journal article·2015-06

Morphology and Size Evolution of Interlamellar Two-Dimensional Pores in Plasma-Sprayed La2Zr2O7 Coatings During Thermal Exposure at 1300 °C

Tao Liu, Xiao-Tao Luo, Xu Chen, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li

Publisher page

Abstract

La2Zr2O7 (LZO) is widely expected to be one of the promising thermal barrier coating materials for application in high-temperature conditions (1200 °C). However, high-temperature exposure causes sintering which heals interlamellar two-dimensional (2D) pores and intrasplat pores. This sintering effect increases the stiffness and thermal conductivity of thermal barrier coatings, consequently reducing their durability. In this study, to reveal the possible critical opening of 2D pores above which they are free from sintering, LZO coating and splat were deposited by atmospheric plasma spraying and were exposed to 1300 °C for different durations. Thereafter, the evolution of the parameters of residual 2D pores in the coating and the surface morphology of LZO splat were characterized. It was found that there is a critical opening width for 2D pores above which grain bridging does not occur across the gaps. Accordingly, pores with an opening larger than this critical width are free from sintering across the 2D pores despite surface roughening of splats, whereas pores with an opening less than the critical width sinter rapidly at the early stage of thermal exposure through the formation of grain bridges.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Particle Dynamics in Fluid Flows · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. A. Feuerstein, J. Knapp, T. Taylor, A. Ashary, A. Bolcavage, and N. Hitchman, Technical and Economical Aspects of Current Thermal Barrier Coating Systems for Gas Turbine Engines by Thermal Spray and EBPVD, A Review, J. Therm. Spray Technol., 2008, 17(2), p 199-21310.1007/s11666-007-9148-y ↗
2. N.P. Padture, M. Gell, and E.H. Jordan, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, 2002, 296, p 280-28410.1126/science.1068609 ↗
3. C.U. Hardwickre and Y.C. Lau, Advances in Thermal Spray Coatings for Gas Turbines and Energy Generation: A Review, J. Therm. Spray Technol., 2013, 22(5), p 564-57610.1007/s11666-013-9904-0 ↗
4. G.J. Yang, Z.L. Chen, C.X. Li, and C.-J. Li, Microstructural and Mechanical Property Evolutions of Plasma-Sprayed YSZ Coating during High-Temperature Exposure: Comparison Study Between 8YSZ and 20YSZ, J. Therm. Spray Technol., 2013, 22(8), p 1294-130210.1007/s11666-013-9986-8 ↗
5. U. Schulz, Phase Transformation in EB-PVD Yttria Partially Stabilized Zirconia Thermal Barrier Coatings during Annealing, J. Am. Ceram. Soc., 2000, 83(4), p 904-91010.1111/j.1151-2916.2000.tb01292.x ↗
6. D. Stover, G. Pracht, H. Lehmann, M. Dietrich, J.E. Doring, and R. Vassen, New Material Concepts for the Next Generation of Plasma-Sprayed Thermal Barrier Coatings, J. Therm. Spray Technol., 2004, 13(1), p 76-8310.1007/s11666-004-0052-4 ↗
7. C. Friedrich, R. Gadow, and T. Schirmer, Lanthanum Hexaaluminate—A New Material for Atmospheric Plasma Spraying of Advanced Thermal Barrier Coatings, J. Therm. Spray Technol., 2001, 10(4), p 592-59810.1361/105996301770349105 ↗
8. H.B. Guo, Y. Wang, L. Wang, and S.K. Gong, Thermo-Physical Properties and Thermal Shock Resistance of Segmented La2Ce2O7/YSZ Thermal Barrier Coatings, J. Therm. Spray Technol., 2009, 18(4), p 665-67110.1007/s11666-009-9350-1 ↗
9. N. Curry, N. Markocsan, L. Ostergren, X.H. Li, and M. Dorfman, Evaluation of the Lifetime and Thermal Conductivity of Dysprosia-Stabilized Thermal Barrier Coating Systems, J. Therm. Spray Technol., 2013, 22(6), p 864-87210.1007/s11666-013-9932-9 ↗
10. J. Wu, X.Z. Wei, N.P. Padture, P.G. Klemens, M. Gell, E. Garcia, E. Garcia, P. Miranzo, and M.I. Osendi, Low-Thermal-Conductivity Rare-Earth Zirconates for Potential Thermal-Barrier-Coating Applications, J. Am. Ceram. Soc., 2002, 85(12), p 3031-303510.1111/j.1151-2916.2002.tb00574.x ↗
11. R. Vassen, X.Q. Cao, F. Tietz, D. Basu, and D. Stover, Zirconates as New Materials for Thermal Barrier Coatings, J. Am. Ceram. Soc., 2000, 83(8), p 2023-202810.1111/j.1151-2916.2000.tb01506.x ↗
12. C.-J. Li and W.Z. Wang, Quantitative Characterization of Lamellar Microstructure of Plasma-Sprayed Ceramic Coatings Through Visualization of Void Distribution, Mater. Sci. Eng. A, 2004, 386, p 10-1910.1016/S0921-5093(04)00900-1 ↗
13. C.-J. Li, A. Ohmori, and R. McPherson, The Relationship Between Microstructure and Young Modulus of Thermally Sprayed Ceramic Coatings, J. Mater. Sci., 1997, 32, p 997-100410.1023/A:1018574221589 ↗
14. C.-J. Li and A. Ohmori, Relationships between the Microstructure and Properties of Thermally Sprayed Deposits, J. Therm. Spray Technol., 2002, 11(3), p 365-37410.1361/105996302770348754 ↗
15. R. McPherson, A Review on Microstructure and Properties of Plasma Sprayed Ceramic Coatings, Surf. Coat. Technol., 1989, 39–40, p 173-18110.1016/0257-8972(89)90052-2 ↗
16. R. McPherson, The Relationship between the Mechanism of Formation Microstructure and Properties of Plasma-Sprayed Coatings, Thin Solid Films, 1981, 83, p 297-31010.1016/0040-6090(81)90633-7 ↗
17. R. McPherson, A Model for the Thermal Conductivity of Plasma-Sprayed Ceramic Coatings, Thin Solid Films, 1984, 112, p 89-9510.1016/0040-6090(84)90506-6 ↗
18. J.A. Thompson and T.W. Clyne, The Effect of Heat Treatment on the Stiffness of Zirconia Top Coats in Plasma-Sprayed TBCs, Acta Mater., 2001, 49, p 1567-157510.1016/S1359-6454(01)00065-9 ↗
19. R. Dutton, R. Wheeler, K.S. Ravichandran, and K. An, Effect of Heat Treatment on the Thermal Conductivity of Plasma-Sprayed Thermal Barrier Coatings, J. Therm. Spray Technol., 2000, 9(2), p 204-20910.1361/105996300770349935 ↗
20. N. Curry, W. Janikowski, Z. Pala, M. Vilemova, and N. Markocsan, Impact of Impurity Content on the Sintering Resistance and Phase Stability of Dysprosia- and Yttria-Stabilized Zirconia Thermal Barrier Coatings, J. Therm. Spray Technol., 2014, 23(1–2), p 160-16910.1007/s11666-013-0014-9 ↗
21. H.J. Ratzer-Scheibe and U. Schulz, The Effects of Heat Treatment and Gas Atmosphere on the Thermal Conductivity of APS and EB-PVD PYSZ Thermal Barrier Coatings, Surf. Coat. Technol., 2007, 201, p 7880-788810.1016/j.surfcoat.2007.03.028 ↗
22. F. Cernuschi, P.G. Bison, S. Marinetti, and P. Scardic, Thermophysical, Mechanical and Microstructural Characterization of Aged Free-Standing Plasma-Sprayed Zirconia Coatings, Acta Mater., 2008, 56, p 4477-448810.1016/j.actamat.2008.04.067 ↗
23. C.-J. Li and J.L. Li, Evaporated-Gas-Induced Splashing Model for Splat Formation during Plasma Spraying, Surf. Coat. Technol., 2004, 184, p 13-2310.1016/j.surfcoat.2003.10.048 ↗
24. S. Zhao, Y. Zhao, B.L. Zou, X.Z. Fan, J.Y. Xu, Y. Hui, X. Zhou, S.X. Liu, and X.Q. Cao, Characterization and Thermal Cycling Behavior of La2(Zr0.7Ce0.3)2O7/8YSZ Functionally Graded Thermal Barrier Coating Prepared by Atmospheric Plasma Spraying, J. Alloys Compd., 2014, 592, p 109-11410.1016/j.jallcom.2014.01.001 ↗
25. Y. Wang, H.B. Guo, and S.K. Gong, Thermal Shock Resistance and Mechanical Properties of La2Ce2O7 Thermal Barrier Coatings with Segmented Structure, Ceram. Int., 2009, 35, p 2639-264410.1016/j.ceramint.2009.02.025 ↗
26. H.F. Chen, Y. Liu, Y.F. Gao, S.Y. Tao, and H.J. Luo, Design, Preparation, and Characterization of Graded YSZ/La2Zr2O7 Thermal Barrier Coatings, J. Am. Ceram. Soc., 2010, 93(6), p 1732-174010.1111/j.1551-2916.2010.03610.x ↗
27. X.Q. Cao, R. Vassen, F. Tietz, and D. Stoever, New Double-Ceramic-Layer Thermal Barrier Coatings Based on Zirconia-Rare Earth Composite Oxides, J. Eur. Ceram. Soc., 2006, 26, p 247-25110.1016/j.jeurceramsoc.2004.11.007 ↗
28. C.-J. Li, G.J. Yang, and C.X. Li, Development of Particle Interface Bonding in Thermal Spray Coating: A Review, J. Therm. Spray Technol., 2013, 22(2–3), p 192-206
29. K.A. Erk, C. Deschaseaux, and R.W. Trice, Grain-Boundary Grooving of Plasma-Sprayed Yttria-Stabilized Zirconia Thermal Barrier Coatings, J. Am. Ceram. Soc., 2006, 89(5), p 1673-167810.1111/j.1551-2916.2006.00944.x ↗