Pre-/During-/Post-Laser Processes to Enhance the Adhesion and Mechanical Properties of Thermal-Sprayed Coatings with a Reduced Environmental Impact
Source abstract
Abstract
Lasers have been used to improve the ultimate performance of thermal spray coatings for specific applications, but the full potential of additional laser treatments must be further explored. Laser treatments (auxiliary processes) can be applied before, during or after thermal spraying (main process), leading to a wide range of coating improvements (microstructure, adhesion, etc.). The aim of this review is to introduce the most significant laser treatments for thermal spray applications. The potential improvements for thermal spray coatings are illustrated by a selection of representative research cases. Laser pretreatments (ablation and texturing) promote coating/substrate adhesion and are suitable to prepare the surface of sensitive substrates such as aluminum, titanium, or magnesium alloys. The use of these techniques, which leads to several benefits such as surfaces free of grit-particle inclusions, directly improves the quality of coatings. Laser treatments applied simultaneously during the spraying process deeply modify the coatings microstructure. These hybrid technologies allow in situ laser melting of coatings, resulting in improved mechanical properties and enhanced wear and corrosion behaviors. Finally, laser posttreatments can improve coatings density and adhesion, and also induce phase transformations and structure refinement. As a summary, laser treatments seem particularly promising for improving the thermal spray coating microstructure and the coating/substrate adhesion. In addition, they offer a more environmentally friendly alternative to the conventional surface preparation treatments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Tribology and Lubrication Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. T.J. Steeper, A.J. Rotolico, J.E. Nerz, W.L. Riggs, D.J. Varacalle, and G.C. Wilson, Optimizing Plasma Spraying Alumina-Titania Coatings Using Statistical Methods, Thermal Spray Coatings: Research, Design and Applications, C.C. Berndt and T.F. Bernecki, Ed., ASM International, Anaheim, CA, 1993, p 37-48
2. R.B. Heimann, Plasma-Spray Coating: Principles and Applications, 2nd ed., Wiley-VCH, Weinheim, 2008
3. X.P. Jiang, X.Y. Wang, J.X. Li, D.Y. Li, C.-S. Man, M.J. Shepard, and T. Zhai, Enhancement of Fatigue and Corrosion Properties of Pure Ti by Sandblasting, Mater. Sci. Eng. A, 2006, 429(1-2), p 30-3510.1016/j.msea.2006.04.024 ↗
4. M. Multigner, E. Frutos, J.L. González-Carrasco, J.A. Jiménez, P. Marín, and J. Ibáñez, Influence of the Sandblasting on the Subsurface Microstructure of 316LVM Stainless Steel: Implications on the Magnetic and Mechanical Properties, Mater. Sci. Eng. C, 2009, 29(4), p 1357-136010.1016/j.msec.2008.11.002 ↗
5. C. Leinenbach and D. Eifler, Fatigue and Cyclic Deformation Behaviour of Surface-Modified Titanium Alloys in Simulated Physiological Media, Biomaterials, 2006, 27(8), p 1200-120810.1016/j.biomaterials.2005.08.012 ↗
6. M. Multigner, E. Frutos, C.L. Mera, J. Chao, and J.L. González-Carrasco, Interrogations on the Sub-Surface Strain Hardening of Grit Blasted Ti-6Al-4V Alloy, Surf. Coat. Technol., 2009, 203(14), p 2036-204010.1016/j.surfcoat.2009.02.003 ↗
7. E. Petavratzi, S. Kingman, and I. Lowndes, Particulates from Mining Operations: A Review of Sources, Effects and Regulations, Miner. Eng., 2005, 18(12), p 1183-119910.1016/j.mineng.2005.06.017 ↗
8. A. Chillman, M. Ramulu, and M. Hashish, Water Jet and Water-Air Jet Surface Processing of a Titanium Alloy: A Parametric Evaluation, J. Manuf. Sci. Eng., 2010, 132(1), 011012 (10 pp)10.1115/1.4000837 ↗
9. E. Uhlmann and A. El Mernissi, Pre-treatment by Dry Ice Blasting for Adhesive Bonding, Prod. Eng., 2008, 2(2), p 133-13810.1007/s11740-008-0087-3 ↗
10. C. Coddet, G. Montavon, S. Ayrault-Costil, O. Freneaux, F. Rigolet, G. Barbezat, F. Folio, A. Diard, and P. Wazen, Surface Preparation and Thermal Spray in a Single Step: The PROTAL Process—Example of Application for an Aluminum-Base Substrate, J. Therm. Spray Technol., 1999, 8(2), p 235-24210.1361/105996399770350467 ↗
11. “Laser Material Processing”, Centro Laser of Valenzano (BA), Promotional Literature, undated, http://www.centrolaser.it/en/lavorazioni.html , Accessed 31 October 2010
12. J. Cedelle, M. Vardelle, and P. Fauchais, Influence of Stainless Steel Substrate Preheating on Surface Topography and on Millimeter- and Micrometer-Sized Splat Formation, Surf. Coat. Technol., 2006, 201(3-4), p 1373-138210.1016/j.surfcoat.2006.02.003 ↗
13. C. Zhang, G. Zhang, V. Ji, H. Liao, S. Costil, and C. Coddet, Microstructure and Mechanical Properties of Flame-Sprayed PEEK Coating Remelted by Laser Process, Prog. Org. Coat., 2009, 66, p 248-25310.1016/j.porgcoat.2009.08.002 ↗
14. P. Laurens, B. Sadras, F. Decobert, F. Arefi, and J. Amouroux, Modifications of Polyether-Etherketone Surface After 193 nm and 248 nm Excimer Laser Radiation, Appl. Surf. Sci, 1999, 138-139, p 93-9610.1016/S0169-4332(98)00389-4 ↗
15. J.W. Dini, Laser Surface Modification Offers Promise for Various Coating Processes and Substrates, Met. Finish., 1997, 95(10), p 1010.1016/S0026-0576(97)80693-9 ↗
16. P.A. Molian, Structural Characterization of Laser-Processed Molybdenum Steel, Mater. Sci. Eng., 1983, 58(2), p 175-18010.1016/0025-5416(83)90043-5 ↗
17. D.H. Meadows, D.L. Meadows, J. Randers, and W. Behrens, The Limits to Growth, Universe Books, New York, 1972, p 205
18. “Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)” Regulation (EC) No 1907/2006, European Parliament and Council, December 2006
19. E.W. Brooman, Environmentally Preferred Alternatives to Cadmium Coatings for Electrical/Electronic Applications, Environmental Aspects of Electrochemical Technology: Applications in Electronics, M. Datta, J.M. Fenton, and E.W. Brooman, Ed., The Electrochemical Society, Pennington, 1997, p 219-238
20. C.G. Fink, Process of Electrodepositing Chromium and of Preparing Baths Therefor, U.S. Patent 1581188, 1926
21. B. Volesky and Z. Holan, Biosorption of Heavy-Metals, Biotechnol. Prog., 1995, 11(3), p 235-25010.1021/bp00033a001 ↗
22. V.K. Gupta, A.K. Shrivastawa, and N. Jain, Biosorption of Chromium (VI) from Aqueous Solutions by Green Algae Spirogyra Species, Water Res., 2001, 35(17), p 4079-408510.1016/S0043-1354(01)00138-5 ↗
23. T.A. Naguy, Alternative to Chromium Coatings: Wet Deposition Technologies, Proceedings of the Sur/Fin, Chicago, IL, 2004
24. E.W. Brooman, Alternatives to Chromium Coatings: dry Deposition Technologies, Proceedings of the Sur/Fin, Chicago, IL, 2004
25. G. Bolelli, Replacement of Hard Chromium Plating by Thermal Spraying—Problems, Solutions and Possible Future Approaches, Surf. Eng., 2009, 25(4), p 263-26910.1179/174329409X373729 ↗
26. K.O. Legg, M. Graham, P. Chang, F. Rastagar, A. Gonzales, and B. Sartwell, The Replacement of Electroplating, Surf. Coat. Technol., 1996, 81(1), p 99-10510.1016/0257-8972(95)02653-3 ↗
27. E.W. Brooman, Corrosion Performance of Environmentally Acceptable Alternatives to Cadmium and Chromium Coatings: Chromium—Part I, Met. Finish., 2000, 98(7), p 38-4310.1016/S0026-0576(00)82334-X ↗
28. E.W. Brooman, Corrosion Performance of Environmentally Acceptable Alternatives to Cadmium and Chromium Coatings: Chromium—Part II, Met. Finish., 2000, 98(8), p 39-4510.1016/S0026-0576(00)82740-3 ↗
29. L. Dubourg and J. Archambeault, Technological and Scientific Landscape of Laser Cladding Process in 2007, Surf. Coat. Technol., 2008, 202(24), p 5863-586910.1016/j.surfcoat.2008.06.122 ↗
30. C.P. Paul, H. Alemohammad, E. Toyserkani, A. Khajepour, and S. Corbin, Cladding of WC-12 Co on Low Carbon Steel Using a Pulsed Nd:YAG Laser, Mater. Sci. Eng. A, 2007, 464(1-2), p 170-17610.1016/j.msea.2007.01.132 ↗
31. A. Tukker, Life Cycle Assessment as a Tool in Environmental Impact Assessment, Environ. Impact Assess., 2000, 20(4), p 435-45610.1016/S0195-9255(99)00045-1 ↗
32. G. Montavon, A. Vardelle, N. Krishnan, P. Ulloa, S. Costil, and H. Liao, Life Cycle Assessment (LCA) of Thermal Sprayed and Chromium Electroplated Coatings, Thermal Spray 2006: Building on 100 Years of Success, B.R. Marple, M.M. Hyland, Y.-C. Lau, R.S. Lima, and J. Voye, Ed., ASM International, Seattle, WA, 2006, p 1399-1405
33. F. Hlawka, E. Bassaine, M. Jourdon, and A. Cornet. Life Cycle Assessment: A New Approach in the Choice of Surface Treatments, Proceedings of the SMT 21, Paris, France, 2007, Published on CD-ROM
34. A. Moign, A. Vardelle, J.G. Legoux, and N.J. Themelis, LCA Comparison of Electroplating and Other Thermal Spray Processes, Expanding Thermal Spray Performance to New Markets and Applications, B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, and G. Montavon, Ed., ASM International, Las Vegas, NV, 2009, p 1207-1212
35. N. Serres, F. Hlawka, S. Costil, C. Langlade, F. Machi, and A. Cornet, Dry Coatings and Ecodesign. Part 1—Environmental Performances & Chemical Properties, Surf. Coat. Technol., 2009, 204(1-2), p 187-19610.1016/j.surfcoat.2009.07.012 ↗
36. N. Serres, F. Hlawka, S. Costil, C. Langlade, and F. Machi, Microstructures and Environmental Assessment of Metallic NiCrBSi Coatings Manufactured Via Hybrid Plasma Spray Process, Surf. Coat. Technol., 2010, 205(4), p 1039-104610.1016/j.surfcoat.2010.03.048 ↗
37. P. Lucas, E.A. King, and A. Doraiswamy, Comparison of Photostructural Changes Induced by Continuous and Pulsed Laser in Chalcogenide Glass, J. Optoelectron. Adv. Mater., 2006, 8(2), p 776-779
38. K. Tanaka, Photo-induced Phenomena in Chalcogenide Glasses: Subgap Photon Effects, Proceedings of SPIE 2003, C. Zhu, Ed., Vol. 5061, 2003, p 16-2310.1117/12.517226 ↗
39. C.B. Schaffer and E. Mazur, Micromachining Using Ultrashort Pulses from a Laser Oscillator, Opt. Photonics News, 2001, 12(4), p 20-2310.1364/OPN.12.4.000020 ↗
40. C. Meneghini and A. Villeneuve, As2S3 Photosensitivity by Two-Photon Absorption: Holographic Gratings and Self-Written Channel Waveguides, J. Opt. Soc. Am. B, 1998, 15(12), p 2946-295010.1364/JOSAB.15.002946 ↗
41. L. Landau and E. Lifchitz, Physique statistique, MIR Éditions, URSS, Moscow, 1984, p 592 (in French)
42. G. Petite and P. Daguzan, L’absorption de l’énergie et ses conséquences, École Thématique du CNRS sur l’ablation laser, CNRS Editions, Paris, France, 1996, p 159-218 (in French)
43. J.C. André and A.B. Vannes, Ed., Techniques d’utilisation des photons—principes et applications, DOPEE Diffusion, Avon, France, 1992, p 708 (in French)
44. A. Catherinot, D. Damiani, C. Champeaux, and G. Girault, Photoablation par laser, Laser de Puissance et Traitements des Matériaux, A.B. Vannes, Ed., Presses Polytechniques et Universitaires Romandes, Lausanne, Switzerland, 1991, p 19-57 (in French)
45. D. Baüerle, Laser Processing and Chemistry, 2nd ed., Springer, Heidelberg, Germany, 1996, p 64910.1007/978-3-662-03253-4 ↗
46. B.N. Chichkov, C. Momma, S. Nolte, F. Von Alvensleben, and A. Tünnermann, Femtosecond, Picosecond and Nanosecond Laser Ablation of Solids, Appl. Phys. A Mater. Sci. Process., 1996, 63, p 109-11510.1007/BF01567637 ↗
47. J.F. Ready, Ed., Handbook of Laser Materials Processing, 1st ed., Laser Institute of America, Magnolia Publishing, Inc., Orlando, 2001
48. A.B. Vannes, Ed., Laser et industries de transformation, Techniques de documentation Lavoisier, Paris, 1986 (in French)
49. J.C. Mallet and R. Fournié, Cours de chimie, Dunod, Paris, France, 1995, p 547 (in French)
50. J.D. McWhirter, Extinction Coefficient and Skin Depth of Alkali Metals from 10 to 1000 nm, Opt. Lasers Eng., 1997, 28, p 305-30910.1016/S0143-8166(97)00018-3 ↗
51. R.C. Weast, Ed., Handbook of Chemistry and Physics, 66th ed., CRC Press, Inc., Boca Raton, FL, 1986
52. J. Meijer, K. Du, A. Gillner, D. Hoffmann, V.S. Kovalenko, T. Matsunawa, A. Ostendorf, R. Poprawe, and W. Schulz, Laser Machining by Short and Ultrashort Pulses, State of the Art and New Opportunities in the Age of the Photons, CIRP Ann. Manuf. Technol., 2002, 51(2), p 531-55010.1016/S0007-8506(07)61699-0 ↗
53. D. Von Der Linde and K. Sokolowski-Tinten, The Physical Mechanisms of Short-Pulse Laser Ablation, Appl. Surf. Sci, 2000, 154(155), p 1-1010.1016/S0169-4332(99)00440-7 ↗
54. H.W. Bergmann, K. Schutte, E. Schubert, and A. Emmel, Laser-Surface Processing of Metals for Industrial Applications, Appl. Surf. Sci., 1995, 86(1-4), p 259-26510.1016/0169-4332(94)00381-5 ↗
55. A. Hoffmann and W. Arnold, Calculation and Measurements of the Ultrasonic Signals Generated by Ablating Material With a Q-Switched Pulse Laser, Appl. Surf. Sci, 1996, 96-98, p 71-7510.1016/0169-4332(95)00468-8 ↗
56. P. Peyre, R. Fabbro, L. Berthe, and C. Dubouchet, Laser Shock Processing of Materials, Physical Processes Involved and Examples of Applications, J. Laser Appl., 1996, 8, p 135-14110.2351/1.4745414 ↗
57. S. Bandyopadhyay, H. Gokhale, J.K. Sarin Sundar, G. Sundararajan, and S.V. Joshi, A Statistical Approach to Determine Process Parameter Impact in Nd:YAG Laser Drilling of IN718 and Ti-6Al-4V Sheets, Opt. Lasers Eng., 2005, 43(2), p 163-18210.1016/j.optlaseng.2004.06.013 ↗
58. J.M. Jouvard, A. Soveja, and N. Pierron, Thermal Modelling of Metal Surface Texturing by Pulsed Laser, Proceedings of the COMSOL Users Conference, 2006, Paris, France
59. R.C.P. Wong, A.P. Hoult, J.K. Kim, and T.X. Yu, Improvement of Adhesive Bonding in Aluminium Alloys Using a Laser Surface Texturing Process, J. Mater. Process. Technol., 1997, 63, p 579-58410.1016/S0924-0136(96)02687-8 ↗
60. D. Neves, A.E. Diniz, and M.S. de Fernandes Lima, Efficiency of the Laser Texturing on the Adhesion of the Coated Twist Drills, J. Mater. Process. Technol., 2006, 179, p 139-14510.1016/j.jmatprotec.2006.03.068 ↗
61. S. Valette, A. Denoirjean, D. Tétard, and P. Lefort, C40E Steel Oxidation Under CO2: Kinetics and Reactional Mechanism, J. Alloys Compd., 2006, 413, p 222-23110.1016/j.jallcom.2005.04.213 ↗
62. A.A. Syed, A. Denoirjean, B. Hannoyer, P. Fauchais, P. Denoirjean, A.A. Khan, and J.C. Labbe, Influence of Substrate Surface Conditions on the Plasma Sprayed Ceramic and Metallic Particles Flattening, Surf. Coat. Technol., 2005, 200, p 2317-233110.1016/j.surfcoat.2005.01.014 ↗
63. J. Foldyna, L. Sitek, J. Ščučka, P. Martinec, J. Valíček, and K. Páleníková, Effects of Pulsating Water Jet Impact on Aluminium Surface, J. Mater. Process. Technol., 2009, 209(20), p 6174-618010.1016/j.jmatprotec.2009.06.004 ↗
64. S. Costil, H. Liao, O. Chretien, A. Loredo, A. Gammoudi, M. Verdier, and C. Coddet, Influence of Surface Laser Cleaning Combined With Substrate Preheating on Thermal Spray Coating Adhesion, Lasers Eng., 2005, 5-6(15), p 325-345
65. H. Li, “Role d’une ablation laser in situ sur lespropriétés mécaniques d’un revêtement élaboré par projection thermique,” PhD Thesis, Université de Technologie de Belfort-Montbéliard (UTBM), 2006 (in French)
66. V. Barnier, “Etude de l’oxidation de l’aluminium induite par traitement laser Nd:Yag : conséquences sur les propriétés d’adhérence d’un revêtement d’alumine élaboré par projection thermique,” PhD Thesis, Université de Bourgogne, 2006 (in French)
67. H. Li, S. Costil, V. Barnier, R. Oltra, H. Liao, and C. Coddet, Surface Preparation by Laser Cleaning in Thermal Spray—An Introduction to the PROTAL® Process, J. Laser Appl., 2008, 20(1), p 12-2110.2351/1.2831623 ↗
68. P. Fauchais, Understanding Plasma Spraying, J. Phys. D Appl. Phys., 2004, 37(9), p R86-R10810.1088/0022-3727/37/9/R02 ↗
69. D.K. Christoulis, S. Guetta, V. Guipont, M.H. Berger, M. Jeandin, L. Berthe, M. Nivard, S. Costil, Y. Ichikawa, K. Ogawa, E. Irissou, J.-G. Legoux, and C. Moreau, Cold Spraying Coupled to Nano-Pulsed Nd-Yag Laser Surface Pre-treatment, J. Therm. Spray Technol., 2010, 19(5), p 1062-107310.1007/s11666-010-9500-5 ↗
70. H. Li, S. Costil, H. Liao, C.-J. Li, M.-P. Planche, and C. Coddet, Effects of Surface Conditions on the Flattening Behaviour of Plasma Sprayed Cu Splats, Surf. Coat. Technol., 2006, 200, p 5435-544610.1016/j.surfcoat.2005.07.058 ↗
71. C.-J. Li, Effects of the Surface Adsorbates on the Morphology of Plasma-Sprayed Splats, Thermal Spray 2005: Explore Its Potential!, E. Lugcheider, Ed., ASM International, Basel, Switzerland, 2005, p 311-319
72. J. Pech, B. Hannoyer, L. Bianchi, A. Denoirjean, and P. Fauchais, Study of Oxide Layer Obtained on 304L Stainless Steel Substrate Heated by a D.C. Plasma Jet, Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, Ed., Sept 15-18, 1997 (Indianapolis), ASM International, 1998, p 775-78210.31399/asm.cp.itsc1997p0775 ↗
73. M. Fukumoto, S. Katoh, and I. Okane, Splat Behaviour of Plasma Sprayed Particles on Flat Surface, Thermal Spraying: Current Status and Future Trends, A. Ohmori, Ed., High Temperature Society of Japan, Kobe, Japan, 1995, p 353-358
74. Y. Danlos, “Etude de l’association lasers—projection thermique pour l’optimisation de revêtements,” PhD Thesis, Université de Technologie de Belfort-Montbéliard (UTBM), 2009 (in French)
75. V. Barnier, O. Heintz, D.E. Roberts, R. Oltra, and S. Costil, XPS and SIMS Study of Aluminium Native Oxide Modifications Induced by Q-Switched Nd:YAG Laser Treatment, Surf. Interface Anal., 2006, 38, p 406-40910.1002/sia.2181 ↗
76. V. Barnier, S. Costil, H. Li, C. Coddet, and R. Oltra, Study of Aluminium Oxidation Induced by a Q-switched Nd:YAG Laser Treatment and Its Influence on the Adhesion Properties of a Plasma-Sprayed Alumina Coating, Thermal Spray 2007: Global Coating Solutions, B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, and G. Montavon, Ed., ASM International, Pekin, China, 2007, p 335-340
77. M. Bray, A. Cockburn, and W. O’Neil, The Laser Assisted Cold Spray Process and Deposit Characterisation, Surf. Coat. Technol., 2009, 203, p 2851-285710.1016/j.surfcoat.2009.02.135 ↗
78. S. Costil, G. Montavon, H. Liao, and C. Coddet, Laser Hybrid Plasma Spray Processes: Tools to Adjust Coating Structural Characteristics, High Temp. Mater. Process. (Redding, CT), 2006, 10(3), p 327-36410.1615/HighTempMatProc.v10.i3.10 ↗
79. S. Costil, H. Liao, A. Gammoudi, and C. Coddet, Influence of Surface Laser Cleaning Combined With Substrate Preheating on the Splat Morphology, J. Therm. Spray Technol., 2005, 14(1), p 31-3810.1361/10599630522657 ↗
80. Y. Danlos, S. Costil, X. Guo, H. Liao, and C. Coddet, Ablation Laser and Heating Laser Combined to Cold Spraying, Surf. Coat. Technol., 2010, 205(4), p 1055-105910.1016/j.surfcoat.2010.06.018 ↗
81. S. Sasaki, Tribological Properties of Coating Films Synthesised by Laser Assisted Plasma Spraying, Surf. Eng., 1997, 13(3), p 238-24210.1179/sur.1997.13.3.238 ↗
82. J.H. Ouyang and S. Sasaki, Microstructure and Tribological Characteristics of ZrO2-Y2O3 Ceramic Coatings Deposited by Laser-Assisted Plasma Hybrid Spraying, Tribol. Int., 2002, 35(4), p 255-26410.1016/S0301-679X(02)00005-1 ↗
83. S.O. Chwa and A. Ohmori, Microstructures of ZrO2-8 wt% Y2O3 Coatings Prepared by a Laser Hybrid Spraying Technique, Surf. Coat. Technol., 2002, 153(2-3), p 304-31210.1016/S0257-8972(01)01686-3 ↗
84. S.O. Chwa and A. Ohmori, Thermal Diffusivity and Erosion Resistance of ZrO2-8 wt% Y2O3 Coatings Prepared by a Laser Hybrid Spraying Technique, Thin Solid Films, 2002, 415(1-2), p 160-16610.1016/S0040-6090(02)00533-3 ↗
85. Z. Zhou, H. Shirasawa, N. Eguchi, and A. Ohmori, Microstructures and Characterization of Zirconia-Yttria Coatings Formed in Laser and Hybrid Spray Process, J. Therm. Spray Technol., 1999, 8(3), p 405-41310.1361/105996399770350359 ↗
86. G. Antou, G. Montavon, F. Hlawka, A. Cornet, C. Coddet, and F. Machi, Evaluation of Modifications Induced on Pore Network and Structure of Partially Stabilized Zirconia Manufactured by Hybrid Plasma Spray Process, Surf. Coat. Technol., 2004, 180-181, p 627-63210.1016/j.surfcoat.2003.10.155 ↗
87. G. Antou, G. Montavon, F. Hlawka, A. Cornet, C. Coddet, and F. Machi, Modification of Ceramic Thermal Spray Deposit Microstructures Implementing In Situ Laser Remelting, Surf. Coat. Technol., 2003, 172(2-3), p 279-29010.1016/S0257-8972(03)00431-6 ↗
88. N. Serres, F. Hlawka, S. Costil, C. Langlade, F. Machi, and A. Cornet, Combined Plasma Spray and In Situ Laser Melting Treatment of NiCrBSi Powder, J. Opto. Adv. Mater., 2010, 12(3), p 505-510
89. N. Serres, F. Hlawka, S. Costil, C. Langlade, and F. Machi, Microstructures of Metallic NiCrBSi Coatings Manufactured Via Hybrid Plasma Spray Process, Thermal Spray: Global Solutions for Future Applications, B.R. Marple, A. Agarwal, M.M. Hyland, Y.C. Lau, C.J. Li, R.S. Lima, and G. Montavon, Ed., DVS-Berichte, Singapore, 2010, p 283-288
90. N. Serres, F. Hlawka, S. Costil, C. Langlade, and F. Machi, Corrosion Behavior of NiCrBSi Alloy Coatings Manufactured Via In Situ Plasma Spray-Laser Re-Melting Process, Thermal Spray: Global Solutions for Future Applications, B.R. Marple, A. Agarwal, M.M. Hyland, Y.C. Lau, C.J. Li, R.S. Lima, and G. Montavon, Ed., DVS-Berichte, Singapore, 2010, p 662-667
91. I. Etsion, State of the Art in Laser Surface Texturing, J. Tribol., 2005, 127, p 248-25310.1115/1.1828070 ↗
92. R. Ranjan, D.N. Lambeth, M. Tromel, P. Goglia, and Y. Li, Laser Texturing for Low‐Flying‐Height Media, J. Appl. Phys., 1991, 69(8), p 5745-574710.1063/1.347908 ↗
93. L. Blunt and S. Xiao, The Use of Surface Segmentation Methods to Characterise Laser Zone Surface Structure on Hard Disc Drives, Wear, 2010, doi: 10.1016/j.wear.2010.06.01410.1016/j.wear.2010.06.014 ↗
94. A. Kovalchenko, O. Ajayi, A. Erdemir, G. Fenske, and I. Etsion, The Effect of Laser Surface Texturing on Transitions in Lubrication Regimes During Unidirectional Sliding Contact, Tribol. Int., 2005, 38(3), p 219-22510.1016/j.triboint.2004.08.004 ↗
95. L. Rapoport, A. Moshkovich, V. Perfilyev, A. Gedanken, Y. Koltypin, E. Sominski, G. Halperin, and I. Etsion, Wear Life and Adhesion of Solid Lubricant Films on Laser-Textured Steel Surfaces, Wear, 2009, 267(5-8), p 1203-120710.1016/j.wear.2009.01.053 ↗
96. Y. Wan and D.S. Xiong, The Effect of Laser Surface Texturing on Frictional Performance of Face Seal, J. Mater. Process. Technol., 2008, 197(1-3), p 96-10010.1016/j.jmatprotec.2007.06.019 ↗
97. I. Etsion and G. Halperin, A Laser Surface Textured Hydrostatic Mechanical Seal, Seal. Technol., 2003, 3, p 6-10
98. C. Vincent, G. Monteil, T. Barriere, and J.C. Gelin, Texturation de surface par laser sur un matériau hétérogène, 18 eme Congrés Français de Mécanique, Grenoble, France, 2007 (in French)
99. M.R.H. Knowles, G. Rutterford, D. Karnakis, and A. Ferguson, Micromachining of Metals, Ceramics and Polymers Using Nanosecond Lasers, Int. J. Adv. Manuf. Technol., 2007, 33(1-2), p 95-10210.1007/s00170-007-0967-2 ↗
100. G. Lallemand, G. Jacrot, E. Cicala, and D.F. Grevey, Grooving by Nd:YAG Laser Treatment, J. Mater. Proc. Technol., 2000, 99(1-3), p 32-3710.1016/S0924-0136(99)00256-3 ↗