Porous Architecture of SPS Thick YSZ Coatings Structured at the Nanometer Scale (~50 nm)
Source abstract
Abstract
Suspension plasma spraying (SPS) is a fairly recent technology that is able to process sub-micrometersized or nanometer-sized feedstock particles and permits the deposition of coatings thinner (from 20 to 100 lm) than those resulting from conventional atmospheric plasma spraying (APS). SPS consists of mechanically injecting within the plasma flow a liquid suspension of particles of average diameter varying between 0.02 and 1 lm. Due to the large volume fraction of the internal interfaces and reduced size of stacking defects, thick nanometer- or sub-micrometer-sized coatings exhibit better properties than conventional micrometer-sized ones (e.g., higher coefficients of thermal expansion, lower thermal diffusivity, higher hardness and toughness, better wear resistance, among other coating characteristics and functional properties). They could hence offer pertinent solutions to numerous emerging applications, particularly for energy production, energy saving, etc. Coatings structured at the nanometer scale exhibit nanometer-sized voids. Depending upon the selection of operating parameters, among which plasma power parameters (operating mode, enthalpy, spray distance, etc.), suspension properties (particle size distribution, powder mass percentage, viscosity, etc.), and substrate characteristics (topology, temperature, etc.), different coating architectures can be manufactured, from dense to porous layers, from connected to non-connected network. Nevertheless, the discrimination of porosity in different classes of criteria such as size, shape, orientation, specific surface area, etc., is essential to describe the coating architecture. Moreover, the primary steps of the coating manufacturing process affect significantly the coating porous architecture. These steps need to be further understood. Different types of imaging experiments were performed to understand, describe and quantify the pore level of thick finely structured ceramics coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. E. Brousse, G. Montavon, P. Fauchais, A. Denoirjean, V. Rat, J.-F. Coudert, and H. Ageorges, Thin and Dense Yttria-Partially Stabilized Zirconia Electrolytes for IT-SOFC Manufactured by Suspension Plasma Spraying, Thermal Spray Crossing Borders, E. Lugscheider, Ed., June 2-4, 2008 (Maastricht, The Netherlands), DVS, Düsseldorf, Germany, 2008, p 547-55210.31399/asm.cp.itsc2008p0535 ↗
2. P. Fauchais, Understanding Plasma Spraying, J. Phys. D: Appl. Phys., 2004, 37, p R86-R10810.1088/0022-3727/37/9/R02 ↗
3. K. Wittman, F. Blein, J. Fazilleau, J.-F. Coudert, and P. Fauchais, A New Process to Deposit Thin Coatings by Injecting Nanoparticles Suspension in a DC Plasma Jet, Tagungsband Conference Proceedings, E. Lugscheider, Ed., DVS, Düsseldorf, Germany, 2002, p 519-52210.31399/asm.cp.itsc2002p0519 ↗
4. P. Padture, K. Schlichting, T. Bhatia, A. Ozturk, B. Cetengen, E. Jordan, M. Gell, S. Jiang, P. Strutt, E. Garcia, P. Miranzo, and M. Osendi, Towards Durable Thermal Barrier Coatings with Novel Microstructures Deposited by Solution-Precursor Plasma Spray, Acta Mater., 2001, 49, p 2251-225710.1016/S1359-6454(01)00130-6 ↗
5. L. Pawlowski and P. Fauchais, Thermal Transport Properties of Thermally Sprayed Coatings, Int. Mater. Rev., 1992, 36, p 271-28910.1179/imr.1992.37.1.271 ↗
6. G. Antou, G. Montavon, F. Hlawka, A. Cornet, C. Coddet, and F. Machi, Evaluation of Modifications Induced on Pore Network and Structure of Partially Stabilized Zirconia Manufactured by Hybrid Plasma Spray Process, Surf. Coat. Technol., 2004, 180-181, p 627-63210.1016/j.surfcoat.2003.10.155 ↗
7. L. Bianchi, “D.C. and R.F. Plasma Spraying of Ceramic Coatings: Mechanism of the Formation of the First Layer and Its Link with Coatings Properties,” Ph.D. Thesis, University of Limoges, France, 1995 (in French)
8. O. Tingaud, A. Grimaud, A. Denoirjean, G. Montavon, V. Rat, J.-F. Coudert, P. Fauchais, and T. Chartier, Suspension Plasma-Sprayed Alumina Coating Structures: Operating Parameters vs. Coating Architecture, Thermal Spray Crossing Borders, E. Lugscheider, Ed., June 2-4, 2008 (Maastricht, The Netherlands), DVS, Düsseldorf, Germany, 2008, p 323-32810.31399/asm.cp.itsc2008p0311 ↗
9. J. Fazilleau, “Contribution to the Understanding of Phenomena Involved in Finely Structured Oxide Coatings Manufactured by Suspension Plasma Spraying,” Ph.D. Thesis, University of Limoges, France, 2003 (in French)
10. C. Delbos, “Contribution to the Understanding of Ceramic (YSZ, Perovskite, etc.) or Metallic (Ni, etc.) Particles Injection by a Liquid Carrier in a Plasma Jet to Manufacture Finely-Structured Coatings for SOFC,” Ph.D. Thesis, University of Limoges, France, 2004 (in French)
11. K. Wittmann, F. Blein, J.-F. Coudert, and P. Fauchais, Control of the Injection of an Alumina Suspension Containing Nanograins in a d.c. Plasma, Thermal Spray 2001 : New Surfaces for a New Millenium, C.C. Berndt, K.A. Kohr, and E. Lugscheider, Ed., ASM International, Materials Park, OH, 2001, p 519-52210.31399/asm.cp.itsc2001p0375 ↗
12. C. Monterrubio-Badillo, H. Ageorges, T. Chartier, J.-F. Coudert, and P. Fauchais, Preparation of LaMnO3 Perovskite Thin Films by Suspension Plasma Spraying for SOFC Cathodes, Surf. Coat. Technol., 2006, 12-13, p 3742-3756
13. P. Fauchais, V. Rat, J.-F. Coudert, T. Chartier, and L. Bianchi, Understanding of Suspension d.c. Plasma Spraying Finely Structured Coatings for SOFC, Plasma Sci. IEE Trans., 2005, 2, p 920-93010.1109/TPS.2005.845094 ↗
14. J.A. Curran and T.W. Clyne, Porosity in Plasma Electrolytic Oxide Coatings, Acta Mater., 2006, 54(7), p 1985-199310.1016/j.actamat.2005.12.029 ↗
15. J. Ilavsky, P.R. Jemian, A.J. Allen, F. Zhang, L.E. Levine, and G.G. Long, Ultra-Small-Angle X-Ray Scattering at the Advanced Photon Source, J. Appl. Crystallogr., 2009, 42, p 347-35310.1107/S0021889809002222 ↗
16. O. Glatter and O. Kratky, Small Angle X-Ray Scattering, Academic Press Inc., New York, 1982, p 54-81
17. T. Narayanan, Synchrotron Small-Angle X-Ray Scattering, Soft Matter Charact., 2008, 36, p 899-94810.1007/978-1-4020-4465-6_17 ↗
18. J. Ilavsky and P.R. Jemian, Irena: Tool Suite for Modeling and Analysis of Small-Angle Scattering, J. Appl. Crystallogr., 2009, 42, p 347-35310.1107/S0021889809002222 ↗