journal article·2008-09Open access

Preparation of Aluminum Coatings Containing Homogenous Nanocrystalline Microstructures Using the Cold Spray Process

A. C. Hall, L. N. Brewer, T. J. Roemer

Abstract

Nanostructured materials are of widespread interest because of the unique properties they offer. Well-proven techniques, such as ball milling, exist for preparing powders with nanocrystalline microstructures. Nevertheless, consolidation of nanocrystalline powders is challenging and presents an obstacle to the use of nanocrystalline metals. This work demonstrates that nanocrystalline aluminum powders can be consolidated using the cold spray process. Furthermore, transmission electron microscopy (TEM) analysis of the nanocrystalline cold spray coatings reveals that the cold spray process can cause significant grain refinement. Inert gas atomized 6061 and 5083 aluminum powders were ball milled in liquid nitrogen resulting in micron-sized powder containing 250-400 nm grains. Cold spray coatings prepared using these feed stock materials exhibited homogenous microstructures with grain sizes of 30-50 nm. TEM images of the as-received powders, ball-milled powders, and cold spray coatings are shown.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. H. Gleiter, Nanostructured Materials: State of the Art, Perspect. NanoStruct. Mater., 1995, 6(1-4), p 3-1410.1016/0965-9773(95)00025-9 ↗
2. C.C. Koch, Synthesis of nanostructured Materials By Mechanical Milling: Problemens and Opportunities, NanoStruct. Mater., 1997, 9(1), p 13-2210.1016/S0965-9773(97)00014-7 ↗
3. A.E. Romanov, Continuum Theory of Defects in Nanoscaled Materials, NanoStruct. Mater., 1995, 6(1-4) p 125-13410.1016/0965-9773(95)00037-2 ↗
4. Trelewicz J. R., C. A. Schuh (2007). The Hall-Petch Breakdown in Nanocrystalline Metals: A Crossover to Glass-Like Deformation. Acta Mater. 55: 5948-595810.1016/j.actamat.2007.07.020 ↗
5. A. B. Frazier, R. O. Warrington, C. Friedrich, The Miniaturization Technologies: Past; Present; and Future, IEEE Trans. Industr. Electr., 1995, 42(5), p 423-43010.1109/41.464603 ↗
6. K.N. Bhat, Micromachining for Microelectromechanical Systems, Defense Sci. J., 1998, 48(1), p 5-1910.14429/dsj.48.3863 ↗
7. D.P. Adams, M.J. Vasile, A.S.M. Krishnan, Microgrooving and Microthreading Tools for Fabricating Curvilinear Features, Precision Eng. J. Intl. Soc. Precision Eng. Nanotechnol., 2000, 24(4), p 347-356
8. J. Mohr, LIGA: A Technology for Fabricating Microstructures and Microsystems, Sensors Mater., 1998, 10(6), p 363-373
9. W. Bacher, W. Menz, J. Mohr, The LIGA Technique and Its Potential for Microsystems—A Survey, IEEE Trans. Industr. Electr., 1995, 42(5), p 431-44110.1109/41.464604 ↗
10. S.M. Spearing, Materials Issues in Microelectromechanical Systems, Acta Mater., 2000, 48, p 179-19610.1016/S1359-6454(99)00294-3 ↗
11. H.J. Fecht, Nanostructure Formation by Mechanical Attrition, NanoStruct. Mater., 1995, 6(1-4), p 33-4210.1016/0965-9773(95)00027-5 ↗
12. L. Ajdelsztajn, B. Jodoin, G. E. Kim, J. M. Schoenung, J. Mondoux, Cold Spray Deposition of Nanocrystalline Aluminum Alloys, Metall. Mater. Trans. A, 2005, 36A, p 657-66610.1007/s11661-005-0182-4 ↗
13. P. Alkimov, V. F. Kosarev, A. N. Papyrin, A Method of Cold Gas-Dynamic Deposition, Sov. Phys. Dokl, 1990, 35(12), p 1047-1049
14. D.L. Gilmore, R. C. Dykhuizen, R. A. Neiser, T. J. Roemer, M. F. Smith, Particle Velocity and Deposition Efficiency in the Cold Spray Process, J. Thermal Spray Technol., 1999, 8(4), p 576-58210.1361/105996399770350278 ↗
15. R.C. Dykhuizen, M.F. Smith, D.L. Gilmore, R.A. Neiser, X. Jiang, S. Sampath, Impact of High Velocity Cold Spray Particles, J. Thermal Spray Technol., 1999, 8(4), p 559-56410.1361/105996399770350250 ↗
16. A.C. Hall, D.J. Cook, R.A. Neiser, T.J. Roemer, D.A. Hirschfeld, The Effect of a Simple Annealing Heat Treatment on the Mechanical Properties of Cold-Sprayed Aluminum, J. Thermal Spray Technol., 2006, 15(2), p 233-23810.1361/105996306X108138 ↗
17. R.C. Dykhuizen, M.F. Smith, Gas Dynamic Principles of Cold Spray, J. Thermal Spray Technol., 1998, 7(2), p 205-21210.1361/105996398770350945 ↗
18. J. Eckert, Relationships Governing the Grain Size of Nanocrystalline Metals and Alloys, NanoStruct. Mater., 1995, 6(1-4), p 431-41610.1016/0965-9773(95)00084-4 ↗