Hybrid Thermal Spray: A Pathway to Realize Novel Coating Microstructures and Properties
Source abstract
Abstract
Abstract Thermal spray technology, a versatile coating technique, significantly impacts diverse industries and is pivotal in modern manufacturing processes. Like other technologies, it must continuously evolve to address new challenges and market demands. In this context, “hybrid thermal spraying” utilizing distinct feedstocks (such as powders, wire, suspensions, and solution precursors) offers a novel pathway to conveniently combine dissimilar materials at very different length scales to realize coatings with unique properties and enhanced performance. This approach seamlessly integrates into all thermal spray techniques. Introducing two or more distinct feedstocks simultaneously or sequentially with independent control over each can deposit coatings with varied architectures and novel microstructures. The present-day industry constantly demands enhanced performance and longevity of established wear-resistant coatings, thermal barrier coatings (TBCs), etc., and novel functionalities for emerging fields such as batteries. Hybrid thermal spray can potentially address these needs by elegantly combining established material systems with additional constituents. This review discusses the different variants of hybrid thermal spraying, and their relevance to practical applications is explored based on a comprehensive assessment of available literature. This review is intended to serve as a bridge between traditional and innovative approaches for inspiring further research to harness the advantages of hybrid thermal spray processes gainfully. It also discusses the challenges and limitations associated with this approach.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Flame retardant materials and properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. JR Davis, “Handbook of Thermal Spray Technology,” ASM international, 2004.
2. A. Vardelle, C. Moreau, J. Akedo, H. Ashrafizadeh, C.C. Berndt, J.O. Berghaus, M. Boulos, J. Brogan, A.C. Bourtsalas, A. Dolatabadi, M. Dorfman, T.J. Eden, P. Fauchais, G. Fisher, F. Gaertner, M. Gindrat, R. Henne, M. Hyland, E. Irissou, E.H. Jordan, K.A. Khor, A. Killinger, Y.-C. Lau, C.-J. Li, L. Li, J. Longtin, N. Markocsan, P.J. Masset, J. Matejicek, and G. Mauer et al., The 2016 Thermal Spray Roadmap, J. Therm. Spray Technol., 2016, 25(8), p 1376–1440.10.1007/s11666-016-0473-x ↗
3. H. Herman, S. Sampath, and R. McCune, Thermal Spray: Current Status and Future Trends, MRS Bull., 2000, 25(7), p 17–25.10.1557/mrs2000.119 ↗
4. J. Robert and C. Tucker, “ASM Handbook, Volume 5A: Thermal Spray Technology,” ASM international, 2013.
5. G. Antou, G. Montavon, F. Hlawka, A. Cornet, C. Coddet, and F. Machi, Modification of Thermal Barrier Coating Architecture by in Situ Laser Remelting, J. Eur. Ceram. Soc., 2006, 26(16), p 3583–3597.10.1016/j.jeurceramsoc.2006.01.003 ↗
6. K.A. Khor and N.L. Loh, Hot Isostatic Pressing of Plasma Sprayed Thermal Barrier Coating Systems, Mater. Manuf. Processes, 1995, 10(6), p 1241–1256.10.1080/10426919508935105 ↗
7. M. Buchtík, M. Hasoňová, P. Horník, M. Březina, L. Doskočil, J. Másilko, L. Mrňa, J. Filipenský, I. Kuběna, S. Fintová, J. Wasserbauer, and P. Doležal, Influence of Laser Remelting on the Microstructure and Corrosion Behavior of HVOF-Sprayed Fe-Based Coatings on Magnesium Alloy, Mater Charact, 2022, 194, 112343.10.1016/j.matchar.2022.112343 ↗
8. H. Xu and H. Huang, Microstructure Evolution and Mechanical Properties of Thermally Sprayed Coating Modified by Laser Remelting and Injection with Tungsten Carbide, Ceram. Int., 2022, 48(16), p 22854–22868.10.1016/j.ceramint.2022.04.189 ↗
9. A. Eskandari, A. Shafyei, F. Sayyedan, M. Afsous, and M. Adamzadeh, Investigating the Microstructural, Mechanical, and Tribological Properties of NiCrBSi High-Velocity Oxygen Fuel and High-Pressure High-Velocity Oxygen Fuel Coatings, J. Mater. Eng. Perform., 2023, 32(4), p 1671–1682.10.1007/s11665-022-07249-7 ↗
10. H. Na, G. Bae, K. Kang, H. Kim, J.J. Kim, and C. Lee, Effect of Thermally Softened Bronze Matrix on the Fracturing Behavior of Diamond Particles in Hybrid Sprayed Bronze/Diamond Composite, J. Therm. Spray Technol., 2010, 19(5), p 902–910.10.1007/s11666-010-9504-1 ↗
11. D. Kosikowski, J. Stanisic, T. Ostrom, and P.S. Mohanty, “Design and Characterization of a Simulated Environment Erosion Test Bed,” B.R. Marple, M.M. Hyland, Y.-C. Lau, R.S. Lima, and J. Voyer, Eds., 2006, p 1113–1118.10.31399/asm.cp.itsc2006p1113 ↗
12. P.S. Mohanty, A.D. Roche, R.K. Guduru, and V. Varadaraajan, Ultrafine Particulate Dispersed High-temperature Coatings by Hybrid Spray Process, J. Thermal Spray Technol., 2010, 19, p 484–494.10.1007/s11666-009-9413-3 ↗
13. V. Varadaraajan, R.K. Guduru, and P.S. Mohanty, Synthesis and Microstructural Evolution of Amorphous/Nanocrystalline Steel Coatings by Different Thermal-Spray Processes, J. Therm. Spray Technol., 2013, 22(4), p 452–462.10.1007/s11666-013-9885-z ↗
14. D. Tejero-Martin, M. Rezvani Rad, A. McDonald, and T. Hussain, Beyond Traditional Coatings: A Review on Thermal-sprayed Functional and Smart Coatings, J. Therm. Spray Technol., 2019, 28(4), p 598–644.10.1007/s11666-019-00857-1 ↗
15. R.S. Lima, C. Moreau, and B.R. Marple, HVOF-Sprayed Coatings Engineered from Mixtures of Nanostructured and Submicron Al2O3-TiO2 Powders: An Enhanced Wear Performance, J. Therm. Spray Technol., 2007, 16(5–6), p 866–872. https://doi.org/10.1007/s11666-007-9092-x10.1007/s11666-007-9092-x ↗
16. R.S. Lima and B.R. Marple, Thermal Spray Coatings Engineered from Nanostructured Ceramic Agglomerated Powders for Structural, Thermal Barrier and Biomedical Applications: A Review, Journal of Thermal Spray Technology, 2007, 16(1), p 40–63.
17. S. Al-Mutairi, M.S.J. Hashmi, B.S. Yilbas, and J. Stokes, Microstructural Characterization of HVOF/Plasma Thermal Spray of Micro/Nano WC–12%Co Powders, Surf. Coat. Technol., 2015, 264, p 175–186.10.1016/j.surfcoat.2014.12.050 ↗
18. D.J. Woo, B. Sneed, F. Peerally, F.C. Heer, L.N. Brewer, J.P. Hooper, and S. Osswald, Synthesis of Nanodiamond-Reinforced Aluminum Metal Composite Powders and Coatings Using High-Energy Ball Milling and Cold Spray, Carbon N Y, 2013, 63, p 404–415.10.1016/j.carbon.2013.07.001 ↗
19. P. Fauchais, G. Montavon, and G. Bertrand, From Powders to Thermally Sprayed Coatings, J. Therm. Spray Technol., 2010, 19(1–2), p 56–80.10.1007/s11666-009-9435-x ↗
20. A. Lohia, G. Sivakumar, M. Ramakrishna, and S.V. Joshi, Deposition of Nanocomposite Coatings Employing a Hybrid APS + SPPS Technique, Journal of Thermal Spray Technology, Springer Science and Business Media, LLC, 2014, 23(7), p 1054–1064.10.1007/s11666-014-0071-8 ↗
21. S. V. Joshi and G. Sivakumar, “Hybrid Processing with Powders and Solutions: A Novel Approach to Deposit Composite Coatings,” Journal of Thermal Spray Technology, Springer New York LLC, 2015, p 1166–1186.10.1007/s11666-015-0262-y ↗
22. S.V. Joshi, G. Sivakumar, T. Raghuveer, and R.O. Dusane, Hybrid Plasma-Sprayed Thermal Barrier Coatings Using Powder and Solution Precursor Feedstock, J. Thermal Spray Technol., 2014, 23(4), p 616–624. https://doi.org/10.1007/s11666-014-0075-410.1007/s11666-014-0075-4 ↗
23. F. Cipri, F. Marra, G. Pulci, J. Tirillò, C. Bartuli, and T. Valente, Plasma Sprayed Composite Coatings Obtained by Liquid Injection of Secondary Phases, Surf. Coat. Technol., 2009, 203(15), p 2116–2124.10.1016/j.surfcoat.2008.09.029 ↗
24. G. Sivakumar and S. V. Joshi, Composite Coatings Employing a Novel Hybrid Powder and Solution-Based Plasma Spray Technique for Tribological Applications, Thermal Sprayed Coatings and their Tribological Performances, IGI Global, n.d., p 61–87.10.4018/978-1-4666-7489-9.ch003 ↗
25. L. Łatka, L. Pawłowski, M. Winnicki, P. Sokołowski, A. Małachowska, and S. Kozerski, “Review of Functionally Graded Thermal Sprayed Coatings,” Applied Sciences (Switzerland), MDPI AG, 2020.10.3390/app10155153 ↗
26. S. Björklund, S. Goel, and S. Joshi, Function-Dependent Coating Architectures by Hybrid Powder-Suspension Plasma Spraying: Injector Design, Process. Concept Validation, Mater Des, Elsevier Ltd, 2018, 142, p 56–65.
27. S. Joshi, “Special Issue: Advances in Thermal Spray Technology,” Materials, MDPI AG, 2020.10.3390/ma13163521 ↗
28. S. Joshi and P. Nylen, “Advanced Coatings by Thermal Spray Processes,” Technologies, MDPI, 2019.10.3390/technologies7040079 ↗
29. E.J. Gildersleeve and R. Vaßen, Thermally Sprayed Functional Coatings and Multilayers: A Selection of Historical Applications and Potential Pathways for Future Innovation, J. Therm. Spray Technol., 2023, 32(4), p 778–817.10.1007/s11666-023-01587-1 ↗
30. M. Sathish, N. Radhika, and B. Saleh, Duplex and Composite Coatings: A Thematic Review on Thermal Spray Techniques and Applications, Met. Mater. Int., 2023, 29(5), p 1229–1297.10.1007/s12540-022-01302-9 ↗
31. J. Henao, M.A. Rivera-Gil, C.A. Poblano-Salas, D.G. Espinosa-Arbelaez, L.G. Trapaga-Martinez, O.S. Mazon, and J.C. Castuera, Multilayered Coatings by Thermal Spray for High-Temperature Applications, 2024, p 179–212.10.1007/978-3-031-40809-0_6 ↗
32. P.G. Lashmi, P.V. Ananthapadmanabhan, G. Unnikrishnan, and S.T. Aruna, Present Status and Future Prospects of Plasma Sprayed Multilayered Thermal Barrier Coating Systems, J. Eur. Ceram. Soc., 2020, 40(8), p 2731–2745.10.1016/j.jeurceramsoc.2020.03.016 ↗
33. P. Das, S. Paul, and P.P. Bandyopadhyay, Preparation of Diamond Reinforced Metal Powders as Thermal Spray Feedstock Using Ball Milling, Surf. Coat. Technol., 2016, 286, p 165–171.10.1016/j.surfcoat.2015.12.022 ↗
34. G. Bolelli, A. Candeli, L. Lusvarghi, A. Ravaux, K. Cazes, A. Denoirjean, S. Valette, C. Chazelas, E. Meillot, and L. Bianchi, Tribology of NiCrAlY+Al2O3 Composite Coatings by Plasma Spraying with Hybrid Feeding of Dry Powder+suspension, Wear, Elsevier Ltd, 2015, 344–345, p 69–85.
35. V. Cannillo, L. Lusvarghi, and A. Sola, Production and Characterization of Plasma-Sprayed TiO2-Hydroxyapatite Functionally Graded Coatings, J. Eur. Ceram. Soc., 2008, 28(11), p 2161–2169.10.1016/j.jeurceramsoc.2008.02.026 ↗
36. J. Wilden, J.P. Bergmann, S. Jahn, S. Reich, S. Knapp, F. van Rodijnen, and G. Fischer, “A New Method for the Production of Particle Reinforced Coatings,” B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, and G. Montavon, Eds., 2007, p 359–364.10.31399/asm.cp.itsc2007p0359 ↗
37. J. Kiilakoski, J. Puranen, E. Heinonen, H. Koivuluoto, and P. Vuoristo, Characterization of Powder-Precursor HVOF-Sprayed Al2O3-YSZ/ZrO2 Coatings, J. Thermal Spray Technol., Springer, New York LLC, 2019, 28(1–2), p 98–107.10.1007/s11666-018-0816-x ↗
38. A. Ganvir, A.R. Jahagirdar, A. Mulone, L. Örnfeldt, S. Björklund, U. Klement, and S. Joshi, Novel Utilization of Liquid Feedstock in High Velocity Air Fuel (HVAF) Spraying to Deposit Solid Lubricant Reinforced Wear Resistant Coatings, J Mater Process Technol, Elsevier Ltd, 2021, 295.10.1016/j.jmatprotec.2021.117203 ↗
39. J.O. Berghaus, B. Marple, and C. Moreau, Suspension Plasma Spraying of Nanostructured WC-12Co Coatings, J. Therm. Spray Technol., 2006, 15(4), p 676–681.10.1361/105996306X147072 ↗
40. P. Fauchais, V. Rat, J.-F. Coudert, R. Etchart-Salas, and G. Montavon, Operating Parameters for Suspension and Solution Plasma-Spray Coatings, Surf. Coat. Technol., 2008, 202(18), p 4309–4317.10.1016/j.surfcoat.2008.04.003 ↗
41. H. Kassner, R. Siegert, D. Hathiramani, R. Vassen, and D. Stoever, Application of Suspension Plasma Spraying (SPS) for Manufacture of Ceramic Coatings, J. Therm. Spray Technol., 2008, 17(1), p 115–123.10.1007/s11666-007-9144-2 ↗
42. R. Vaßen, H. Kaßner, G. Mauer, and D. Stöver, Suspension Plasma Spraying: Process Characteristics and Applications, J. Therm. Spray Technol., 2010, 19(1–2), p 219–225.10.1007/s11666-009-9451-x ↗
43. G. Bertolissi, C. Chazelas, G. Bolelli, L. Lusvarghi, M. Vardelle, and A. Vardelle, Engineering the Microstructure of Solution Precursor Plasma-Sprayed Coatings, J. Therm. Spray Technol., 2012, 21(6), p 1148–1162.10.1007/s11666-012-9789-3 ↗
44. A. Joulia, G. Bolelli, E. Gualtieri, L. Lusvarghi, S. Valeri, M. Vardelle, S. Rossignol, and A. Vardelle, Comparing the Deposition Mechanisms in Suspension Plasma Spray (SPS) and Solution Precursor Plasma Spray (SPPS) Deposition of Yttria-Stabilised Zirconia (YSZ), J. Eur. Ceram. Soc., 2014, 34(15), p 3925–3940.10.1016/j.jeurceramsoc.2014.05.024 ↗
45. G. Sivakumar, R.O. Dusane, and S.V. Joshi, A Novel Approach to Process Phase Pure α-Al2O3 Coatings by Solution Precursor Plasma Spraying, J. Eur. Ceram. Soc., 2013, 33(13–14), p 2823–2829.10.1016/j.jeurceramsoc.2013.05.005 ↗
46. P. Fauchais, M. Vardelle, S. Goutier, and A. Vardelle, Key Challenges and Opportunities in Suspension and Solution Plasma Spraying, Plasma Chem. Plasma Process., 2015, 35(3), p 511–525.10.1007/s11090-014-9594-5 ↗
47. E.H. Jordan, C. Jiang, and M. Gell, The Solution Precursor Plasma Spray (SPPS) Process: A Review with Energy Considerations, J. Therm. Spray Technol., 2015, 24(7), p 1153–1165.10.1007/s11666-015-0272-9 ↗
48. S. Mahade, S. Björklund, S. Govindarajan, M. Olsson, and S. Joshi, Novel Wear Resistant Carbide-Laden Coatings Deposited by Powder-Suspension Hybrid Plasma Spray: Characterization and Testing, Surf. Coat. Technol., 2020, 399, 126147.10.1016/j.surfcoat.2020.126147 ↗
49. J.W. Murray, A.S.M. Ang, Z. Pala, E.C. Shaw, and T. Hussain, Suspension High Velocity Oxy-Fuel (SHVOF)-Sprayed Alumina Coatings: Microstructure, Nanoindentation and Wear, J. Therm. Spray Technol., 2016, 25(8), p 1700–1710.10.1007/s11666-016-0462-0 ↗
50. G. Mittal and S. Paul, Suspension and Solution Precursor Plasma and HVOF Spray: A Review, J. Therm. Spray Technol., 2022, 31(5), p 1443–1475.10.1007/s11666-022-01360-w ↗
51. S. Chadha, R. Jefferson-Loveday, F. Venturi, and T. Hussain, A Computational and Experimental Investigation into Radial Injection for Suspension High Velocity Oxy-Fuel (SHVOF) Thermal Spray, J. Therm. Spray Technol., 2019, 28(6), p 1126–1145.10.1007/s11666-019-00888-8 ↗
52. K. Anusha, B.C. Routara, and S. Guha, A Review on High-Velocity Oxy-Fuel (HVOF) Coating Technique, J. Inst. Eng. (India): Series D, 2023, 104(2), p 831–848. https://doi.org/10.1007/s40033-022-00434-x10.1007/s40033-022-00434-x ↗
53. A. Meghwal, A. Anupam, M. Boschen, S. Singh, S. Björklund, S. Joshi, P. Munroe, C.C. Berndt, and A.S.M. Ang, Novel Al2CoCrFeNi High-Entropy Alloy Coating Produced Using Suspension High Velocity Air Fuel (SHVAF) Spraying, Intermetallics (Barking), 2023, 163, 108057.10.1016/j.intermet.2023.108057 ↗
54. L. Pawlowski, Suspension and Solution Thermal Spray Coatings, Surf. Coat. Technol., 2009, 203(19), p 2807–2829.10.1016/j.surfcoat.2009.03.005 ↗
55. A. Ganvir, S. Goel, S. Govindarajan, A.R. Jahagirdar, S. Björklund, U. Klement, and S. Joshi, Tribological Performance Assessment of Al2O3-YSZ Composite Coatings Deposited by Hybrid Powder-Suspension Plasma Spraying, Surf. Coat. Technol., 2021, 409, p 126907. https://doi.org/10.1016/j.surfcoat.2021.12690710.1016/j.surfcoat.2021.126907 ↗
56. S. Mahade, A. Mulone, S. Björklund, U. Klement, and S. Joshi, Novel Suspension Route to Incorporate Graphene Nano-Platelets in HVAF-Sprayed Cr3C2–NiCr Coatings for Superior Wear Performance, J. Mater. Res. Technol., Elsevier Editora Ltda, 2021, 13, p 498–512.10.1016/j.jmrt.2021.04.096 ↗
57. S. Mahade, L. Baiamonte, E. Sadeghimeresht, S. Björklund, F. Marra, and S. Joshi, Novel Utilization of Powder-Suspension Hybrid Feedstock in HVAF Spraying to Deposit Improved Wear and Corrosion Resistant Coatings, Surf. Coatings Technol., 2021, 412, p 127015. https://doi.org/10.1016/j.surfcoat.2021.12701510.1016/j.surfcoat.2021.127015 ↗
58. B. Bhushan and P.L. Ko, Introduction to Tribology, Appl. Mech. Rev., 2003, 56(1), p B6–B7.10.1115/1.1523360 ↗
59. K. Torkashvand, A.I. Encalada, B.C.N.M. de Castilho, M. Gupta, R. Chromik, and S. Joshi, High-Temperature Sliding Wear Performance of HVAF Sprayed WC-Based Coatings with Alternative Binders, Wear, 2024, 538–539, 205206.10.1016/j.wear.2023.205206 ↗
60. K. Torkashvand, S. Joshi, and M. Gupta, Advances in Thermally Sprayed WC-Based Wear-Resistant Coatings: Co-Free Binders, Processing Routes and Tribological Behavior, J. Therm. Spray Technol., 2022, 31(3), p 342–377.10.1007/s11666-022-01358-4 ↗
61. S.A. Galedari, A. Mahdavi, F. Azarmi, Y. Huang, and A. McDonald, A Comprehensive Review of Corrosion Resistance of Thermally-Sprayed and Thermally-Diffused Protective Coatings on Steel Structures, J. Therm. Spray Technol., 2019, 28(4), p 645–677.10.1007/s11666-019-00855-3 ↗
62. V. Lakkannavar, K.B. Yogesha, C.D. Prasad, M. Mruthunjaya, and R. Suresh, A Review on Tribological and Corrosion Behaviour of Thermal Spray Coatings, J. Inst. Eng., 2024 https://doi.org/10.1007/s40033-024-00636-510.1007/s40033-024-00636-5 ↗
63. R.B. Nair, G. Perumal, and A. McDonald, Effect of Microstructure on Wear and Corrosion Performance of Thermally Sprayed AlCoCrFeMo High-Entropy Alloy Coatings, Adv. Eng. Mater., 2022, 24(9), p 2101713.10.1002/adem.202101713 ↗
64. E. Sadeghi, N. Markocsan, and S. Joshi, Advances in Corrosion-Resistant Thermal Spray Coatings for Renewable Energy Power Plants, Part I: Effect Composition Microstruct. J. Thermal Spray Technol., 2019, 28(8), p 1749–1788.
65. L. Marcinauskas, J.S. Mathew, M. Milieška, M. Aikas, and M. Kalin, Influence of Graphite Content on the Tribological Properties of Plasma Sprayed Alumina-Graphite Coatings, Surf. Interfaces, 2023, 38, 102763.10.1016/j.surfin.2023.102763 ↗
66. T. Tesar, R. Musalek, J. Medricky, J. Kotlan, F. Lukac, Z. Pala, P. Ctibor, T. Chraska, S. Houdkova, V. Rimal, and N. Curry, Development of Suspension Plasma Sprayed Alumina Coatings with High Enthalpy Plasma Torch, Surf. Coat. Technol., 2017, 325, p 277–288.10.1016/j.surfcoat.2017.06.039 ↗
67. O. Ali, R. Ahmed, F.-L. Toma, L.-M. Berger, B. Matthey, N. Faisal, and K. Ahmed, Influence of Feedstock and Thermal Spray Process on the Phase Composition of Alumina Coatings and Their Sliding Wear, J. Therm. Spray Technol., 2023, 32(7), p 2028–2053.10.1007/s11666-023-01597-z ↗
68. J. Voyer and B.R. Marple, Tribological Performance of Thermally Sprayed Cermet Coatings Containing Solid Lubricants, Surf. Coat. Technol., 2000, 127(2–3), p 155–166.10.1016/S0257-8972(00)00667-8 ↗
69. W. Żórawski, R. Chatys, N. Radek, and J. Borowiecka-Jamrozek, Plasma-Sprayed Composite Coatings with Reduced Friction Coefficient, Surf. Coat. Technol., 2008, 202(18), p 4578–4582.10.1016/j.surfcoat.2008.04.026 ↗
70. J. Pulsford, F. Venturi, S. Kamnis, and T. Hussain, Sliding Wear Behaviour of WC-Co Reinforced NiCrFeSiB HVOAF Thermal Spray Coatings against WC-Co and Al2O3 Counterbodies, Surf. Coat. Technol., 2020, 386, 125468.10.1016/j.surfcoat.2020.125468 ↗
71. J. Oberste Berghaus, J.G. Legoux, C. Moreau, F. Tarasi, and T. Chraska, Mechanical and Thermal Transport Properties of Suspension Thermal-Sprayed Alumina-Zirconia Composite Coatings, J. Thermal Spray Technol., 2008, 17, p 91–104.10.1007/s11666-007-9146-0 ↗
72. W. Li, J. Fan, Y. Fan, L. Xiao, and H. Cheng, MoSi2/(Mo, Ti)Si2 Dual-Phase Composite Coating for Oxidation Protection of Molybdenum Alloy, J. Alloys Compd., 2018, 740, p 711–718.10.1016/j.jallcom.2017.08.173 ↗
73. J.W. Murray, A. Leva, S. Joshi, and T. Hussain, Microstructure and Wear Behaviour of Powder and Suspension Hybrid Al2O3–YSZ Coatings, Ceram. Int., 2018, 44(7), p 8498–8504.10.1016/j.ceramint.2018.02.048 ↗
74. V. Gopal, S. Goel, G. Manivasagam, and S. Joshi, Performance of Hybrid Powder-Suspension Axial Plasma Sprayed Al2O3—YSZ Coatings in Bovine Serum Solution, Materials, 2019, 12(12), p 1922. https://doi.org/10.3390/ma1212192210.3390/ma12121922 ↗
75. T. Tesar, R. Musalek, J. Medricky, J. Cizek, F. Lukac, T. Chraska, and J. Dudik, “Hybrid Plasma Spraying —Discovering the Effects of Deposition Parameters,” Thermal Spray 2021: Proceedings from the International Thermal Spray Conference, ASM International, 2021, p 493–498.10.31399/asm.cp.itsc2021p0493 ↗
76. K. Torkashvand, M. Gupta, S. Björklund, F. Marra, L. Baiamonte, and S. Joshi, Influence of Nozzle Configuration and Particle Size on Characteristics and Sliding Wear Behaviour of HVAF-Sprayed WC-CoCr Coatings, Surf. Coat. Technol., 2021, 423, 127585.10.1016/j.surfcoat.2021.127585 ↗
77. K. Torkashvand, S. Joshi, V. Testa, F. Ghisoni, S. Morelli, G. Bolelli, L. Lusvarghi, F. Marra, and M. Gupta, Tribological Behavior of HVAF-Sprayed WC-Based Coatings with Alternative Binders, Surf. Coat. Technol., 2022, 436, 128296.10.1016/j.surfcoat.2022.128296 ↗
78. K. Torkashvand, M. Gupta, S. Björklund, and S. Joshi, Tribological Performance of Thin HVAF-Sprayed WC-CoCr Coatings Fabricated Employing Fine Powder Feedstock, J. Therm. Spray Technol., 2023, 32(4), p 1033–1046.10.1007/s11666-022-01506-w ↗
79. S.F. Wayne and S. Sampath, Structure/Property Relationships in Sintered and Thermally Sprayed WC-Co, J. Therm. Spray Technol., 1992, 1(4), p 307–315.10.1007/BF02647158 ↗
80. N. Espallargas, J. Berget, J.M. Guilemany, A.V. Benedetti, and P.H. Suegama, Cr3C2–NiCr and WC–Ni Thermal Spray Coatings as Alternatives to Hard Chromium for Erosion-Corrosion Resistance, Surf. Coat. Technol., 2008, 202(8), p 1405–1417.10.1016/j.surfcoat.2007.06.048 ↗
81. S. Matthews, B. James, and M. Hyland, High Temperature Erosion of Cr3C2-NiCr Thermal Spray Coatings — The Role of Phase Microstructure, Surf. Coat. Technol., 2009, 203(9), p 1144–1153.10.1016/j.surfcoat.2008.10.008 ↗
82. L. Lin, G.-L. Li, H.-D. Wang, J.-J. Kang, Z.-L. Xu, and H.-J. Wang, Structure and Wear Behavior of NiCr–Cr3C2 Coatings Sprayed by Supersonic Plasma Spraying and High Velocity Oxy-Fuel Technologies, Appl. Surf. Sci., 2015, 356, p 383–390.10.1016/j.apsusc.2015.08.019 ↗
83. S. Matthews, B. James, and M. Hyland, The Role of Microstructure in the Mechanism of High Velocity Erosion of Cr3C2–NiCr Thermal Spray Coatings: Part 1 — As-Sprayed Coatings, Surf. Coat. Technol., 2009, 203(8), p 1086–1093.10.1016/j.surfcoat.2008.10.005 ↗
84. S. Matthews, M. Hyland, and B. James, Microhardness Variation in Relation to Carbide Development in Heat Treated Cr3C2–NiCr Thermal Spray Coatings, Acta Mater., 2003, 51(14), p 4267–4277.10.1016/S1359-6454(03)00254-4 ↗
85. K. Derelizade, F. Venturi, R.G. Wellman, A. Kholobysov, and T. Hussain, Wear Performance of Graphene Nano Platelets Incorporated WC-Co Coatings Deposited by Hybrid High Velocity Oxy Fuel Thermal Spray, Wear, Elsevier Ltd, 2021, 482–483.10.1016/j.wear.2021.203974 ↗
86. H. Memon, A. Rincón Romero, K. Derelizade, F. Venturi, and T. Hussain, A New Hybrid Suspension and Solution Precursor Thermal Spray for Wear-Resistant Silicon Carbide Composite Coatings, Mater Des, Elsevier Ltd, 2022, 224.10.1016/j.matdes.2022.111382 ↗
87. G. Bolelli, A. Candeli, L. Lusvarghi, T. Manfredini, A. Denoirjean, S. Valette, A. Ravaux, and E. Meillot, “Hybrid” Plasma Spraying of NiCrAlY+Al 2 O 3 + h -BN Composite Coatings for Sliding Wear Applications, Wear, 2017, 378–379, p 68–81.10.1016/j.wear.2017.02.027 ↗
88. H. Hu, L. Mao, S. Yin, H. Liao, and C. Zhang, Wear-Resistant Ceramic Coatings Deposited by Liquid Thermal Spraying, Ceram Int, Elsevier Ltd, 2022, 48(22), p 33245–33255.10.1016/j.ceramint.2022.07.267 ↗
89. M. Mistri, S. Joshi, K.K. Kar, and K. Balani, Tribomechanical Insight into Carbide-Laden Hybrid Suspension-Powder Plasma-Sprayed Tribaloy T400 Composite Coatings, Surf Coat Technol, Elsevier B.V., 2020, 396.10.1016/j.surfcoat.2020.125957 ↗
90. V. Testa, S. Morelli, G. Bolelli, L. Lusvarghi, S. Björklund, and S. Joshi, Micromechanical Behaviour and Wear Resistance of Hybrid Plasma-Sprayed TiC Reinforced Tribaloy-400, Surf Coat Technol, Elsevier B.V., 2021, 425.10.1016/j.surfcoat.2021.127682 ↗
91. W. Tillmann, L. Hagen, and D. Kokalj, Embedment of Eutectic Tungsten Carbides in Arc Sprayed Steel Coatings, Surf. Coat. Technol., 2017, 331, p 153–162.10.1016/j.surfcoat.2017.10.044 ↗
92. W. Tillmann, M. Abdulgader, and L. Hagen, “External Powder Injection in Twin Wire Arc Spraying to Control the Coating Composition,” R.S. Lima, A. Agarwal, M.M. Hyland, Y.-C. Lau, G. Mauer, A. McDonald, and F.-L. Toma, Eds., 2013, p 532–537.10.31399/asm.cp.itsc2013p0532 ↗
93. W. Uczak de Goes, N. Markocsan, and M. Gupta, Microstructural Changes in Suspension Plasma-Sprayed TBCs Deposited on Complex Geometry Substrates, Coatings, 2020, 10(7), p 699.10.3390/coatings10070699 ↗
94. W.W. Zhang, G.R. Li, Q. Zhang, G.J. Yang, G.W. Zhang, and H.M. Mu, Bimodal TBCs with Low Thermal Conductivity Deposited by a Powder-Suspension Co-Spray Process, J Mater Sci Technol, Chinese Society of Metals, 2018, 34(8), p 1293–1304.10.1016/j.jmst.2017.11.052 ↗
95. R.A. Miller, Current Status of Thermal Barrier Coatings — An Overview, Surf. Coat. Technol., 1987, 30(1), p 1–11.10.1016/0257-8972(87)90003-X ↗
96. J.G. Thakare, C. Pandey, M.M. Mahapatra, and R.S. Mulik, Thermal Barrier Coatings—A State of the Art Review, Met. Mater. Int., 2021, 27(7), p 1947–1968.10.1007/s12540-020-00705-w ↗
97. A. Ganvir, N. Curry, S. Govindarajan, and N. Markocsan, Characterization of Thermal Barrier Coatings Produced by Various Thermal Spray Techniques Using Solid Powder, Suspension, and Solution Precursor Feedstock Material, Int J Appl Ceram Technol, 2016, 13(2), p 324–332.
98. C. Jiang, D. Cietek, R. Kumar, and E.H. Jordan, Ytterbium Silicate Environmental Barrier Coatings Deposited Using the Solution-Based Precursor Plasma Spray, J. Therm. Spray Technol., 2020, 29(5), p 979–994.10.1007/s11666-020-01046-1 ↗
99. A. Ajay, V.S. Raja, G. Sivakumar, and S.V. Joshi, Hot Corrosion Behavior of Solution Precursor and Atmospheric Plasma Sprayed Thermal Barrier Coatings, Corros. Sci., 2015, 98, p 271–279.10.1016/j.corsci.2015.05.034 ↗
100. M. Gell, E.H. Jordan, M. Teicholz, B.M. Cetegen, N.P. Padture, L. Xie, D. Chen, X. Ma, and J. Roth, Thermal Barrier Coatings Made by the Solution Precursor Plasma Spray Process, J. Therm. Spray Technol., 2008, 17(1), p 124–135.10.1007/s11666-007-9141-5 ↗