Numerical and Experimental Investigation of Cold Spray Gas Dynamic Effects for Polymer Coating
Source abstract
Abstract
Low melting temperature materials such as polymers are known to be difficult to deposit using traditional cold spray techniques. Computational fluid dynamics (CFD) models were created for various nozzle geometries and flow conditions. A schlieren optical system was used to visualize the density gradients and flow characteristics in the free jet impingement region. Based on the CFD models, it was determined that a diffuser placed into the carrier gas flow near the nozzle exit not only leads to lower particle impact velocity required for polymer deposition, but also provides for appropriate application of compression heating of the particles to produce the conditions necessary at impact for successful coating adhesion of these materials. Experiments subsequently confirmed the successful deposition of polyethylene powder onto a 7075-T6 aluminum substrate. Using air as the carrier gas, polyethylene particles of 53-75 μm diameter and 0.94 g/cm3 density, were cold spray deposited onto the aluminum substrate, with a critical impact velocity of 191 m/s. No apparent melting of the polymer particles was observed. Refinements to these concepts are currently under investigation and a patent disclosure for the idea is pending.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Fluid Dynamics and Heat Transfer · Particle Dynamics in Fluid Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. A.P. Alkhimov, A.N. Papyrin, V.F. Kosarev, N.I. Nesterovich, and M.M. Shushpanov, Gas Dynamic Spraying Method for Applying a Coating, U.S. Patent 5,302,414, 1994
2. A. Papyrin, V. Kosarev, S. Klinkov, A. Alkhimov, and V. Fomin, Cold Spray Technology, 1st ed., Elsevier, Moscow, Russia, 2007
3. T. Stoltenhoff, H. Kreye, H.J. Richter, and H. Assadi, Optimization of the Cold Spray Process, Thermal Spray, 2001, p 409-41610.31399/asm.cp.itsc2001p0409 ↗
4. W.-Y. Li and C.-J. Li, Optimal Design of a Novel Cold Spray Gun Nozzle at a Limited Space, Therm. Spray Technol., 2004, 14, p 391-39610.1361/105996305X59404 ↗
5. H. Katanoda, M. Fukuhara, and N. Iino, Numerical Study of Combination Parameters for Particle Impact Velocity and Temperature in Cold Spray, Therm. Spray Technol., 2007, 16, p 627-63310.1007/s11666-007-9087-7 ↗
6. T. Han, Z. Zhao, B.A. Gillispie, and J.R. Smith, Effects of Spray Condition on Coating Formation by Kinetic Spray Process, Therm. Spray Technol., 2004, 14, p 373-38310.1361/105996305X59369 ↗
7. W.-Y. Li, H. Liao, H.-T. Wang, C.-J. Li, G. Zhang, and C. Coddet, Optimal Design of a Convergent-Barrel Cold Spray Nozzle by Numerical Method, Appl. Surf. Sci., 2005, 253, p 708-71310.1016/j.apsusc.2005.12.157 ↗
8. Y. Xu and I.M. Hutchings, Cold Spray Deposition of Thermoplastic Powder, Surf. Coat. Technol., 2006, 201(6), p 3044-305010.1016/j.surfcoat.2006.06.016 ↗
9. A. Alhulaifi, “Numerical and Experimental Investigation of Cold Spray Gas Dynamic Effects for Polymer Coating,” Master thesis, South Dakota School of Mines and Technology, 2008
10. P.H. Oosthuizen and W.E. Carscallen, Compressible Fluid Flow, McGraw-Hill, New York, 1997, p 54-73
11. B. Samareh, O. Stier, V. Luthen, and A. Dolatabadi, Assessment of CFD Modeling via Flow Visualization in Cold Spray Process, Therm. Spray Technol., 2009, 18, p 934-94310.1007/s11666-009-9363-9 ↗
12. D. Helfritch and V. Champagne, Optimal Particle for the Cold Spray Process, U.S. Army Research Laboratory, Aberdeen Proving Ground, MD, 200610.31399/asm.cp.itsc2006p0103 ↗
13. H. Fukanuma and N. Ohno, Study of Adhesive Strength of Cold Spray Coatings, Thermal Spray, 200410.31399/asm.cp.itsc2004p0329 ↗
14. Portable Supersonic Spray Machine Operating Manuals, Document # SST-PBS-PM-P-1.0-0605, June 2005
15. T. Schmidt, F. Gärtner, H. Assadi, and H. Kreye, Development of a Generalized Parameter Window for Cold spray Deposition, Acta Mater., 2006, 56(3), p 729-74210.1016/j.actamat.2005.10.005 ↗
16. H. Assadi, F. Gärtner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 15(15), p 4379-439410.1016/S1359-6454(03)00274-X ↗
17. M. Karimi, A. Fartaj, G. Rankin, D. Vanderzwet, W. Birtch, and J. Villafuerte, Numerical Simulation of the Cold Gas Dynamic Spray Process, J. Therm. Spray Technol., 2006, 15, p 518-52310.1361/105996306X146866 ↗