Slurry Erosive Wear Evaluation of HVOF-Spray Cr2O3 Coating on Some Turbine Steels
Source abstract
Abstract
In this study, Cr2O3 coatings were deposited on CF8M and CA6NM turbine steels by high-velocity oxy-fuel (HVOF)-spray process and analyzed with regard to their performance under slurry erosion conditions. High Speed Erosion Test Rig was used for slurry erosion tests, and the effects of three parameters, namely, average particle size, speed (rpm), and slurry concentration on slurry erosion of these materials were investigated. SEM micrographs on the surface of samples, before and after slurry erosion tests, were taken to study the erosion mechanism. For the uncoated steels, CA6NM steel showed better erosion resistance in comparison with CF8M steel. The HVOF-sprayed Cr2O3-coated CF8M and CA6NM steels showed better slurry erosion resistance in comparison with their uncoated counterparts. It may be due to the higher hardness as a result of HVOF-sprayed Cr2O3 coating in comparison with the uncoated CF8M and CA6NM steels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Erosion and Abrasive Machining · High-Temperature Coating Behaviors · Coal Combustion and Slurry Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. D.P. Sharma and S. Singh, Operational Problems of Water Turbine in U.P.—With Special Reference to Tiloth Power Station, Proceedings of All India Seminar on Metallurgical Problems in Power Projects, 30-31 Oct. 1987 (Lucknow), p 18-35
2. B.S.K. Naidu, Developing Silt Consciousness in the Minds of Hydropower Engineers, Proceedings of 1st International Conference on Silting Problems in Hydropower Plants, CBIP, 13-15 Oct. 1999 (New Delhi), p 1-36
3. A.P. Harsha and D.K. Bhaskar, Solid Particle Erosion Behaviour of Ferrous and Non-ferrous Materials and Correlation of Erosion Data with Erosion Models, Mater. Des., 2008, 29(9), p 1745-175410.1016/j.matdes.2008.03.016 ↗
4. J.B. Zu, I.M. Hutchings, and G.T. Burstein, Design of a Slurry Erosion Test Rig, Wear, 1990, 140(2), p 331-34410.1016/0043-1648(90)90093-P ↗
5. Z. Feng and A. Ball, The Erosion of Four Materials Using Seven Erodents—Towards an Understanding, Wear, 1999, 233-235, p 674-68410.1016/S0043-1648(99)00176-3 ↗
6. W. Tsai, J.A.C. Humphrey, I. Cornet, and A.V. Levy, Experimental Measurement of Accelerated Erosion in a Slurry Pot Tester, Wear, 1981, 68(3), p 289-30310.1016/0043-1648(81)90178-2 ↗
7. A.V. Levy and P. Chik, The Effects of Erodent Composition and Shape on the Erosion of Steel, Wear, 1983, 89(2), p 151-16210.1016/0043-1648(83)90240-5 ↗
8. M. Liebhard and A. Levy, The Effect of Erodent Particle Characteristics on the Erosion of Metals, Wear, 1991, 151(2), p 381-39010.1016/0043-1648(91)90263-T ↗
9. Y.F. Wang and Z.G. Yang, Finite Element Model of Erosive Wear on Ductile and Brittle Materials, Wear, 2008, 265(5-6), p 871-87810.1016/j.wear.2008.01.014 ↗
10. H. Cetinela, E. Celikb, and M.I. Kusoglu, Tribological Behavior of Cr2O3 Coatings as Bearing Materials, J. Mater. Process. Technol., 2008, 196(1-3), p 259-26510.1016/j.jmatprotec.2007.05.048 ↗
11. I.W. Lyo, H.S. Ahn, and D.S. Lim, Microstructure and Tribological Properties of Plasma-Sprayed Chromium Oxide-Molybdenum Oxide Composite Coatings, Surf. Coat. Technol., 2003, 163-164, p 413-42110.1016/S0257-8972(02)00613-8 ↗
12. C.J. Li, G.J. Yang, and A. Ohmori, Relationship Between Particle Erosion and Lamellar Microstructure for Plasma-Sprayed Alumina Coatings, Wear, 2006, 260, p 1166-117210.1016/j.wear.2005.07.006 ↗
13. L. Pawlowski, The Science and Engineering of Thermal Spray Coatings, 2nd ed., John Wiley & Sons, New York, 2008, p 44810.1002/9780470754085 ↗
14. Y. Liu, T.E. Fisher, and A. Dent, Comparison of HVOF and Plasma-Sprayed Alumina/Titania Coatings-Microstructure, Mechanical Properties and Abrasion Behaviour, Surf. Coat. Technol., 2003, 167(1), p 68-7610.1016/S0257-8972(02)00890-3 ↗
15. D.K. Goyal, H. Singh, and H. Kumar, An Overview of Slurry Erosion Control by the Application of High Velocity Oxy Fuel Sprayed Coatings, J. Eng. Tribol., 2011, 225, p 1092-110510.1177/1350650111412443 ↗
16. B.K. Prasad, A.K. Jha, O.P. Modi, and A.H. Yegneswaran, Effect of Sand Concentration in the Medium and Travel Distance and Speed on the Slurry Wear Response of a Zinc-Based Alloy Alumina Particle Composite, Tribol. Lett., 2004, 17(2), p 301-30910.1023/B:TRIL.0000032468.27468.2c ↗
17. J. Postlethwaite and S. Nesic, Erosion in Disturbed Liquid/Particle Pipe Flow: Effects of Flow Geometry and Particle Surface Roughness, Corrosion, 1993, 49(10), p 850-85710.5006/1.3316009 ↗
18. M.M. Salama, An Alternative to API, 14E Erosional Velocity Limits for Sand Laden Fluids, J. Energy Resour. Technol., 2000, 122(2), p 71-7710.1115/1.483167 ↗
19. T. Manisekaran, M. Kamaraj, S.M. Sharrif, and S.V. Joshi, Slurry Erosion Studies on Surface Modified 13Cr-4Ni Steels: Effect of Angle of Impingement and Particle Size, J. Mater. Eng. Perform., 2007, 16(5), p 567-57210.1007/s11665-007-9068-5 ↗
20. R. Gupta, S.N. Singh, and V. Sehadri, Prediction of Uneven Wear in a Slurry Pipeline on the Basis of Measurements in a Pot Tester, Wear, 1995, 184(2), p 169-17810.1016/0043-1648(94)06566-7 ↗
21. S. Lathabai, M. Ottmuller, and I. Fernandez, Solid Particle Erosion Behaviour of Thermal Sprayed Ceramic, Metallic and Polymer Coatings, Wear, 1998, 221(2), p 93-10810.1016/S0043-1648(98)00267-1 ↗
22. G. Bolelli, V. Cannillo, L. Lusvarghi, and T. Manfredini, Wear Behaviour of Thermally Sprayed Ceramic Oxide Coatings, Wear, 2006, 261(11-12), p 1298-131510.1016/j.wear.2006.03.023 ↗
23. A. Elkholy, Prediction of Abrasion Wear for Slurry Pump Materials, Wear, 1983, 84(1), p 39-4910.1016/0043-1648(83)90117-5 ↗
24. A.V. Levy and G. Hickey, Liquid-Solid Particles Slurry Erosion of Steels, Wear, 1987, 117(2), p 129-14610.1016/0043-1648(87)90251-1 ↗
25. I. Tarjan and E. Debreczeni, Theoretical and Experimental Investigation on the Wear of Pipeline Caused by Hydraulic Transport, Proceedings of the 2nd International Conference on Hydraulic Transport of Solids in Pipes, N.G. Coles and S.K. Hemmings, Ed., B.H.R.A., Cranfield, UK, 1972, p l-14
26. G.F. Truscott, A Literature Survey on Wear on Pipelines, B.H.R.A. Fluid Engineering, 1st ed., Cranfield Publication, Cranfield, UK, TN 1295, 1975, p 1295
27. B.K. Gandhi, S.N. Singh, and V. Seshadri, Study of the Parametric Dependence of Erosion Wear for the Parallel Flow of Solid-Liquid Mixtures, Tribol. Int., 1999, 32(5), p 275-28210.1016/S0301-679X(99)00047-X ↗
28. T.R. Bajracharya, B. Acharya, C.B. Joshi, R.P. Saini, and O.G. Dahlhaug, Sand Erosion of Pelton Turbine Nozzles and Buckets: A Case Study of Chilime Hydropower Plant, Wear, 2008, 264(3-4), p 177-18410.1016/j.wear.2007.02.021 ↗
29. M.K. Padhy and R.P. Saini, Effect of Size and Concentration of Silt Particles on Erosion of Pelton Turbine Buckets, Energy, 2009, 34(10), p 1477-148310.1016/j.energy.2009.06.015 ↗
30. D. Graham and R.M. Baul, An Investigation into the Mode of Metal Removal in the Grinding Process, Wear, 1972, 19(3), p 301-31410.1016/0043-1648(72)90122-6 ↗
31. G.W. Stachowiak and A.W. Batchelor, Engineering Tribology, Elsevier, Amsterdam, 1993, p 511
32. D.W. Wheeler and R.J.K. Wood, Erosion of Hard Surface Coatings for Use in Offshore Gate Valves, Wear, 2005, 258(1-4), p 526-53610.1016/j.wear.2004.03.035 ↗
33. D.J. O’Flynn, M.S. Bingley, M.S.A. Bradley, and A.J. Burnett, A Model to Predict the Solid Particle Erosion Rate of Metals and its Assessment Using Heat-Treated Steels, Wear, 2001, 248(1-2), p 162-17710.1016/S0043-1648(00)00554-8 ↗
34. J.F. Santa, J.C. Baena, and A. Toro, Slurry Erosion of Thermal Spray Coatings and Stainless Steels for Hydraulic Machinery, Wear, 2007, 263(1-6), p 258-26410.1016/j.wear.2006.12.061 ↗