journal article·2010-01

High Temperature Corrosion Behavior of Cold Spray Ni-20Cr Coating on Boiler Steel in Molten Salt Environment at 900 °C

Niraj Bala, Harpreet Singh, Satya Prakash

Journal of Thermal Spray Technology· Volume 19· Issue 1-2
Publisher page

Abstract

Abstract In this investigation, Ni-20Cr alloy powder was deposited on SA 516 boiler steel by cold spraying. The oxidation kinetics of both coated and uncoated samples, evaluated in molten salt, followed a parabolic rate. The rate constant of the Ni-20Cr coated steel was much lower than that of the bare boiler steel. X-ray diffraction, SEM-EDX, and X-ray mapping were used to analyze the oxidation products of the coated and uncoated boiler steel. The uncoated steel exhibited intense spalling and peeling of its oxide scale, which may be due to the formation of Fe2O3 oxides. The Ni-20Cr coating reduced the weight gain of the steel by more than 87% possibly due to the formation of nickel and chromium oxides.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. P. Hancock, Vanadic and Chloride Attack of Superalloys, Mater. Sci. Technol., 1987, 3, p 536-54410.1080/02670836.1987.11782265 ↗
2. K. Natesan, Corrosion-Erosion Behavior of Materials in a Coal-Gasification Environment, Corrosion, 1976, 32(9), p 364-37010.5006/0010-9312-32.9.364 ↗
3. M.M. Barbooti, S.H. Al-Madfai, and J. Nassouri, Thermochemical Studies on Hot Ash Corrosion of Stainless Steel 304 and Inhibition by Magnesium Sulphate, Thermochim. Acta, 1988, 126, p 43-4910.1016/0040-6031(88)87248-4 ↗
4. J. Karthikeyan, Cold Spray Technology: International Status and USA Efforts, 2004, p 1-14
5. V.F. Kosarev, S.V. Klinkov, A.P. Alkhimov, and A.N. Papyrin, On Some Aspects of Gas Dynamics of the Cold Spray Process, J. Therm. Spray Technol., 2003, 12(2), p 265-28110.1361/105996303770348384 ↗
6. R. Knight and R.W. Smith, HVOF Sprayed 80/20 NiCr Coatings-Process Influence Trends, Thermal Spray: International Advances in Coatings Technology, C.C. Berndt, Ed., May 25-June 5, 1992 (Orlando, FL), ASM International, 1992, p 159
7. M.R. Dorfman and J.A. DeBarro, Thermal Spraying: Current Status and Future Trends, Akira Ohmori, Ed., May 22-26, 1995 (Kobe, Japan), High Temperature Society of Japan, 1995, p 567
8. H. Edris, D.G. McCartney, and A.J. Sturgeon, Microstructural Characterization of High Velocity Oxy-Fuel Sprayed Coatings of Inconel 625, J. Mater. Sci., 1997, 32, p 86310.1023/A:1018589230250 ↗
9. A. Ul-Hamid, Diverse Scaling Behavior of the Ni-20Cr Alloy, Mater. Chem. Phys., 2003, 80, p 135-14210.1016/S0254-0584(02)00448-0 ↗
10. B.S. Sidhu and S. Prakash, Evaluation of the Corrosion Behaviour of Plasma-Sprayed Ni3Al Coatings on Steel in Oxidation and Molten Salt Environments at 900 °C, Surf. Coat. Technol., 2003, 166, p 89-10010.1016/S0257-8972(02)00772-7 ↗
11. H. Singh, D. Puri, and S. Prakash, Some Studies on Hot Corrosion Performance of Plasma Sprayed Coatings on a Fe-Based Superalloy, Surf. Coat. Technol., 2005, 192, p 27-3810.1016/j.surfcoat.2004.03.030 ↗
12. S.N. Tiwari and S. Prakash, “Studies on the Hot Corrosion Behaviour of Some Superalloys in Na2SO4-V2O5,” paper presented at Symposium on Localised Corrosion and Environmental Cracking (SOLCEC) (Kalpakkam, India), 1997, C-33
13. B.S. Sidhu and S. Prakash, Performance of NiCrAlY, Ni-Cr, Stellite-6 and Ni3Al Coatings in Na2SO4-60% V2O5 Environment at 900 °C Under Cyclic Conditions, Surf. Coat. Technol., 2006, 201, p 1643-165410.1016/j.surfcoat.2006.02.035 ↗
14. L. Shi, Accelerated Oxidation of Iron Induced by Na2SO4 Deposits in Oxygen at 750 °C—A New Type Low-Temperature Hot Corrosion, Oxid. Met., 1993, 40(1-2), p 197-21110.1007/BF00665265 ↗
15. S.N. Tiwari and S. Prakash, Hot Corrosion Behaviour of an Iron-Base Superalloy in Salt Environment at Elevated Temperatures, Proceedings of the Symposium on Metals and Materials Research, IIT, Madras, 4-5th July 1996, p 107-117
16. D. Das, R. Balasubramaniam, and M.N. Mungole, Hot Corrosion of Fe3Al, J. Mater. Sci., 2002, 37(6), p 1135-114210.1023/A:1014307219963 ↗
17. B. Singh, “Studies on the Role of Coatings in Improving Resistance to Hot Corrosion and Degradation,” Ph.D. Thesis, IITR, Roorkee, India, 2003
18. Y. Longa-Nava, Y.S. Zhang, M. Takemoto, and R.A. Rapp, Hot Corrosion of Nickel-Chromium and Nickel-Chromium-Aluminum Thermal-Spray Coatings by Sodium Sulfate-Sodium Metavanadate Salt, Corrosion, 1996, 52(9), p 680-68910.5006/1.3292158 ↗
19. G. Calvarin, R. Molins, and A.M. Huntz, Oxidation Mechanism of Ni-20Cr Foils and its Relation to the Oxide-Scale Mircrostructure, Oxid. Met., 2000, 53(1-2), p 25-4810.1023/A:1004578513020 ↗
20. H. Nickel, W.J. Quadakkers, and L. Singheiser, Analysis of Corrosion Layers on Protective Coatings and High Temperature Materials in Simulated Service Environments of Modern Power Plants Using SNMS, SIMS, SEM, TEM, RBS and x-ray Diffraction Studies, Anal. Bioanal. Chem., 2002, 374, p 581-58710.1007/s00216-001-1185-7 ↗
21. T. Sundararajan, S. Kuroda, T. Itagaki, and F. Abe, Steam Oxidation Resistance of Ni-Cr Thermal Spray Coatings on 9Cr-1Mo Steel. Part 2: 50Ni-50Cr, ISIJ Int., 2003, 43(1), p 104-11110.2355/isijinternational.43.104 ↗
22. F.H. Stott, Principles of Growth and Adhesion of Oxide Scales, The Role of Active Elements in the Oxidation Behaviour of High Temperature Metals and Alloys, E. Lang, Ed., Elsevier Applied Science, London, 1998,
23. N. Bala, H. Singh, and S. Prakash, High Temperature Oxidation Studies of Cold Sprayed Ni-20Cr and Ni-50Cr Coatings on SAE 213-T22 Boiler Steel, Appl. Surf. Sci., 2009, 255(15), p 6862-686910.1016/j.apsusc.2009.03.006 ↗