Crack Repair in Aerospace Aluminum Alloy Panels by Cold Spray
Source abstract
Abstract
The cold-spray process has recently been recognized as a very useful tool for repairing metallic sheets, achieving desired adhesion strengths when employing optimal combinations of material process parameters. We present herein the possibility of repairing cracks in aluminum sheets by cold spray. A 2099 aluminum alloy panel with a surface 30° V notch was repaired by cold spraying of 2198 and 7075 aluminum alloy powders. The crack behavior of V-notched sheets subjected to bending loading was studied by finite-element modeling (FEM) and mechanical experiments. The simulations and mechanical results showed good agreement, revealing a remarkable K factor reduction, and a consequent reduction in crack nucleation and growth velocity. The results enable prediction of the failure initiation locus in the case of repaired panels subjected to bending loading and deformation. The stress concentration was quantified to show how the residual stress field and failure are affected by the mechanical properties of the sprayed materials and by the geometrical and mechanical properties of the interface. It was demonstrated that the crack resistance increases more than sevenfold in the case of repair using AA2198 and that cold-spray repair can contribute to increased global fatigue life of cracked structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. V.K. Champagne and P.F. Leyman, Repair of apache mast support on AH64 helicopter using cold spray. In: Failure Prevention for System Availability—Proceedings of the 62nd Meeting of the Society for Machinery Failure Prevention Technology.
2. K. Ogawa and T. Niki, Repairing of Degraded Hot Section Parts of Gas Turbines by Cold Spraying, Key Eng. Mater., 2010, 417–418, p 545-548
3. P. Cavaliere and A. Silvello, Processing Parameters Affecting Cold Spay Coatings Performances, Int. J. Adv. Manuf. Technol., 2014, 71, p 263-27710.1007/s00170-013-5465-0 ↗
4. A. Sova, S. Grigoriev, A. Okunkova, and I. Smurov, Potential of Cold Gas Dynamic Spray as Additive Manufacturing Technology, Int. J. Adv. Manuf. Technol., 2013, 69, p 2269-227810.1007/s00170-013-5166-8 ↗
5. H. Assadi, F. Gärtner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51, p 4379-439410.1016/S1359-6454(03)00274-X ↗
6. T. Schmidt, F. Gärtner, H. Assadi, and H. Kreye, Development of a Generalized Parameter Window for Cold Spray Deposition, Acta Mater., 2006, 54, p 729-74210.1016/j.actamat.2005.10.005 ↗
7. S.V. Klinkov, V.F. Kosarev, and M. Rein, Cold Spray Deposition: Significance of Particle Impact Phenomena, Aerosp. Sci. Technol., 2005, 9, p 582-59110.1016/j.ast.2005.03.005 ↗
8. D. Cote, V. Champagne, and R.D. Sisson, Computational Through-process Modeling for Cold Sprayed Alloy Optimization. In: Materials Science of Additive Manufacturing-Proceedings of Materials Science and Technology 2014.
9. B. McNally, Experimental Verification of Through-Process Modeling of Cold Spray Al Alloys. In: AeroMat 2015 Conference and Exposition.
10. L. Ajdelsztajn, B. Jodoin, and J.M. Schoenung, Synthesis and Mechanical Properties of Nanocrystalline Ni Coatings Produced by Cold Gas Dynamic Spraying, Surf. Coat. Technol., 2006, 201, p 1166-117210.1016/j.surfcoat.2006.01.037 ↗
11. K. Spencer, V. Luzin, N. Matthews, and M.-X. Zhang, Residual Stresses in Cold Spray Al Coatings: The Effect Of Alloying and of Process Parameters, Surf. Coat. Technol., 2012, 206, p 4249-425510.1016/j.surfcoat.2012.04.034 ↗
12. S. Rech, A. Trentin, S. Vezzú, J.G. Legoux, E. Irissou, and M. Guagliano, Influence of Pre-heated Al 6061 Substrate Temperature on the Residual Stresses of Multipass Al Coatings Deposited by Cold Spray, J. Therm. Spray Technol., 2011, 20(1–2), p 243-25110.1007/s11666-010-9596-7 ↗
13. P. Cavaliere and A. Silvello, Processing Conditions Affecting Residual Stresses and Fatigue Properties of Cold Spray Deposits, Int. J. Adv. Manuf. Technol., 2015, 81, p 1857-186210.1007/s00170-015-7365-y ↗
14. P. Cavaliere and A. Silvello, Fatigue Behaviour of Cold Sprayed Metals and Alloys: Critical Review, Surf. Eng., 2016, 32(9), p 631-64010.1179/1743294415Y.0000000100 ↗
15. A.G. Gavras, B.F. Chenelle, and D.A. Lados, Effects of Microstructure on the Fatigue Crack Growth Behavior of Light Metals and Design Considerations, Rev. Mater., 2010, 15(2), p 319-329
16. R. Jones, M. Krishnapillai, K. Cairns, and N. Matthews, Application of Infrared Thermography to Study Crack Growth and Fatigue Life Extension Procedures, Fat. Fract. Eng. Mater. Struct., 2010, 33, p 871-88410.1111/j.1460-2695.2010.01505.x ↗
17. B. Bozzini, P. Cavaliere, I. Sgura, and C. Mele, Crack Repairing in AA2099 by Cu Electrodeposition (ECD), Crack Path 2012, Gaeta, Italy, September 19–21 2012, pp. 603–601
18. P. Cavaliere, A. Perrone, and A. Silvello, Multi-objective Optimization of Steel Nitriding, Eng. Sci. Technol., 2016, 19, p 292-312
19. F.R. Menter, M. Kuntz, and R. Langtry, Ten Years of Industrial Experience with the SST Turbulence Model, Turbul. Heat Mass Transf., 2003, 4, p 625-632
20. R.R. Chromik, D. Goldbaum, J.M. Shockley, S. Yue, E. Irissou, J.G. Legoux, and N.X. Randall, Modified Ball Bond Shear Test for Determination of Adhesion Strength of Cold Spray Splats, Surf. Coat. Technol., 2010, 205, p 1409-141410.1016/j.surfcoat.2010.07.037 ↗
21. A. Beakou and K. Charlet, Mechanical Properties of Interfaces Within a Flax Bundle—Part II: Numerical Analysis, Int. J. Adhes. Adhes., 2013, 43, p 54-5910.1016/j.ijadhadh.2013.01.013 ↗
22. ANSYS13.0. ANSYS user manual. http://148.204.81.206/Ansys/150/ANSYS%20Mechanical%20Users%20Guide.pdf , 2012
23. A. Turon, C.G. Davila, P.P. Camanho, and J. Costa, An Engineering Solution for Mesh Size Effects in the Simulation of Delamination Using Cohesive Zone Models, Eng. Fract. Mech., 2007, 74(10), p 1665-168210.1016/j.engfracmech.2006.08.025 ↗
24. P. Cavaliere, Fatigue Properties and Crack Behavior of Ultra-Fine and Nanocrystalline Pure Metals, Int. J. Fatigue, 2009, 31, p 1476-148910.1016/j.ijfatigue.2009.05.004 ↗
25. Q. Wang, N. Birbilis, and M.-X. Zhang, On the Formation of a Diffusion Bond from Cold-Spray Coatings, Met. Trans., 2012, A43(5), p 1395-139910.1007/s11661-012-1098-4 ↗
26. H.X. Hu, S.L. Jiang, Y.S. Tao, T.Y. Xiong, and Y.G. Zheng, Cavitation Erosion and Jet Impingement Erosion Mechanism of Cold Sprayed Ni–Al2O3 Coating, Nucl. Eng. Des., 2011, 241, p 4929-493710.1016/j.nucengdes.2011.09.038 ↗
27. R. Ghelichi, S. Bagherifard, D. Mac Donald, M. Brochu, H. Jahed, B. Jodoin, and M. Guagliano, Fatigue Strength of Al Alloy Cold Sprayed with Nanocrystalline Powders, Int. J. Fatig., 2014, 61, p 51-5710.1016/j.ijfatigue.2013.09.001 ↗
28. F. Kroupa, Nonlinear Behavior in Compression and Tension of Thermally Sprayed Ceramic Coatings, J. Therm. Spray Technol., 2007, 16, p 84-9510.1007/s11666-006-9009-0 ↗
29. A. Moridi, S.M. Hassani-Gangaraj, S. Vezzú, L. Trško, and M. Guagliano, Fatigue Behavior of Cold Spray Coatings: The Effect of Conventional and Severe Shot Peening as Pre-/Post-treatment, Surf. Coat. Technol., 2015, 283, p 247-25410.1016/j.surfcoat.2015.10.063 ↗