Net Shape Fins for Compact Heat Exchanger Produced by Cold Spray
Source abstract
Abstract
This work explores the manufacturability of pyramidal fin arrays produced using the cold spray process. Near-net shaped pyramidal fin arrays of various sizes and fin densities were manufactured using masks made of commercially available steel wire mesh. The feedstock powders used to produce the fins are characterized using scanning electron microscopy. Obstruction of the masks was investigated. The standoff distances between the substrate, mesh, and nozzle were empirically determined. Fin array characterization was performed using digital microscopy. The fin arrays’ heat transfer performance was assessed experimentally for a range of Reynolds number relevant to the application sought. The fins produced using the cold spray process outperform traditional straight (rectangular) fins at the same fin density and it is hypothesized that this is due to increased fluid mixing and turbulence.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Fluid Dynamics and Heat Transfer · Particle Dynamics in Fluid Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. A.B. Lovins, Small is Profitable: The Hidden Economic Benefits of Making Electrical Resources the Right Size, Rocky Mountain Institute, 200210.1016/S1471-0846(03)80111-7 ↗
2. S.M. Kaplan and F. Sissine, Smart Grid: Modernizing Electric Power Transmission and Distribution; Energy Independence, Storage and Security; Energy Independence and Security Act and Resiliency; Integra, TheCapitol.Net Inc., 2009
3. A. Corbeil, “Study of Small Hydraulic Diameter Media for Improved Heat Exchanger,” M.A.Sc. Thesis, University of Ottawa, 2009
4. D. Bohn, Micro Gas Turbine and Fuel Cell: A Hybrid Energy Conversion System with High Potential, NATO Research and Technology Organisation, 2005
5. J. Tian, T. Kim, T.J. Lu, H.P. Hodson, D.T. Queheillalt, D.J. Sypeck, and H.N.G. Wadley, The Effects of Topology Upon Fluid-Flow and Heat-Transfer Within Cellular Copper Structures, Int. J. Heat Mass Transf., 2004, 47(14-16), p 3171-318610.1016/j.ijheatmasstransfer.2004.02.010 ↗
6. Z. Anxionnaz, M. Cabassud, C. Gourdon, and P. Tochon, Heat Exchanger/Reactors (HEX Reactors): Concepts, Technologies: State-of-the-Art, Chem. Eng. Process., 2008, 47(12), p 2029-205010.1016/j.cep.2008.06.012 ↗
7. R.L. Shaner, Heat Exchanger Having Metal Wire Screens, and Method of Making Stack of Screens Therefor, US4840228, Year of Priority (Issued): 1985, 1989
8. J. Chisholm, Method of Making a Crimped Wire Mesh Heat Exchanger/Sink, US4843693, Year of Priority (Issued): 1988, 1989
9. J. Assad, A. Corbeil, P. Richer, and B. Jodoin, Novel Stacked Wire Mesh Compact Heat Exchangers Produced Using Cold Spray, J. Therm. Spray Technol., 2011, 20(6), p 1192-120010.1007/s11666-011-9663-8 ↗
10. H.R. Salimi Jazi, J. Mostaghimi, S. Chandra, L. Pershin, and T. Coyle, Spray-Formed, Metal-Foam Heat Exchangers for High Temperature Applications, J. Thermal Sci. Eng. Appl., 2009, 1(3), p 1-7
11. F. Azarmi, J. Saaedi, T.W. Coyle, and J. Mostaghimi, Microstructure Characterization of Alloy 625 Deposited on Nickel Foam Using Air Plasma Spraying, Adv. Eng. Mater., 2008, 10(5), p 459-46510.1002/adem.200700196 ↗
12. A.P. Alkhimov, A.N. Papyrin, V.F. Dosarev, N.I. Nesterovich, and M.M. Shuspanov, Gas-Dynamic Spraying Method for Applying a Coating, US5302414, Year of Priority (Issued): 1992, 1994
13. A.O. Tokarev, Structure of Aluminum Powder Coatings Prepared by Cold Gas-Dynamic Spraying, Met. Sci. Heat Treat., 1996, 38(3-4), p 136-13910.1007/BF01401446 ↗
14. Plasma Giken, http://www.plasma.co.jp/en/ , Consulted November 2012
15. F.P. Incropera, D.P. DeWitt, T.L. Bergman, and A.S. Lavine, Fundamentals of Heat and Mass Transfer, 6th ed., Wiley, New York, 2006
16. T. Schmidt, F. Gärtner, H. Assadi, and H. Kreye, Development of a Generalised Parameter Window for Cold Spray Deposition, Acta Mater., 2006, 54, p 729-74210.1016/j.actamat.2005.10.005 ↗
17. H. Assadi, T. Schmidt, H. Richter, J.-O. Kliemann, K. Binder, F. Gärtner, T. Klassen, and H. Kreye, On Parameter Selection in Cold Spraying, J. Therm. Spray Technol., 2011, 20(6), p 1161-117610.1007/s11666-011-9662-9 ↗
18. H.W. Coleman and W.G. Steele, Experimentation and Uncertainty Analysis for Engineers, Wiley, New York, 1999
19. W.M. Kays and A.L. London, Compact Heat Exchangers, 3rd ed., McGraw-Hill, New York, 1984