journal article·2007-06-15

Three Dimensional Modeling of the Plasma Spray Process

He-Ping Li, E. Pfender

Publisher page

Abstract

Results of simulations of three-dimensional (3D) temperature and flow fields inside and outside of a DC arc plasma torch in steady state are presented with transverse particle and carrier gas injection into the plasma jet. The results show that an increase of the gas flow rate at constant current moves the anode arc root further downstream leading to higher enthalpy and velocity at the exit of the torch anode, and stronger mixing effects in the jet region. An increase of the arc current with constant gas flow rate shortens the arc, but increases the enthalpy and velocity at the exit of the torch nozzle, and leads to longer jets. 3D features of the plasma jet due to the 3D starting conditions at the torch exit and, in particular, due to the transverse carrier gas and particle injection, as well as 3D trajectories and heating histories of sprayed particles are also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Vacuum and Plasma Arcs · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Fauchais P., Vardelle A. (2000) Pending Problems in Thermal Plasmas and Actual Development. Plasma Phys. Contr. Fusion 42 (12, Suppl. B):B365–B38310.1088/0741-3335/42/12B/327 ↗
2. Scott D.A., Kovitya P., Haddad G.N. (1989) Temperatures in the Plume of a DC Plasma Torch. J. Appl. Phys. 66 (11):5232–523910.1063/1.343709 ↗
3. Dilawari A.H., Szekely J., Westhoff R. (1990) An Assessment of the Heat and Fluid Flow Phenomena Inside Plasma Torches in Non-transferred Arc Systems. ISIJ Int. 30(5):381–38910.2355/isijinternational.30.381 ↗
4. Westhoff R., Szekely J. (1991) A Model of Fluid, Heat Flow, and Electromagnetic Phenomena in a Nontransferred Arc Plasma Torch. J. Appl. Phys. 70(7):3455–346610.1063/1.349238 ↗
5. Westhoff R., Dilawari A.H., Szekely J. (1991) A Mathematical Representation of Transport Phenomena Inside a Plasma Torch. Mat. Res. Soc. Symp. Proc. 190:213–21910.1557/PROC-190-213 ↗
6. Murphy A.B., Kovitya P. (1993) Mathematical Model and Laser-Scattering Temperature Measurements of a Direct-Current Plasma Torch Discharging into Air. J. Appl. Phys. 73(10):4759–476910.1063/1.353840 ↗
7. A. Bouvier, C. Delalondre, O. Simonin, and J. Brilhac, Numeric Modelling of the Internal Behaviour of a Vortex Stabilized Plasma Torch, International Symposium on Heat & Mass Transfer Under Plasma Conditions. Cesme, Turkey, 1994, p 79-89
8. Bauchire J.M., Gonzalez J.J., Gleizes A. (1997) Modeling of a DC Plasma Torch in Laminar and Turbulent Flow. Plasma Chem. Plasma Process. 17(4):409–43210.1023/A:1021847113956 ↗
9. S.A. Wutzke, “Conditions Governing the Symptomatic Behavior of an Electric Arc in a Superimposed Flow Field”, Ph. D. Thesis, Department of Mechanical Engineering, University of Minnesota, 1967
10. Lan Yu, “Modelling of D. C. Arc Plasma Torches and Jets”, Master Thesis, Department of Engineering Mechanics, Tsinghua University, 1997 (In Chinese)
11. Peng Han, “Numerical and Experimental Studies on the Characteristics of D. C. Arc Plasma Torches and Jets”, Ph. D. Thesis, Department of Engineering Mechanics, Tsinghua University, 1999 (In Chinese)
12. He-Ping Li, “Studies of Heat Transfer and Fluid Flow in a D. C. Arc Plasma Torch and Plasma Jet”, Ph. D. Thesis, Department of Engineering Mechanics, Tsinghua University, 2001 (In Chinese)
13. Kaddani A., Zahrai S., Delalondre C., Simonin O. (1995) Three-Dimensional Modelling of Unsteady High-Pressure Arcs in Argon. J. Phys. D: Appl. Phys. 28:2294–230510.1088/0022-3727/28/11/010 ↗
14. Speckhofer G., Schmidt H.-P. (1996) Experimental and Theoretical Investigation of High-Pressure Arcs–Part II: The Magnetically Deflected Arc (Three-Dimensional Modeling). IEEE T. Plasma Sci. 24(4):1239–124810.1109/27.536571 ↗
15. Schlitz L.Z., Garimella S.V., Chan S.H. (1999) Gas Dynamics and Electromagnetic Processes in High-Current Arc Plasmas, Part II. Effects of External Magnetic Fields and Gassing Materials. Journal of Applied Physics 85(5):2547–255510.1063/1.369573 ↗
16. Delalondre C., Douce A., Gonzales M., Gleizes A., Guillot J.-B. (1999) 3D Fluid Dynamic Modelling of Electric Arcs. Proc. 14th Int. Symp. Plasma Chem. 1:321–326
17. Kelkar M., Heberlein J. (2000) Physics of an Arc in Cross Flow. J. Phys. D: Appl. Phys. 33:2172–218210.1088/0022-3727/33/17/312 ↗
18. Freton P., Gonzalez J.J., Gleizes A. (2000) Comparison between a Two- and a Three-Dimensional Arc Plasma Configuration. Journal of Physics D: Applied Physics 33:2442–245210.1088/0022-3727/33/19/315 ↗
19. Li He-Ping, Chen Xi (2001) Three-Dimensional Modelling of a DC Non-Transferred Arc Plasma Torch. Journal of Physics D: Applied Physics 34:L99-L10210.1088/0022-3727/34/17/102 ↗
20. Li He-Ping, Chen Xi (2002) Three-Dimensional Modelling of the Flow and Heat Transfer in a Laminar Non-Transferred Arc Plasma Torch. Chinese Phys. 11(1):44–4910.1088/1009-1963/11/1/310 ↗
21. Li He-Ping, Pfender E., Chen Xi (2003) Application of Steenbeck’s Minimum Principle for Three-Dimensional Modeling of DC Arc Plasma Torches. J. Phys. D: Appl. Phys. 36:1084–109610.1088/0022-3727/36/9/306 ↗
22. He-Ping Li, E. Pfender, and Xi Chen, Prediction of Anode Arc Root Position in a DC Arc Plasma Torch, Proceedings of the 16th International Symposium on Plasma Chemistry, Taormina, Italy, June 22-27, 2003
23. W. Finkelnburg, and H. Maecker, “Electric Arcs and Thermal Plasmas,” in Encyclopedia of Physics, Vol. XXII, Springer-Verlag, Berlin, 1956
24. C. Baudry, G. Mariaux, A. Vardelle, C. Delalondre, and E. Meillot, Modeling of Arc Formation in a DC Plasma Spray Torch, Proceedings of the 16th International Symposium on Plasma Chemistry, Taormina, Italy, June 22-27, 2003
25. Mariaux G., Vardelle A. (2005) 3-D Time-Dependent Modelling of the Plasma Spray Process, Part 1: Flow Modeling. Int. J. Therm. Sci. 44:357–36610.1016/j.ijthermalsci.2004.07.006 ↗
26. Y.C. Lee, K.C. Hsu, and E. Pfender, Modeling of Particles Injected into a D.C. Plasma Jet, Proceedings of the 5th International Symposium on Plasma Chemistry, Heriot-Watt University, Edinburgh, Scotland, Vol. 2, 1981, p 795–803
27. McKelliget J., Szekely J., Vardelle M., Fauchais P. (1982) Temperature and Velocity Fields in a Gas Stream Exiting a Plasma Torch. A Mathematical Model and Its Experimental Verification. Plasma Chem. Plasma Process. 2(3):317–33210.1007/BF00566526 ↗
28. Xi Chen, Y. C. Lee, and E. Pfender, The Importance of Knudsen and Evaporation Effects on Modelling in Thermal Plasma Processing, Proc. 6th Int. Symp. Plasma Chem. (July 1983, Montreal, Canada), Vol. 1, 1983, p 51–58
29. El-Kaddah N., McKelliget J., Szekely J. (1984) Heat Transfer and Fluid Flow in Plasma Spraying. Metallur. Trans. B 15:59–7010.1007/BF02661063 ↗
30. Pfender E., Lee Y.C. (1985) Particle Dynamics and Particle Heat and Mass Transfer in Thermal Plasma. Part I. The Motion of a Single Particle without Thermal Effects. Plasma Chem. Plasma Process. 5(3):211–22510.1007/BF00615122 ↗
31. Lee Y.C., Chyou Y.P., Pfender E. (1985) Particle Dynamics and Particle Heat and Mass transfer in Thermal Plasma. Part II. Partical Heat and Mass Transfer in Thermal Plasmas. Plasma Chem. Plasma Process. 5 (4):391–41410.1007/BF00566011 ↗
32. Lee Y.C., Pfender E. (1987) Particle Dynamics and Particle Heat and Mass Transfer in Thermal Plasma. PartIII. Thermal Plasma Jet Reactors and Multiparticle Injection. Plasma Chem. Plasma Process. 7(1):1–2710.1007/BF01015997 ↗
33. Dilawari A.H., Szekely J. (1987) Some Perspectives on the Modelling of Plasma Jets. Plasma Chem. Plasma Process. 7(3):317–32910.1007/BF01016520 ↗
34. Chyou Y.P., Pfender E. (1989) Behavior of Particulates in Thermal Plasma Flows. Plasma Chem. Plasma Process. 9(1):45–7110.1007/BF01015826 ↗
35. Chyou Y.P., Pfender E. (1989) Modeling of Plasma Jets with Superimposed Vortex Flow. Plasma Chem. Plasma Process. 9(2):291–32810.1007/BF01054287 ↗
36. Westhoff R., Trapaga G., Szekely J. (1992) Plasma-Particle Interactions in Plasma Spraying Systems. Metallur. Trans. B 23:683–69310.1007/BF02656448 ↗
37. Ramshaw J.D., Chang C.H. (1992) Computational Fluid Dynamics Modeling of Multicomponent Thermal Plasmas. Plasma Chem. Plasma Process. 12(3):299–32510.1007/BF01447028 ↗
38. Chang C.H., Ramshaw J.D. (1993) Numerical Simulations of Argon Plasma Jets Flowing into Cold Air. Plasma Chem. Plasma Process. 13(2):189–20910.1007/BF01466041 ↗
39. Fincke J.R., Chang C.H., Swank W.D., Haggard D.C. (1994) Entrainment and Demixing in Subsonic Thermal Plasma Jets: Comparison of Measurements and Predictions. Int. J. Heat Mass Trnasfer 37(11):1673–168210.1016/0017-9310(94)90181-3 ↗
40. Bauchire J.M., Gonzalez J.J., Proulx P. (1999) Modelling of the Plasma-Particle Interactions in a Plasma Jet. J. Phys. D: Appl. Phys. 32:675–68110.1088/0022-3727/32/6/013 ↗
41. Wan Y.P., Prasad V., Wang G.-X., Sampath S., Fincke J.R. (1999) Model and Powder Particle Heating, Melting, Resolidification, and Evaporation in Plasma Spraying Processes. ASME J. Heat Transfer 121:691–69910.1115/1.2826034 ↗
42. Williamson R.L., Fincke J.R., Chang C.H. (2000) A Computational Examination of the Sources of Statistical Variance in Particle Parameters During Thermal Plasma Spraying. Plasma Chem. Plasma Process. 20(3):299–32410.1023/A:1007088110319 ↗
43. Liu B., Zhang T., Gawne D.T. (2000) Computational Analysis of the Influence of Process Parameters on the Flow Field of a Plasma Jet. Surf. Coatings Technol. 132:202–21610.1016/S0257-8972(00)00733-7 ↗
44. B. Dussoubs, A. Vardelle, M. Vardelle, P. Fauchais, and N.J. Themelis, Proc. 13th Int. Symp. Plasma Chem. (August 18-22, 1997, Beijing, China), Supplement, Peking University Press, 1997, p 2056–2061
45. B. Dussoubs, P. Fauchais, A. Vardelle, M. Vardelle, and N.J. Themelis, Thermal Spray: A United Forum for Scientific and Technological Advances, C.C. Berndt, Ed., ASM International, Materials Park, Ohio, USA, 1997, p 55710.31399/asm.cp.itsc1997p0557 ↗
46. Leylavergne M., Dussoubs B., Vardelle A., Goubot N. (1998) Comparison of Plasma-Sprayed Coatings Produced in Argon or Nitrogen Atmosphere. J. Thermal Spray Technol. 7(4):527–53610.1361/105996398770350756 ↗
47. Vardelle A., Fauchais P., Dussoubs B., Themelis N.J. (1998) Heat Generation and Particle Injection in a Thermal Plasma Torch. Plasma Chem. Plasma Process. 18(4):551–57410.1023/A:1021815417648 ↗
48. Li He-Ping, Chen Xi (2001) Three-Dimensional Simulation of a Plasma Jet with Transverse Particle and Carrying Gas Injection. Thin Solid Films 390(1–2):175–18010.1016/S0040-6090(01)00915-4 ↗
49. Li He-Ping, Chen Xi (2002) Three-Dimensional Modeling of the Turbulent Plasma Jet Impinging upon a Flat Plate and with Transverse Particle and Carrier-Gas Injection. Plasma Chem. Plasma Process. 22(1):27–5810.1023/A:1012988430995 ↗
50. Chen Xi, Li He-Ping (2003) Three-Dimensional Flow and Heat Transfer in Thermal Plasma Systems. Surf. Coat. Technol. 171:124–13310.1016/S0257-8972(03)00252-4 ↗
51. Ramachandran K., Nishiyama H. (2002) Three-Dimensional Effects of Carrier Gas and Particle Injections on the Thermo-Fluid Fields of Plasma Jets. J. Phys. D: Appl. Phys. 35:307–31710.1088/0022-3727/35/4/306 ↗
52. Ramachandran K., Kikukawa N., Nishiyama H. (2003) 3D Modeling of Plasma–Particle Interactions in a Plasma Jet under Dense Loading Conditions. Thin Solid Films 435:298–30610.1016/S0040-6090(03)00335-3 ↗
53. Peng Han, Lan Yu, and Xi Chen, Modeling of Plasma Jets with Computed Inlet Profiles, Proceedings of the 13th International Symposium on Plasma Chemistry (August 18-22, 1997, Beijing, China), Peking University Press, Vol. 1, 1997, p 338-343
54. He-Ping Li, and Xi Chen, The Effects of the Joule Heating on the DC Arc Plasma Jet Characteristics, Proceedings of the 16th International Symposium on Plasma Chemistry, Taormina, Italy, June 22-27, 2003, Paper ISPC16-106
55. Patankar S.V. (1980) Numerical Heat Transfer and Fluid Flow, Hemisphere Publishing, Taylor and Francis
56. J. Zhu, An Introduction and Guide to the Computer Program FAST-3D, Institute for Hydromechanics, University of Karlsruhe, Report No. 691, 1992
57. Zhang T., Gawne D.T., Liu B. (2000) Computer Modelling of the Influence of Process Parameters on the Heating and Acceleration of Particles during Plasma Spraying. Surf. Coatings Technol. 132:233–24310.1016/S0257-8972(00)00847-1 ↗
58. Ye R., Proulx P., Boulos M.I. (2000) Particle Turbulent Dispersion and Loading Effects in an Inductively Coupled Radio Frequency Plasma. J. Phys. D: Appl. Phys. 33:2154–216210.1088/0022-3727/33/17/310 ↗