journal article·2008-12

Effective Parameters in Axial Injection Suspension Plasma Spray Process of Alumina-Zirconia Ceramics

F. Tarasi, M. Medraj, A. Dolatabadi, J. Oberste-Berghaus, C. Moreau

Journal of Thermal Spray Technology· Volume 17· Issue 5-6
Publisher page

Abstract

Abstract Suspension Plasma Spray (SPS) is a novel process for producing nano-structured coatings with metastable phases using extra small particles as compared to conventional thermal spraying. Suspension spraying involves, atomization, solvent evaporation and melts consolidation, which can cause substantial complexity in the system. Using feedstock mixtures for composite coatings, such as alumina and zirconia, intricacy of the system increases even more. There is consequently a need to better understand the relationship between plasma spray conditions and resulting coating microstructure and defects. In this study, an alumina/ 8 wt% yttria stabilized zirconia was deposited by axial injection SPS process. The effects of principal deposition parameters on the microstructural features are evaluated by using Taguchi design of experiment (DOE). The microstructural features include microcracks, porosities and deposition rate. To better understand the role of the spray parameters, in-flight particle characteristics, i.e. temperature and velocity were also measured. The role of the porosity in this multi-component structure is studied as well. The results indicate that thermal diffusivity of the coatings, an important property for potential thermal barrier applications, is barely affected by the changes in porosity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. C. Delbos, C. Rat, C. Bonhomme, J. Fazilleau, J.F. Coudert, P. Fauchais (2004) Influence of Powder Size Distributions on Microstructural Features of Finely Structured Plasma Sprayed Coatings, High Temp. Mater. Process. 8, 397–406.10.1615/HighTempMatProc.v8.i3.50 ↗
2. C. Monterrubio-Badillo, H. Ageorges, T. Hartier, J.F. Codert, and P. Fauchais, Plasma Spraying of a Perovskite Suspension for SOFC Cathodes, Proceedings of the 2003 International Thermal Spray Conference: Advancing the Science & Applying the Technology, B.R. Marple and C. Moreau, Eds., May 5-8, 2003 (Orlando, FL), ASM International, 2003, p 687-69210.31399/asm.cp.itsc2003p0687 ↗
3. S. Siegmann, N. Margadant, A. Zagorski, and M. Arana-Antelo, Composition of Particle In-Flight-Characteristics and Coating Properties, Proceedings of the 2003 International Thermal Spray Conference: Advancing the Science & Applying the Technology, B.R. Marple and C. Moreau, Eds., May 5-8, 2003 (Orlando, FL), ASM International, 2003, p 1591-159810.31399/asm.cp.itsc2003p1591 ↗
4. C.J. Li, W.B. Wang, A. Ohmori, and K. Tani, Relationship Between the Microstructure and Properties of Thermally Sprayed Deposits, Proceedings of the 15th Thermal Spray Conference, C. Coddet, Ed., May 25-29, 1998 (Nice, France), ASM International, 1, p 481-48710.1361/105996302770348754 ↗
5. C. Delbos, J. Fazilleau, V Rat, JF Coudert, P. Fauchais, B Pateyron, Phenomena Involved in Suspension Plasma Spraying Part 2: Zirconia Particle Treatment and Coating Formation, Plasma Chem. Plasma Process. 2006,26, p393–41410.1007/s11090-006-9020-8 ↗
6. P. Fauchais, V. Rat, C. Delbos, J.F. Coudert, T. Chartier, L. Bianchi, Understanding of Suspension DC Plasma Spraying of Finely Structured Coatings for SOFC, IEEE Trans. Plasma Sci., 33, 2005, 920–930.10.1109/TPS.2005.845094 ↗
7. S. Deshpande, A. Kulkarni, S. Sampath, and H. Herman, Application of Image Analysis for Characterization of Porosity in Thermal Spray Coatings and Correlation with Small Angle Neutron Scattering, Surf. Coat. Technol., 2004, 187, p 6-1610.1016/j.surfcoat.2004.01.032 ↗
8. C- Li, A. Ohmori 2002 Relationship Between the Microstructure and Properties of Thermally Sprayed Deposits, J. Therm. Spray Technol. 11, 365–374.10.1361/105996302770348754 ↗
9. F. Cernuschi, P. Bianchi, M. Leoni, P. Scardi, 1999 - Thermal Diffusivity/Microstructure Relationship in Y-PSZ Thermal Barrier Coatings, J. Therm. Spray Technol. 8, p 102–109.10.1361/105996399770350629 ↗
10. A.S. Houlbert, P. Cielo, C. Moreau, M. Lamontagne 1994 Measurement of Thermal Diffusivity and Anisotropy of plasma-sprayed coatings, Int. J. Thermophys. 15, p525–546.10.1007/BF01563712 ↗
11. G.-E.-P Box, W.-G Hunter, and J.-S. Hunter, Statistics for Experimenters an Introduction to Design, Data Analysis, and Model Buildings. John Wiley & Sons Inc., Canada, 1978
12. J. Oberste Berghaus, J.G. Legoux, C. Moreau, F. Tarasi, and T. Chraska, Mechanical and Thermal Transport Properties of Suspension Thermal Sprayed Alumina-Zirconia Composite Coatings, J. Therm. Spray Technol., 2008, 17(1), p 91-10410.1007/s11666-007-9146-0 ↗
13. U. Schulz, C. Leyens, K. Fritscher, M. Peters, B. Saruhan-Brings, and O. Lavigne, Some Recent Trends in Research and Technology of Advanced Thermal Barrier Coatings, Aerosp. Sci. Technol., 2003, 7, p 73-8010.1016/S1270-9638(02)00003-2 ↗
14. R. Soltani, T.W. Coyle, J. Mostaghimi, R.S. Lima, and C. Moreau, Thermo-Physical Properties of Plasma Sprayed Yttria Stabilized Zirconia Coatings, Surf. Coat. Technol., 2008, 202(16), p 3954-395910.1016/j.surfcoat.2008.02.011 ↗