Thin and Dense Ceramic Coatings by Plasma Spraying at Very Low Pressure
Source abstract
Abstract
Abstract Very low pressure plasma spraying (VLPPS) processes operate at a pressure of approximately 100 Pa, where the interaction of the plasma jet with the surrounding atmosphere is very weak and, as a result, plasma velocity is almost constant over a long distance from the nozzle exit. At these low pressures, the collision frequency is distinctly reduced and the mean free path is strongly increased. As a consequence, the specific enthalpy of the plasma is substantially higher, but at lower density. These particular plasma characteristics offer enhanced possibilities to spray thin and dense ceramics compared to conventional processes which operate in the pressure range between 5 and 20 kPa. This paper presents examples of gas-tight and electrically insulating layers with thicknesses less than 50 μm for solid oxide fuel cell applications. Plasma spraying of oxygen conducting membrane materials like perovskite is also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. J.-L. Dorier, M. Gindrat, C. Hollenstein, M. Loch, A. Refke, A. Salito, and G. Barbezat, Plasma Jet Properties in a New Spraying Process at Low Pressure for Large Area Thin Film Deposition, Thermal Spray 2001: New Surfaces for a New Millennium, C.C. Berndt, K.A. Khor, and E.F. Lugscheider, Ed., May 28-30, 2001 (Singapore), ASM International, 2001, p 759-76410.31399/asm.cp.itsc2001p0759 ↗
2. B. Jodoin, M. Gindrat, J.-L. Dorier, C. Hollenstein, M. Loch, and G. Barbezat, Modelling and Diagnostics of a Supersonic DC Plasma Jet Expanding at Low Pressure, International Thermal Spray Conference, E. Lugscheider and C.C. Berndt, Ed., March 04-06, 2002 (Essen, Germany), Verlag für Schweißen und verwandte Verfahren DVS-Verlag, 2002, p 716-72010.31399/asm.cp.itsc2002p0716 ↗
3. M. Gindrat, J.-L. Dorier, C. Hollenstein, M. Loch, A. Refke, A. Salito, and G. Barbezat, Effect of Specific Operating Conditions on the Properties of LPPS Plasma Jets Expanding at Low Pressure, International Thermal Spray Conference, E. Lugscheider and C.C. Berndt, Ed., March 04-06, 2002 (Essen, Germany), Verlag für Schweißen und verwandte Verfahren DVS-Verlag, 2002, p 459-46410.31399/asm.cp.itsc2002p0459 ↗
4. C. Verdy, C. Zhang, D. Sokolov, H. Liao, D. Klein, and C. Coddet, Gas-tight Coatings Produced by Very Low Pressure Plasma Spraying, Thermal Spray 2008: Thermal Spray Crossing Borders, on CD-ROM, E. Lugscheider, Ed., June 02-04, 2008 (Maastricht, The Netherlands), Verlag für Schweißen und verwandte Verfahren, 2008, p 398-40210.31399/asm.cp.itsc2008p0386 ↗
5. A. Refke, M. Gindrat, K. von Niessen, and R. Damani, LPPS Thin Film: A Hybrid Coating Technology between Thermal Spray and PVD for Functional Thin Coatings and Large Area Applications, Thermal Spray 2007: Global Coating Solutions, on CD-ROM, B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, and G. Montavon, Ed., May 14-16, 2007 (Beijing, China), ASM International, 2007, p 705-71010.31399/asm.cp.itsc2007p0705 ↗
6. M. Gindrat, A. Refke, and R. Schmid, Process Characterization of LPPS Thin Film Processes with Optical Diagnostics, Thermal Spray 2007: Global Coating Solutions, on CD-ROM, B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, and G. Montavon, Ed., May 14-16, 2007 (Beijing, China), ASM International, 2007, p 826-83110.31399/asm.cp.itsc2007p0826 ↗
7. R. Vaβen and D. Stöver, Development of Thin and Gastight Ceramic Coatings by Atmospheric Plasma-spraying, Thermal Spray 2006: Thermal Spray: Building on 100 Years of Success, on CD-ROM, B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, and J. Voyer, Ed., May 15-18, 2006 (Seattle, USA), 2006
8. C. Zhang, H. Liao, M. Planche, C. Coddet, C.-X. Li, G.-J. Yang, and C.-J. Li, Study on Gas Permeation Behavior Through Atmospheric Plasma-sprayed Yttria Stabilized Zirconia Coating, Thermal Spray 2008: Thermal Spray Crossing Borders, on CD-ROM, E. Lugscheider, Ed., June 02-04, 2008 (Maastricht, The Netherlands), Verlag für Schweißen und verwandte Verfahren DVS Verlag, 2008, p 410-41510.31399/asm.cp.itsc2008p0398 ↗
9. C. Monterrubio-Badillo, H. Ageorges, T. Chartier, J.F. Coudert, and P. Fauchais, Preparation of LaMnO3 Perovskite Thin Films by Suspension Plasma Spraying for SOFC Cathodes, Surf. Coat. Tech., 2006, 200(12-13), p 3743-375610.1016/j.surfcoat.2005.01.002 ↗
10. A. Ansar, G. Schiller, O. Patz, J. B. Gregoire, and Z. Ilhan, Plasma Sprayed Oxygen Electrode for Solid Oxide Fuel Cells and High Temperature Electrolyzers, 8th European Solid Oxide Fuel Cell Forum, on CD-ROM, June 30-July 04, 2008 (Luzern, Switzerland), p B1306
11. R. Henne, Solid Oxide Fuel Cells: A Challenge for Plasma Deposition Processes, J. Therm. Spray Techn., 2007, 16(3), p 381-40310.1007/s11666-007-9053-4 ↗
12. A. Refke, G. Barbezat, D. Hawley, and R.K. Schmid, Low Pressure Plasma Spraying (LPPS) as a Tool for the Deposition of Functional SOFC Components, Thermal Spray 2004: Advances in Technology and Application, on CD-ROM, May 10-12, 2004 (Osaka, Japan), Verlag für Schweißen und verwandte Verfahren DVS-Verlag, 2004, Applications III, p 26-3010.31399/asm.cp.itsc2004p0061 ↗
13. D. Stöver, D. Hathiramani, R. Vaßen, and R.J. Damani, Plasma-sprayed Components for SOFC Applications, Surf. Coat. Tech., 2006, 201(5), p 2002-200510.1016/j.surfcoat.2006.04.039 ↗
14. R. Vaßen, D. Hathiramani, J. Mertens, V.A.C. Haanappel, and I.C. Vinke, Manufacturing of High Performance Solid Oxide Fuel Cells (SOFCs) with Atmospheric Plasma Spraying (APS), Surf. Coat. Tech., 2007, 202(3), p 499-50810.1016/j.surfcoat.2007.06.064 ↗
15. R. Vaßen, A. Hospach, D. Hathiramani, J. Mertens, V. Haanappel, I.C. Vinke, and D. Stöver, High Performance Solid Oxide Fuel Cells (SOFCs) Made by Atmospheric Plasma Spraying (APS), Thermal Spray 2008: Thermal Spray Crossing Borders, on CD-ROM, E. Lugscheider, Ed., June 02-04, 2008 (Maastricht, The Netherlands), Verlag für Schweißen und verwandte Verfahren DVS Verlag, 2008, p 110-11510.31399/asm.cp.itsc2008p0098 ↗
16. M. Gindrat, A. Refke, and R. Damani, APS-Triplex and LPPS-Thin Film as Advanced Plasma Spraying Technologies for Industrialization of SOFC Components, Thermal Spray 2008: Thermal Spray Crossing Borders, on CD-ROM, E. Lugscheider, Ed., June 02-04, 2008 (Maastricht, The Netherlands), Verlag für Schweißen und verwandte Verfahren DVS Verlag, 2008, p 100-10510.31399/asm.cp.itsc2008p0088 ↗
17. J. Arnold, S.A. Ansar, U. Maier, and R. Henne, Insulating and Sealing of SOFC Devices by Plasma Sprayed Ceramic Layers, Thermal Spray 2008: Thermal Spray Crossing Borders, on CD-ROM, E. Lugscheider, Ed., June 02-04, 2008 (Maastricht, The Netherlands), Verlag für Schweißen und verwandte Verfahren DVS Verlag, 2008, p 95-9910.31399/asm.cp.itsc2008p0083 ↗
18. A. Hospach, U. Maier, and R. Vaßen, Development of a Thermally Sprayed Insulation Layer for SOFCs, 8th European Solid Oxide Fuel Cell Forum, on CD-ROM, June 30-July 04, 2008 (Luzern, Switzerland), p A0907