journal article·2019-10Open access

Permanent Magnets Produced by Cold Spray Additive Manufacturing for Electric Engines

Jean-Michel Lamarre, Fabrice Bernier

Abstract

With the global trend towards electrification of transport, the interest for various configurations of electric motors is growing. Unfortunately, the low versatility of the motor magnet fabrication technologies limits the development of new motor geometries. Cold spray additive manufacturing was used for shaping permanent magnets for the direct fabrication of electric motor parts without the need for additional assembly steps. This novel technique allows an increase in the design flexibility of electrical machine geometries targeting improved performance. The permanent magnets were deposited from a NdFeB-Al composite powder mix featuring high raw theoretical remanence and coercivity. The role of the process parameters such as powder mix composition, binder granulometry and gas temperature on the magnetic volume fraction and the resulting magnetic properties will be investigated and compared with data from the literature. The use of complex robot toolpath programming necessary to spray on motor parts will be illustrated through an example of the fabrication of a complex shape rotor. The obtained magnetic properties demonstrate the feasibility of using cold spray additive manufacturing as an effective technology to fabricate motor parts without additional assembly steps.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. S. Rogers and S. Boyd, Overview of the DOE Advanced Power Electronics and Electric Motor R&D Program, U.S. Department of Energy Report, 201410.2172/1220540 ↗
2. O. Gutfleisch, M.A. Willard, E. Bruck, C.H. Chen, S.G. Sankar, and J.P. Liu, Magnetic Materials and Devices for the 21st Century: Stronger, Lighter and More Energy Efficient, Adv. Mater., 2011, 23, p 821-84210.1002/adma.201002180 ↗
3. J.J. Wyslocki, Domain Structure of the Arc-Plasma Sprayed Nd-Fe-B Anisotropic Permanent Magnet, J. Magn. Magn. Mater., 1992, 104–107, p 363-36410.1016/0304-8853(92)90835-C ↗
4. M. Willson, S. Bauser, S. Liu, and M. Huang, Plasma Sprayed Nd-Fe-B Permanent Magnets, J. Appl. Phys., 2003, 93, p 7987-798910.1063/1.1558590 ↗
5. G. Rieger, J. Wecker, W. Rodewald, W. Sattler, -W. Fr, T.Duda Bach, and W. Unterberg, Nd-Fe-B Permanent Magnets (Thick Films) Produced by Vacuum-Plasma-Spraying Process, J. Appl. Phys., 2000, 87, p 5329-533110.1063/1.373337 ↗
6. J.A. Gan and C.C. Berndt, Effects of Standoff Distance on Porosity, Phase Distribution and Mechanical Properties of Plasma Sprayed Nd-Fe-B Coatings, Surf. Coat. Technol., 2013, 216, p 127-13810.1016/j.surfcoat.2012.11.040 ↗
7. J.A. Gan and C.C. Berndt, Design and Manufacture of Nd-Fe-B Thick Coatings by the Thermal Spray Process, Surf. Coat. Technol., 2011, 205, p 4697-470410.1016/j.surfcoat.2011.04.034 ↗
8. P. King, S.H. Zahiri, and M.Z. Jahedi, Rare Earth/Metak Composite Formation by Cold Spray, J. Therm. Spray Technol., 2008, 17(2), p 221-22710.1007/s11666-007-9145-1 ↗
9. F. Bernier and J.-M. Lamarre, Metal NdFeB Composite permanent Magnets Produced by Cold Spray, in EVS 29 International Symposium, Montreal, June 2016
10. B.M. Ma et al., Recent Development in Bonded NdFeB Magnets, J. Magn. Magn. Mater., 2002, 239(1–3), p 418-42310.1016/S0304-8853(01)00609-6 ↗
11. L. Li et al., Fabrication of Highly Dense Isotropic Nd-Fe-B Nylon Bonded Magnets Via Extrusion-Based Additive Manufacturing, Addit. Manuf., 2018, 21, p 495-50010.1016/j.addma.2018.04.001 ↗
12. Krishnasamy, J. and M. Hosek, Spray-Formed Hybrid-Field Traction Motor. SAE Technical Papers, 201710.4271/2017-01-1225 ↗
13. J. Pattison, S. Celotto, R. Morgan, M. Bray, and W. O’Neill, Cold Gas Dynamic Manufacturing: A Non-Thermal Approach to Freeform Fabrication, Inter. J. Mach. Tools Manuf., 2007, 47(3–4), p 627-63410.1016/j.ijmachtools.2006.05.001 ↗