008, 202(8), p 1405-1417.10.1016/j.surfcoat.2007.06.048 ↗
61. L.-M.M. Berger, S. Saaro, T. Naumann, M. Wiener, V. Weihnacht, S. Thiele and J. Suchánek, Microstructure and Properties of HVOF-Sprayed Chromium Alloyed WC-Co and WC-Ni Coatings, Surf. Coat. Technol., 2008, 202(18), p 4417-4421.10.1016/j.surfcoat.2008.04.019 ↗
62. V.V. Sobolev, J.M. Guilemany, J.R. Miguel and J.A. Calero, Investigation of the Development of Coating Structure during High Velocity Oxy-Fuel (HVOF) Spraying of WC-Ni Powder Particles, Surf. Coat. Technol., 1996, 82(1-2), p 114-120.10.1016/0257-8972(95)02656-8 ↗
63. L.-M. Berger, Hardmetals as Thermal Spray Coatings, Powder Metall., 2007, 50(3), p 205-214.10.1179/174329007X246078 ↗
64. L.M. Berger, R. Zieris, S. Saaro, Oxidation of HVOF-Sprayed Hardmetal Coatings, in Proceedings of International Thermal Spray Conference, ITSC 2005 (2005), p 2-410.31399/asm.cp.itsc2005p0969 ↗
65. L.-M.M. Berger, Application of Hardmetals as Thermal Spray Coatings, Int. J. Refract. Met. Hard Mater., 2015, 49(1), p 350-364. https://doi.org/10.1016/j.ijrmhm.2014.09.02910.1016/j.ijrmhm.2014.09.029 ↗
66. G. Barbezat, A.R. Nicol and A. Sickinger, Abrasion, Erosion and Scuffing Resistance of Carbide and Oxide Ceramic Thermal Sprayed Coatings for Different Applications, Wear, 1993, 162, p 529-537.10.1016/0043-1648(93)90538-W ↗
67. S.M. Nahvi and M. Jafari, Microstructural and Mechanical Properties of Advanced HVOF-Sprayed WC-Based Cermet Coatings, Surf. Coat. Technol., 2016, 286, p 95-102. https://doi.org/10.1016/j.surfcoat.2015.12.01610.1016/j.surfcoat.2015.12.016 ↗
68. H. Asgari, G. Saha and M. Mohammadi, Tribological Behavior of Nanostructured High Velocity Oxy-Fuel (HVOF) Thermal Sprayed WC-17NiCr Coatings, Ceram. Int., 2017, 43(2), p 2123-2135. https://doi.org/10.1016/j.ceramint.2016.10.19310.1016/j.ceramint.2016.10.193 ↗
69. L.M. Berger, Hardmetal Coatings-History and Perspective, in Proceedings 11. HVOF Kolloquium Erding (2018), p 93-100
70. L.-M. Berger, S. Saaro, T. Naumann, M. Kašparova and F. Zahálka, Microstructure and Properties of HVOF-Sprayed WC-(W, Cr) 2 C-Ni Coatings, J. Therm. Spray Technol., 2008, 17(3), p 395-403.10.1007/s11666-008-9189-x ↗
71. L.-M. Berger, S. Saaro, T. Naumann, M. Kašparova and F. Zahálka, Influence of Feedstock Powder Characteristics and Spray Processes on Microstructure and Properties of WC–(W, Cr) 2C–Ni Hardmetal Coatings, Surf. Coat. Technol., 2010, 205(4), p 1080-1087.10.1016/j.surfcoat.2010.07.032 ↗
72. A. Al Hamed, Investigation of HVOF Thermal Sprayed Micro/Nanostructured WC-12Co Mixed with Inconel-625 Nickel/Chrome Based Coatings for Erosion/Corrosion Applications, PhD thesis (2015)
73. S. Zimmermann, H. Keller and G. Schwier, New Carbide Based Materials for HVOF Spraying, Therm. Spray Adv. Sci. Appl. Technol., 2003, 1, p 5-8.
74. S. Zimmermann, B. Gries and B. Brüning, New Cermet Powders for HVOF Spraying with Improved Corrosion and Oxidation Resistance for Offshore, Mining and Power Generation Applications, Therm. Spray Bull, 2011, 4(2), p 94-100.
75. V. Testa, S. Morelli, G. Bolelli, B. Benedetti, P. Puddu, P. Sassatelli and L. Lusvarghi, Alternative Metallic Matrices for WC-Based HVOF Coatings, Surf. Coat. Technol., 2020, 402, p 126308. https://doi.org/10.1016/j.surfcoat.2020.12630810.1016/j.surfcoat.2020.126308 ↗
76. Š Houdková, F. Zahálka, M. Kašparová and L.-M. Berger, Comparative Study of Thermally Sprayed Coatings under Different Types of Wear Conditions for Hard Chromium Replacement, Tribol. Lett., 2011, 43(2), p 139-154.10.1007/s11249-011-9791-9 ↗
77. G. Bolelli, T. Börner, F. Bozza, V. Cannillo, G. Cirillo and L. Lusvarghi, Cermet Coatings with Fe-Based Matrix as Alternative to WC–CoCr: Mechanical and Tribological Behaviours, Surf. Coat. Technol., 2012, 206(19-20), p 4079-4094. https://doi.org/10.1016/j.surfcoat.2012.03.09410.1016/j.surfcoat.2012.03.094 ↗
78. Data Sheet, Amperit ® 518, p 8-10 (2018). https://www.hoganas.com/en/powder-technologies/surface-coating/products/
79. H. Liao, B. Normand and C. Coddet, Influence of Coating Microstructure on the Abrasive Wear Resistance of WC/Co Cermet Coatings, Surf. Coat. Technol., 2000, 124(2-3), p 235-242.10.1016/S0257-8972(99)00653-2 ↗
80. G. Bolelli, T. Börner, A. Milanti, L. Lusvarghi, J. Laurila, H. Koivuluoto, K. Niemi and P. Vuoristo, Tribological Behavior of HVOF- and HVAF-Sprayed Composite Coatings Based on Fe-Alloy + WC-12% Co, Surf. Coat. Technol., 2014, 248, p 104-112. https://doi.org/10.1016/j.surfcoat.2014.03.03710.1016/j.surfcoat.2014.03.037 ↗
81. DataSheet, Amperit ® 554, p 7-9 (2018). https://www.hoganas.com/en/powder-technologies/surface-coating/products/
82. P. Chivavibul, M. Watanabe, S. Kuroda, J. Kawakita, M. Komatsu, K. Sato and J. Kitamura, Effect of Powder Characteristics on Properties of Warm-Sprayed WC-Co Coatings, J. Therm. Spray Technol., 2010, 19(1-2), p 81-88.10.1007/s11666-009-9438-7 ↗
83. S. Liu, D. Sun, Z. Fan, H. Ying Yu and H. Min Meng, The Influence of HVAF Powder Feedstock Characteristics on the Sliding Wear Behaviour of WC-NiCr Coatings, Surf. Coat. Technol., 2008, 202(20), p 4893-4900.10.1016/j.surfcoat.2008.03.014 ↗
84. DataSheet, Amperit 551, p 4-5 (2018). https://www.hoganas.com/en/powder-technologies/surface-coating/products/10.1016/j.fopow.2018.10.023 ↗
85. L.F. dos S. Vieira, Comportamento Mecânico Do Aço AISI 4340 Revestido Com WC-CrCNi; WC-10Ni; Ni-20Cr; Ni-Cr-B-Si-Fe; Cr3C2-NiCr Pelo Processo HVOF, Universidade Estadual Paulista (UNESP) (2012). file:///C:/Users/kavtor/Downloads/vieira_lfs_dr_guara.pdf
86. T.Y. Cho, Y.K. Joo, J.H. Yoon, W. Fang, S.H. Zhang and H.G. Chun, Improvement of Surface Properties of Magnetic Shaft Material Inconel718 by HVOF Spray Coating of WC-CrCNi Powder, Adv. Mater. Res., 2013, 774, p 1098-1102.10.4028/www.scientific.net/AMR.774-776.1098 ↗
87. DataSheet, Diamalloy 4006, 1800, p 1-4. https://www.oerlikon.com/ecomaXL/files/metco/oerlikon_DSMTS-0086.4_NiCrWMoSuperalloys.pdf&download=1
88. J.Y.A. Calahorra, C.G. Tiburcio, F. Estupiñan, A.T. Estrada, C.P. Salas, F.A. Calderón and J.A.C. Miramontes Sr., Corrosion Mechanism of NiCrWMo Coating Deposited by HVOF, ECS Trans., 2015, 64(26), p 89.10.1149/06426.0089ecst ↗
89. W.J. Huo, X. Liu, B. Hu and Z.P. Wang, Research on Microstructure and Wear-Resisting Property of NiCrWMo Laser Cladding on K418, Appl. Mech. Mater., 2014, 633, p 782-786.
90. DataSheet, Woka, p 7504-7506 (2014). https://www.oerlikon.com/ecomaXL/files/oerlikon_DSMTS-0056.3_Woka7500_C2C3_37WC_18Alloy.pdf
91. L. Janka, J. Norpoth, C. Tomastik, V. Matikainen and P. Vuoristo, Laser-Induced Precipitation of (W1- XCrx)2C: Mixed Carbide Phase for Improved Wear Resistance of Thermally Sprayed Hardmetal Coatings, Surf. Coat. Technol., 2018, 337, p 177-185. https://doi.org/10.1016/j.surfcoat.2017.12.06110.1016/j.surfcoat.2017.12.061 ↗
92. V. Matikainen, G. Bolelli, H. Koivuluoto, P. Sassatelli, L. Lusvarghi and P. Vuoristo, Sliding Wear Behaviour of HVOF and HVAF Sprayed Cr3C2-Based Coatings, Wear, 2017, 388-389, p 57-71. https://doi.org/10.1016/j.wear.2017.04.00110.1016/j.wear.2017.04.001 ↗
93. B. Venkateshwarlu, B.G. Mohammed Thalib and A. Srikanth, Influence of Critical Plasma Spray Parameter on Microstructural and Tribological Characteristics of Nanostructured Tungsten Carbide-Cobalt Coatings, Procedia Manuf., 2019, 30, p 339-346.10.1016/j.promfg.2019.02.048 ↗
94. M.E. Vinayo, F. Kassabji, J. Guyonnet and P. Fauchais, Plasma Sprayed WC–Co Coatings: Influence of Spray Conditions (Atmospheric and Low Pressure Plasma Spraying) on the Crystal Structure, Porosity, and Hardness, J. Vac. Sci. Technol. Vac. A Surf. Film., 1985, 3(6), p 2483-2489.10.1116/1.572863 ↗
95. J. Voyer and B.R. Marple, Sliding Wear Behavior of High Velocity Oxy-Fuel and High Power Plasma Spray-Processed Tungsten Carbide-Based Cermet Coatings, Wear, 1999, 225-229(I), p 135-145.10.1016/S0043-1648(99)00007-1 ↗
96. J.W. Murray, A. Leva, S. Joshi, T. Hussain, Microstructure and Wear Behaviour of Powder and Suspension Hybrid, Ceram. Int., Elsevier Ltd and Techna Group S.r.l. (2018)
97. S. Mahade, K. Narayan, S. Govindarajan, S. Björklund, N. Curry and S. Joshi, Exploiting Suspension Plasma Spraying to Deposit Wear-Resistant Carbide Coatings, Materials (Basel), 2019, 12, p 2344.10.3390/ma12152344 ↗
98. J. Villafuerte, Modern Cold Spray: Materials, Process, and Applications, Springer, Berlin, 2015.10.1007/978-3-319-16772-5 ↗
99. A.S.M. Ang, C.C. Berndt and P. Cheang, Deposition Effects of WC Particle Size on Cold Sprayed WC-Co Coatings, Surf. Coat. Technol., 2011, 205(10), p 3260-3267. https://doi.org/10.1016/j.surfcoat.2010.11.04510.1016/j.surfcoat.2010.11.045 ↗
100. T. Varis, T. Suhonen, M. Jokipii and P. Vuoristo, Influence of Powder Properties on Residual Stresses Formed in High-Pressure Liquid Fuel HVOF Sprayed WC-CoCr Coatings, Surf. Coat. Technol., 2020, 388, p 125604. https://doi.org/10.1016/j.surfcoat.2020.12560410.1016/j.surfcoat.2020.125604 ↗