Liquid Precursor Plasma Spraying: Modeling the Interactions Between the Transient Plasma Jet and the Droplets
Source abstract
Abstract
Abstract Plasma spraying using liquid feedstock makes it possible to produce thin coatings (< 100 µm) with more refined microstructures than in conventional plasma spraying. However, the low density of the feedstock droplets makes them very sensitive to the instantaneous characteristics of the fluctuating plasma jet at the location where they are injected. In this study the interactions between the fluctuating plasma jet and droplets are explored by using numerical simulations. The computations are based on a three-dimensional and time-dependent model of the plasma jet that couples the dynamic behavior of the arc inside the torch and the plasma jet issuing from the plasma torch. The turbulence that develops in the jet flow issuing in air is modeled by a Large Eddy Simulation model that computes the largest structures of the flow which carry most of the energy and momentum.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Dust and Plasma Wave Phenomena · Particle Dynamics in Fluid Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. C.C. Berndt, A.H. King, T. Chraska, and J. Karthikeyan, Plasma Spray Synthesis of Nanomaterials, http://www.matscieng.sunysb.edu/ctsr/nuggets/nugget1/index.html , 1997
2. P.F. Blazdell, S. Kuroda, Plasma Spraying of Submicron Ceramic Suspensions Using a Continuous Ink Jet Printer, Surf. Coat. Technol., 2000, 123, p 239-24610.1016/S0257-8972(99)00440-5 ↗
3. C. Delbos, Understanding the Injection of Metal or Ceramics Suspensions in a DC plasma jet, Ph.D Thesis, in French, University of Limoges, France, 2004
4. R. Etchart-Salas, V. Rat, J.F. Coudert, P. Fauchais, and G. Lafougère, Influence of Arc Instabilities on the Injection in Suspension Plasma Spraying, High Technol. Plasma Processes, 2006, 9, May 29-June 4 (St-Petersburg, Russia)
5. A. Ozturk, B.M. Cetegen, Modeling of Plasma Assisted Formation of Precipitates in Zirconium Containing Liquid Precursors Droplets, Mater. Sci Eng., 2004, A384, p 331-35110.1016/j.msea.2004.06.042 ↗
6. L. Xie, X. Ma, E.H. Jordan, N.P. Padture, M. Gell, Deposition of Thermal Barrier Coatings Using the Solution Precursor Plasma Spray Process, J. Mater. Sci., 2004, 39, p 1639-164610.1023/B:JMSC.0000016163.81534.19 ↗
7. J. Oberste Berghaus, S. Bouaricha, J.G. Legoux, and C. Moreau, Injection Conditions and in-flight Particles States in Suspension Plasma Spraying of Alumina and Zirconia Nano-ceramics, Thermal Spray 2005: Advances in Technology and Application, ASM International, 2005, May 2-4 (Basel, Switzerland), ASM International10.31399/asm.cp.itsc2005p0512 ↗
8. M. Gell, Application Opportunities for Nanostructured Materials and Coatings, Mater. Sci. Eng., 1995, A204, p 246-25110.1016/0921-5093(95)09969-7 ↗
9. R. Benocci, R. Florio, A. Galassi, M. Paolicchio, M. Piselli, C. Sala, M. Sciascia, E. Sindoni, Experimental Study for the Optimization of Plasma Torch Operations, Eur. Phys. J., 1999, D6, p 269-279
10. E. Moreau, C. Chazelas, G. Mariaux, and A. Vardelle, Modeling the Restrike Mode Operation of a DC Plasma Spray Torch, J. Thermal. Spray Technol., 2006, 15(4), p 524-53010.1361/105996306X147306 ↗
11. N. Singh, M. Razafinimanana, A. Gleizes, The Effect of Pressure on a Plasma Plume: Temperature and Electron Density Measurements, J. Phys. D: Appl. Phys., 1998, 31, p 2921-292810.1088/0022-3727/31/20/028 ↗
12. M. Boulos, P. Fauchais, E. Pfender, Thermal Plasmas: Fundamental and Applications, Vol. 1, Plenum Press, New York, 1994, p 33-4310.1007/978-1-4899-1337-1 ↗
13. P. Sagaut, Introduction to Large Eddy Scale Simulations for the Modeling of Uncompresible Flows, in French, Mathématiques et Applications, 1998, Vol. 30, Springer-Verlag
14. F. Archambeau, N. Méchitoua, M. Sakiz, Code_Saturne: A Finite Volume Code for the Computation of Turbulent Incompressible Flows—Industrial Applications, Int. J. Finite Vol., 2004, 1(1), p 1-62
15. G. Mariaux, A. Vardelle, 3-D Modeling of the Plasma Spray Process. Part: 1 Flow Modeling, Int. J. Therm. Sci., 2005, 44, p 357-36610.1016/j.ijthermalsci.2004.07.006 ↗