journal article·2011-12Open access

Mechanical Properties and Microstructure of VPS and HVOF CoNiCrAlY Coatings

S. Saeidi, K. T. Voisey, D. G. McCartney

Abstract

HVOF and VPS coatings were sprayed using a Praxair (CO-210-24) CoNiCrAlY powder. Free standing coatings underwent vacuum annealing at different temperatures for times of up to 840h. Feedstock powder, as-sprayed and annealed coatings were characterised by SEM, EDS and XRD. The hardness and Young’s modulus of as-sprayed and annealed HVOF and VPS coatings were measured, including determination of Young’s moduli of the individual phases via nanoindentation and measurement of Young’s moduli of coatings at temperatures up to 500°C. The Eshelby inclusion model was used to investigate the effect of microstructure on the coatings’ mechanical properties. The sensitivity of the mechanical properties to microstructural details was confirmed. Young’s modulus was constant to ~200°C then decreased with increasing measurement temperature. Annealing increased Young’s modulus due to a combination of decreased porosity and β volume fraction. Oxide stringers in the HVOF coating maintained its higher hardness than the VPS coating even after annealing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. D. Zhang, S.J. Harris, and D.G. McCartney, Mechanical Properties and Microstructure of HVOF Sprayed Co and Ni Alloy Coatings, Thermal Spray 2003: Advancing the Science & Applying the Technology, 2003, p 829-83610.31399/asm.cp.itsc2003p0829 ↗
2. L. Zhao, M. Parco, and E. Lugscheider, High Velocity Oxy-Fuel Thermal Spraying of a NiCoCrAlY Alloy, Surf. Coat. Technol., 2004, 179, p 272-27810.1016/S0257-8972(03)00818-1 ↗
3. K. Fritscher and Y. Lee, Investigation of an As-Sprayed NiCoCrAlY Overlay Coating—Microstructure and Evolution of the Coating, Mater. Corros., 2005, 56, p 5-1410.1002/maco.200403808 ↗
4. M. Shibata, S. Kuroda, M. Watanabe, and Y. Sakamoto, Oxidation Property of CoNiCrAlY Coatings Prepared by Various Thermal Spraying Techniques, Mater. Sci. Forum, 2006, 522-523, p 339-34410.4028/www.scientific.net/MSF.522-523.339 ↗
5. V. Higuera, F.J. Belzunce, and J. Riba, Influence of the Thermal-Spray Procedure on the Properties of a CoNiCrAlY Coating, Surf. Coat. Technol., 2006, 200, p 5550-555610.1016/j.surfcoat.2005.07.070 ↗
6. M.J. Pomeroy, Coatings for Gas Turbine Materials and Long Term Stability Issues, Mater. Des., 2005, 26, p 223-23110.1016/j.matdes.2004.02.005 ↗
7. H.E. Evans and M.P. Taylor, Delamination Processes in Thermal Barrier Coating Systems, J. Corros. Sci. Eng., 2003, 6, [Paper H 011]
8. M. Shibata, S. Kuroda, H. Murakami, M. Ode, M. Watanabe, and Y. Sakamoto, Comparison of Microstructure and Oxidation Behavior of CoNiCrAlY Bond Coatings Prepared by Different Thermal Spray Processes, 1st Asian Thermal Spray Conference (ATSC 2005), Nagoya, Japan, 2005
9. A. Scrivani, U. Bardi, L. Carrafiello, A. Lavacchi, F. Niccolai, and G. Rizzi, A Comparative Study of High Velocity Oxygen Fuel, Vacuum Plasma, and Axial Plasma Spray for the Deposition of CoNiCrAlY Bond Coat Alloy, J. Therm. Spray Tech., 2003, 12, p 504-50710.1361/105996303772082242 ↗
10. D. Naumenko, V. Shemet, L. Singheiser, and W.J. Quadakkers, Failure Mechanisms of Thermal Barrier Coatings on MCrAlY-type Bondcoats Associated with the Formation of the Thermally Grown Oxide, J. Mater. Sci., 2009, 44, p 1687-170310.1007/s10853-009-3284-3 ↗
11. Y. Itoh, M. Saitoh, and Y. Ishiwata, Characteristics of MCrAlY Coatings Sprayed by High Velocity Oxygen-Fuel Spraying System, J. Eng. Gas Turbines Power, 2000, 122, p 43-4910.1115/1.483173 ↗
12. S. Saeidi, K.T. Voisey, and D.G. McCartney, The Effect of Heat Treatment on the Oxidation Behavior of HVOF and VPS CoNiCrAlY Coatings, J. Therm. Spray Tech., 2009, 182, p 209-21610.1007/s11666-009-9311-8 ↗
13. H. Waki, T. Kitamura, and A. Kobayashi, Effect of Thermal Treatment on High-Temperature Mechanical Properties Enhancement in LPPS, HVOF, and APS CoNiCrAlY Coatings, J. Therm. Spray Tech., 2009, 18, p 500-50910.1007/s11666-009-9402-6 ↗
14. F. Azarmi, T. Coyle, and J. Mostaghimi, Young’s Modulus Measurement and the Study of the Relationship Between Mechanical Properties and Microstructure of Air Plasma Sprayed Alloy 625, Surf. Coat. Technol., 2008. doi: 10.1016/j.surfcoat.2008.09.03510.1016/j.surfcoat.2008.09.035 ↗
15. C.J. Li, A. Ohmori, and R. McPherson, The Relationship Between Microstructure and Young’s Modulus of Thermally Sprayed Ceramic Coatings, J. Mater. Sci., 1997, 32, p 997-100410.1023/A:1018574221589 ↗
16. M. Beghini, G. Benamati, L. Bertini, and F. Frendo, Measurement of Coatings’ Elastic Properties by Mechanical Methods. Part 2. Application to Thermal Barrier Coatings, Exp. Mech., 2001, 41, p 305-31110.1007/BF02323923 ↗
17. Y. Itoh and M. Saitoh, Mechanical Properties of Overaluminized MCrAlY Coatings at Room Temperature, J. Eng. Gas Turbines Power, 2005, 127, p 807-81310.1115/1.1688766 ↗
18. A. Rico, J. Gómez-García, C.J. Múnez, P. Poza, and V. Utrilla, Mechanical Properties of Thermal Barrier Coatings After Isothermal Oxidation: Depth Sensing Indentation Analysis, Surf. Coat. Technol., 2009, 203, p 2307-231410.1016/j.surfcoat.2009.02.035 ↗
19. M. Beghini, L. Bertini, and F. Frendo, Measurement of Coatings’ Elastic Properties by Mechanical Methods. Part 1. Consideration on Experimental Errors, Exp. Mech., 2001, 41, p 293-30410.1007/BF02323922 ↗
20. T.W. Clyne and P.J. Withers, An Introduction to Metal Matrix Composites, Cambridge University Press, Cambridge, 199310.1017/CBO9780511623080 ↗
21. J.D. Eshelby, The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems, Proc. R. Soc. Lond. A Math. Phys. Sci., 1957, 241, p 376-39610.1098/rspa.1957.0133 ↗
22. J.D. Eshelby, The Elastic Field Outside an Ellipsoidal Inclusion, Proc. R. Soc. Lond. A Math. Phys. Sci., 1959, 252, p 561-56910.1098/rspa.1959.0173 ↗
23. J.A. Thompson, Y.C. Tsui, R.C. Reed, D.S. Rickerby, and T.W. Clyne, Creep of Plasma Sprayed CoNiCrAlY and NiCrAlY Bond Coats and Its Effects on Residual Stresses During Thermal Cycling of Thermal Barrier Coating Systems High Temperature Surface Engineering, 6th International Conference on Engineering the Surface, 2000, p 199-21210.1201/9780367814069-16 ↗
24. D. Hull and T.W. Clyne, An Introduction to Composite Materials, CUP, Cambridge, 199610.1017/CBO9781139170130 ↗
25. P. Poza and P.S. Grant, Microstructure Evolution of Vacuum Plasma Sprayed CoNiCrAlY Coatings After Heat Treatment and Isothermal Oxidation, Surf. Coat. Technol., 2006, 201, p 2887-289610.1016/j.surfcoat.2006.06.001 ↗
26. D. Toma, W. Brandl, and U. Köster, Studies on the Transient Stage of Oxidation of VPS and HVOF Sprayed MCrAlY Coatings, Surf. Coat. Technol., 1999, 120-121, p 8-1510.1016/S0257-8972(99)00332-1 ↗
27. W. Brandl, D. Toma, J. Kruger, H.J. Grabke, and G. Matthaus, The Oxidation Behaviour of HVOF Thermal-Sprayed MCrAlY Coatings, Surf. Coat. Technol., 1997, 94-95, p 21-2610.1016/S0257-8972(97)00470-2 ↗
28. J. Toscano, A. Gil, T. Huttel, E. Wessel, D. Naumenko, L. Singheiser, and W.J. Quadakkers, Temperature Dependence of Phase Relationships in Different Types of MCrAlY-Coatings, Surf. Coat. Technol., 2007, 202, p 603-60710.1016/j.surfcoat.2007.06.044 ↗
29. P. Krukovskya, K. Tadlyaa, A. Rybnikovb, I. Kryukovb, N. Mojaiskaiab, V. Kolarikc, and M. Juez-Lorenzoc, Lifetime Modelling for MCrAlY Coatings in Industrial Gas Turbine Blades, Mater. Res., 2002, 7, p 43-4710.1590/S1516-14392004000100007 ↗
30. D.R.G. Achar, R. Munoz-Arroyo, L. Singheiser, and W.J. Quadakkers, Modelling of Phase Distributions in MCrAlY Coatings and Their Interactions with Nickel Based Alloys, J. Phys. IV Fr., 2004, 120, p 231-23810.1051/jp4:2004120027 ↗
31. Y. Tamarin, Protective Coatings for Turbine Blades, ASM International, Materials Park, OH, 2002
32. S. Kuroda and T.W. Clyne, The Quenching Stress in Thermally Sprayed Coatings, Thin Solid Films, 1991, 200, p 49-6610.1016/0040-6090(91)90029-W ↗