journal article·2010-01Open access

Degradation of Thermal Barrier Coatings by Fuel Impurities and CMAS: Thermochemical Interactions and Mitigation Approaches

Prabhakar Mohan, Travis Patterson, Bo Yao, Yongho Sohn

Journal of Thermal Spray Technology· Volume 19· Issue 1-2

Abstract

Degradation of free-standing yttria-stabilized zirconia (YSZ) and CoNiCrAlY coatings (300 μm) due to V2O5 and a laboratory-synthesized CMAS was investigated at temperatures up to 1400 °C. Reactions, phase transformations, and microstructural development in coatings were examined by using x-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The molten deposits destabilized the YSZ and reacted with the thermally grown oxide with various phase transformations and reaction product formation. A dense, continuous environmental barrier overlay, based on oxides, applied by electrophoretic deposition was effective in mitigating the molten deposit attack. Enriching CMAS composition with Al promoted the crystallization of anorthite platelets and MgAl2O4 spinel, and mitigated CMAS ingression. EPD MgO overlay was also effective in protection against V2O5 melt by formation of magnesium vanadates. EPD alumina overlay deposited on thermal barrier coatings with APS 8YSZ and bond-coated IN939 superalloy retained its adhesion and structural integrity after prolonged furnace thermal cycle test at 1100 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Electrophoretic Deposition in Materials Science · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. R.A. Miller, Oxidation-Based Model for Thermal Barrier Coating Life, J. Am. Ceram. Soc., 1984, 67(8), p 517-52110.1111/j.1151-2916.1984.tb19162.x ↗
2. J. Stringer, Coatings in the Electricity Supply Industry: Past, Present, and Opportunities for the Future, Surf. Coat. Technol., 1998, 108-109, p 1-910.1016/S0257-8972(98)00642-2 ↗
3. A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meier, and F.S. Pettit, Mechanisms Controlling the Durability of Thermal Barrier Coatings, Prog. Mater. Sci., 2001, 46, p 505-55310.1016/S0079-6425(00)00020-7 ↗
4. N.P. Padture, M. Gell, and E.H. Jordan, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, 2002, 296, p 280-28410.1126/science.1068609 ↗
5. A.G. Evans, M.Y. He, and J.W. Hutchinson, Mechanism Based Scaling Laws for the Durability of Thermal Barrier Coatings, Prog. Mater. Sci., 2001, 46, p 24910.1016/S0079-6425(00)00007-4 ↗
6. A. Scrivani, U. Bardi, L. Carrafiello, A. Lavacchi, and F. Niccolai, A Comparative Study of High Velocity Oxygen Fuel, Vacuum Plasma Spray, and Axial Plasma Spray for the Deposition of CoNiCrAlY Bond Coat Alloy, J. Therm. Spray Tech., 2003, 12(4), p 504-50710.1361/105996303772082242 ↗
7. R.L. Jones, Some Aspects of the Hot Corrosion of Thermal Barrier Coatings, J. Therm. Spray Technol., 1997, 6(1), p 77-8410.1007/BF02646315 ↗
8. P. Mohan, B. Yuan, T. Patterson, V.H. Desai, and Y.H. Sohn, Degradation of Yttria-Stabilized Zirconia Thermal Barrier Coatings by Vanadium Pentoxide, Phosphorous Pentoxide, and Sodium Sulfate, J. Am. Ceram. Soc., 2007, 90(11), p 3601-360710.1111/j.1551-2916.2007.01941.x ↗
9. C. Mercer, S. Faulhaber, A.G. Evans, and R. Darolia, A Delamination Mechanism for Thermal Barrier Coatings Subject to Calcium-Magnesium-Alumino-Silicate (CMAS) Infiltration, Acta Mater., 2005, 53(4), p 1029-103910.1016/j.actamat.2004.11.028 ↗
10. S. Kramer, J. Yang, and C.G. Levi, Thermochemical Interaction of Thermal Barrier Coatings with Molten CaO-MgO-SiO2-Al2O3 (CMAS) Deposits, J. Amer. Ceram. Soc., 2006, 89(10), p 3167-317510.1111/j.1551-2916.2006.01209.x ↗
11. P. Mohan, B. Yuan, T. Patterson, V.H. Desai, and Y.H. Sohn, Degradation of Yttria-Stabilized Zirconia Thermal Barrier Coatings by Molten CMAS (CaO-MgO-Al2O3-SiO2) Deposits, Mater. Sci. Forum, 2008, 595-598, p 207-21210.4028/www.scientific.net/MSF.595-598.207 ↗
12. M.P. Borom, C.A. Johnson, and L.A. Peluso, Role of Environmental Deposits and Operating Surface Temperature in Spallation of Air Plasma Sprayed Thermal Barrier Coatings, Surf. Coat. Technol., 1996, 86-87, p 116-12610.1016/S0257-8972(96)02994-5 ↗
13. B.A. Nagaraj and D.J. Wortman, Burner Rig Evaluation of Ceramic Coatings with Vanadium-Contaminated Fuels, Trans. ASME: J. Eng. Gas Turbines Power, 1990, 112, p 536-542
14. B.R. Marple, J. Voyer, C. Moreau, and D.R. Nagy, Corrosion of Thermal Barrier Coatings by Vanadium and Sulfur Compounds, Mater. High Temp., 2000, 17(3), p 397-41210.1179/mht.2000.17.3.004 ↗
15. R.L. Jones, C.E. Williams, and S.R. Jones, Reaction of Vanadium Compounds with Ceramic Oxides, J. Electrochem. Soc., 1986, 133(1), p 227-23010.1149/1.2108530 ↗
16. D.W. Sustitzky, W. Hertl, and C.B. Carter, Destabilization of Zirconia Thermal Barriers in the Presence of V2O5, J. Am. Ceram. Soc., 1988, 71(11), p 992-100410.1111/j.1151-2916.1988.tb07570.x ↗
17. P. Mohan, T. Patterson, V.H. Desai, and Y.H. Sohn, Degradation of Free-Standing Air Plasma Sprayed CoNiCrAlY Coatings by Vanadium and Phosphorus Pentoxides, Surf. Coat. Technol., 2008, 203, p 427-43110.1016/j.surfcoat.2008.08.068 ↗
18. W.C. Hasz, M.P. Borom, and C.A. Johnson, Protection of Thermal Barrier Coating with an Impermeable Barrier Coating, U.S. Patent No. 5871820, 1999
19. W.C. Hasz, C.A. Johnson, and M.P. Borom, Protection of Thermal Barrier Coatings by a Sacrificial Surface Coating, U.S. Patent No. 5660885, 1997
20. P. Mohan, T. Patterson, and Y.H. Sohn, Electrophoretic Deposition of Environmental Barrier Overlay Coatings for Yttria-Stabilized Zirconia Thermal Barrier Coatings, Proceedings of ASME Turbo Expo 2009: Power for Land, Sea and Air GT2009, GT2009-5983910.1115/GT2009-59839 ↗
21. P. Mohan, B. Yao, T. Patterson, and Y.H. Sohn, Electrophoretically Deposited Alumina as Protective Overlay for Thermal Barrier Coatings Against CMAS Degradation, Surf. Coat. Technol., 2009. doi: 10.1016/j.surfcoat.2009.09.05510.1016/j.surfcoat.2009.09.055 ↗
22. C. Batista, A. Portinha, R.M. Ribeiro, V. Teixeira, and C.R. Oliveira, Evaluation of Laser-Glazed Plasma-Sprayed Thermal Barrier Coatings Under High Temperature Exposure to Molten Salts, Surf. Coat. Technol., 2006, 200(24), p 6783-679110.1016/j.surfcoat.2005.10.011 ↗
23. A. Aygun, A.L. Vasiliev, N.P. Padture, and X. Ma, Novel Thermal Barrier Coatings that Are Resistant to High-Temperature Attack by Glassy Deposits, Acta Mater., 2007, 55, p 673410.1016/j.actamat.2007.08.028 ↗
24. R. Vassen, X. Cao, F. Tietz, D. Basu, and D. Stover, Zirconates as New Materials for Thermal Barrier Coatings, J. Am. Ceram. Soc., 2000, 83(8), p 2023-202810.1111/j.1151-2916.2000.tb01506.x ↗
25. S. Kramer, J. Yang, and C.G. Levi, Infiltration-Inhibiting Reaction of Gadolinium Zirconate Thermal Barrier Coatings with CMAS Melts, J. Am. Ceram. Soc., 2008, 91(2), p 576-58310.1111/j.1551-2916.2007.02175.x ↗
26. L. Besra, C. Compson, and M. Liu, Electrophoretic Deposition on Non-Conducting Substrates: The Case of YSZ film on NiO-YSZ Composite Substrates for Solid Oxide Fuel Cell Application, J. Power Sour., 2007, 173, p 130-13610.1016/j.jpowsour.2007.04.061 ↗
27. S.T. Aruna and K.S. Rajam, A Study on the Electrophoretic Deposition of 8YSZ Coating Using Mixture of Acetone and Ethanol Solvents, Mater. Chem. Phys., 2008, 111, p 131-13610.1016/j.matchemphys.2008.03.035 ↗
28. O.O. Van der Biest and L.J. Vandeperre, Electrophoretic Deposition of Materials, Annl. Rev. Mater. Sci., 1999, 29, p 327-35210.1146/annurev.matsci.29.1.327 ↗
29. L. Besra and M. Liu, A Review on Fundamentals and Applications of Electrophoretic Deposition (EPD), Prog. Mater. Sci., 2007, 52, p 1-6110.1016/j.pmatsci.2006.07.001 ↗