journal article·2015-02

Thermal Aging Behavior of Axial Suspension Plasma-Sprayed Yttria-Stabilized Zirconia (YSZ) Thermal Barrier Coatings

Yuexing Zhao, Liang Wang, Jiasheng Yang, Dachuan Li, Xinghua Zhong, Huayu Zhao, Fang Shao, Shunyan Tao

Publisher page

Abstract

7.5YSZ thermal barrier coatings (TBCs) were deposited onto the stainless steel substrates using axial suspension plasma spraying (ASPS). Free-standing coatings were isothermally aged in air from 1200 to 1600 °C for 24 h and at 1550 °C for 20 to 100 h, respectively. Thermal aging behavior such as phase composition, microstructure evolutions, grain growth, and mechanical properties for thermal-aged coatings were investigated. Results show that the as-sprayed metastable tetragonal (t′-ZrO2) phase decomposes into equilibrium tetragonal (t-ZrO2) and cubic (c-ZrO2) phases during high-temperature exposures. Upon further cooling, the c-ZrO2 may be retained or transform into another metastable tetragonal (t″-ZrO2) phase, and tetragonal → monoclinic phase transformation occurred after 1550 °C/40 h aging treatment. The coating exhibits a unique structure with segmentation cracks and micro/nano-size grains, and the grains grow gradually with increasing aging temperature and time. In addition, the hardness (H) and Young’s modulus (E) significantly increased as a function of temperature due to healing of pores or cracks and grain growth of the coating. And a nonmonotonic variation is found in the coatings thermal aged at a constant temperature (1550 °C) with prolonged time, this is a synergetic effect of coating sintering and m-ZrO2 phase formation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. N.P. Padture, M. Gell, and E.H. Jordan, Materials Science—Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, 2002, 296(5566), p 280-28410.1126/science.1068609 ↗
2. S.A. Tsipas and I.O. Golosnoy, Effect of Substrate Temperature on the Microstructure and Properties of Thick Plasma-Sprayed YSZ TBCs, J. Eur. Ceram. Soc., 2011, 31(15), p 2923-292910.1016/j.jeurceramsoc.2011.07.022 ↗
3. S. Bose and J. DeMasi-Marcin, Thermal Barrier Coating Experience in Gas Turbine Engines at Pratt & Whitney, J. Therm. Spray Technol., 1997, 6(1), p 99-10410.1007/BF02646318 ↗
4. N.P. Paduture, K.W. Schlichting, T. Bhatia, A. Ozturk, B. Cetegen, E.H. jordan, M. Gell, S. Jiang, T.D. Xiao, P.R. Strutt, E. Garcia, P. Miranzo, and M.I. Osendi, Towards Durable Thermal Barrier Coatings with Novel Microstructures Deposited by Solution Precursor Plasma Spray, Acta Mater., 2001, 49, p 2251-225710.1016/S1359-6454(01)00130-6 ↗
5. D.D. Hass, A.J. Slifka, and H.N.G. Wadley, Low Thermal Conductivity Vapor Deposited Zirconia Microstructures, Acta Mater., 2001, 49(6), p 973-98310.1016/S1359-6454(00)00403-1 ↗
6. A.F. Renteria, B. Saruhan, U. Schulz, H.-J. Raetzer-Scheibe, J. Haug, and A. Wiedenmann, Effect of Morphology on Thermal Conductivity of EB-PVD PYSZ TBCs, Surf. Coat. Technol., 2006, 201, p 2611-262010.1016/j.surfcoat.2006.05.003 ↗
7. D.Y. Chen, M. Gell, E.H. Jordan, E. Cao, and X.Q. Ma, Thermal Stability of Air Plasma Spray and Solution Precursor Plasma Apray Thermal Barrier Coatings, J. Am. Ceram. Soc., 2007, 90(10), p 3160-316610.1111/j.1551-2916.2007.01864.x ↗
8. Z. Tang, H. Kim, I. Yaroslavski, G. Masindo, Z. Celler, and D. Ellsworth, Novel Thermal Barrier Coatings Produced by Axial Suspension Plasma Spray, Proceedings of International Thermal Spray Conference and Exposition, Sept 27-29, 2011 (Hamburg, Germany), DVS Deutscher Verband für Schweißen, Vol 276, DVS Media GmbH, Düsseldorf, 2011, p 593-59710.31399/asm.cp.itsc2011p0571 ↗
9. H. Kassner, R. Siegert, D. Hathiramani, R. Vassen, and D. Stoever, Application of Suspension Plasma Spraying (SPS) for Manufacture of Ceramic Coatings, J. Therm. Spray Technol., 2008, 17(1), p 115-12310.1007/s11666-007-9144-2 ↗
10. S. Paul, A. Cipitria, S.A. Tsipas, and T.W. Clyne, Sintering Characteristics of Plasma Sprayed Zirconia Coatings Containing Different Stabilisers, Surf. Coat. Technol., 2009, 203(8), p 1069-107410.1016/j.surfcoat.2008.09.037 ↗
11. P.A. Langjahr, R. Oberacker, and M.J. Hoffmann, Long-Term Behavior and Application Limits of Plasma-Sprayed Zirconia Thermal Barrier Coatings, J. Am. Ceram. Soc., 2001, 84(6), p 1301-130810.1111/j.1151-2916.2001.tb00833.x ↗
12. R.W. Trice, Y.J. Su, J.R. Mawdsley, K.T. Faber, A.R. De Arellano-Lopez, H. Wang, and W.D. Porter, Effect of Heat Treatment on Phase Stability, Microstructure, and Thermal Conductivity of Plasma-Sprayed YSZ, J. Mater. Sci., 2002, 37(11), p 2359-236510.1023/A:1015310509520 ↗
13. F. Cernuschi, P.G. Bison, S. Marinetti, and P. Scardi, Thermophysical, Mechanical and Microstructural Characterization of Aged Free-Standing Plasma-Sprayed Zirconia Coatings, Acta Mater., 2008, 56(16), p 4477-448810.1016/j.actamat.2008.04.067 ↗
14. J.R. Brandon and R. Taylor, Phase Stabifity of Zirconia-Based Thermal Barrier Coatings Part I. Zirconia-Yttria Alloys, Surf. Coat. Technol., 1991, 46, p 75-9010.1016/0257-8972(91)90151-L ↗
15. G. Witz, V. Shklover, W. Steurer, S. Bachegowda, and H.P. Bossmann, Phase Evolution in Yttria-Stabilized Zirconia Thermal Barrier Coatings Studied by Rietveld Refinement of X-ray Powder Diffraction Patterns, J. Am. Ceram. Soc., 2007, 90(9), p 2935-294010.1111/j.1551-2916.2007.01785.x ↗
16. J. Luo, S. Adak, and R. Stevens, Microstructure Evolution and Grain Growth in the Sintering of 3Y-TZP Ceramics, J. Mater. Sci., 1998, 33(22), p 5301-530910.1023/A:1004481813393 ↗
17. R. Ahmadi-Pidani, R. Shoja-Razavi, R. Mozafarinia, and H. Jamali, Improving the Thermal Shock Resistance of Plasma Sprayed CYSZ Thermal Barrier Coatings by Laser Surface Modification, Opt. Lasers Eng., 2012, 50(5), p 780-78610.1016/j.optlaseng.2011.12.007 ↗
18. U. Schulz, Phase Transformation in EB-PVD Yttria Partially Stabilized Zirconia Thermal Barrier Coatings During Annealing, J. Am. Ceram. Soc., 2000, 83(4), p 904-91010.1111/j.1151-2916.2000.tb01292.x ↗
19. B. Liang, C.X. Ding, H.L. Liao, and C. Coddet, Phase Composition and Stability of Nanostructured 4.7 wt.% Yttria-Stabilized Zirconia Coatings Deposited by Atmospheric Plasma Spraying, Surf. Coat. Technol., 2006, 200(14–15), p 4549-455610.1016/j.surfcoat.2005.03.034 ↗
20. K. Muraleedharan, J. Subrahmanyam, and S.B. Bhaduri, Identification of t′ Phase in ZrO2-7.5 wt.% Y2O3 Thermal-Barrier Coatings, J. Am. Ceram. Soc., 1998, 71(5), p 226-227
21. J. Moon, H. Choi, H. Kim, and C. Lee, The Effects of Heat Treatment on the Phase Transformation Behavior of Plasma-Sprayed Stabilized ZrO2 Coatings, Surf. Coat. Technol., 2002, 155, p 1-1010.1016/S0257-8972(01)01661-9 ↗
22. Y.X. Zhao, D.C. Li, X.H. Zhong, H.Y. Zhao, L. Wang, F. Shao, C.G. Liu, and S.Y. Tao, Thermal Shock Behaviors of YSZ Thick Thermal Barrier Coatings Fabricated by Suspension and Atmospheric Plasma Spraying, Surf. Coat. Technol., 2014, 249(25), p 48-55
23. A. Kulkarni, A. Goland, H. Herman, A.J. Allen, T. Dobbins, F. DeCarlo, J. Ilavsky, G.G. Long, S. Fang, and P. Lawton, Advanced Neutron and X-Ray Techniques for Insights into the Microstructure of EB-PVD Thermal Barrier Coatings, Mater. Sci. Eng. A, 2006, 426(1–2), p 43-5210.1016/j.msea.2006.03.070 ↗
24. A.J. Allen, G.G. Long, H.M. Kerch, S. Krueger, G. Skandan, H. Hahn, and J.C. Parker, Sintering Studies of Nanophase Ceramic Oxides Using Small Angle Scattering, Ceram. Int., 1996, 22(4), p 275-28010.1016/0272-8842(96)84747-X ↗
25. A. Shinmi, X. Zhao, and P. Xiao, Mechanical and Electrical Characterisation of a Phase Transformation in Thermal Barrier Coatings, Surf. Coat. Technol., 2010, 205(7), p 2678-268610.1016/j.surfcoat.2010.10.038 ↗
26. P. Carpio, E. Rayon, L. Pawlowski, A. Cattini, R. Benavente, E. Bannier, M.D. Salvador, and E. Sanchez, Microstructure and Indentation Mechanical Properties of YSZ Nanostructured Coatings Obtained by Suspension Plasma Spraying, Surf. Coat. Technol., 2013, 220, p 237-24310.1016/j.surfcoat.2012.09.047 ↗
27. Z.L. Wu, L.Y. Ni, Q.H. Yu, and C.G. Zhou, Effect of Thermal Exposure on Mechanical Properties of a Plasma-Sprayed Nanostructured Thermal Barrier Coating, J. Therm. Spray Technol., 2012, 21(1), p 169-17510.1007/s11666-011-9704-3 ↗
28. S.Q. Guo and Y. Kagawa, Effect of Thermal Exposure on Hardness and Young’s Modulus of EB-PVD Yttria-Partially-Stabilized Zirconia Thermal Barrier Coatings, Ceram. Int., 2006, 32(3), p 263-27010.1016/j.ceramint.2005.01.018 ↗
29. G.J. Yang, Z.L. Chen, C.X. Li, and C.J. Li, Microstructural and Mechanical Property Evolutions of Plasma-Sprayed YSZ Coating During High-Temperature Exposure: Comparison Study Between 8YSZ and 20YSZ, J. Therm. Spray Technol., 2013, 22(8), p 1294-130210.1007/s11666-013-9986-8 ↗