Deposition Behavior of Copper Fine Particles onto Flat Substrate Surface in Cold Spraying
Source abstract
Abstract
Cold spray is a promising process to fabricate high-quality metallic coatings. However, it is necessary to improve some properties, especially the adhesive strength of the coating to the substrate to clarify deposition mechanism of the solid particles onto substrate surface. In this study, deposition behavior of the cold sprayed copper fine particles was observed precisely and the adhesive strength of the coating was evaluated. The deposition behavior of the sprayed individual copper particles on mirror polished stainless steel substrate was fundamentally investigated. The interface microstructure between sprayed particle and substrate revealed that an amorphous-like band region was recognized at interface during coating fabrication at high power conditions. For the deposition mechanism of the cold sprayed particles onto substrate surface, it was indicated that the deformation of the particles initially induce the destruction of its surface oxide and an appearance of the active fresh surface of the material may enhance the bonding between particles and substrate. On the other hand, in coating fabrication at high power condition, bonding between particle and substrate may be possibly formed via oxygen-rich amorphous-like layer at interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. K. Kang, S. Yoon, Y. Ji, and C. Lee, Oxidation Dependency of Critical Velocity for Aluminum Feedstock Deposition in Kinetic Spraying Process, Mater. Sci. Eng., 2008, A486, p 300-30710.1016/j.msea.2007.09.010 ↗
2. H. Assadi, F. Gartner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51, p 4379-439410.1016/S1359-6454(03)00274-X ↗
3. M. Fukumoto, H. Wada, K. Tanabe, M. Yamada, E. Yamaguchi, A. Niwa, M. Sugimoto, and M. Izawa, Effect of Substrate Temperature on Deposition Behavior of Copper Particle on Substrate Surface in the Cold Spray Process, J. Therm. Spray Technol., 2007, 16(5-6), p 643-65010.1007/s11666-007-9121-9 ↗
4. S.H. Zahiri, D. Fraser, and M. Jahedi, Recrystallization of Cold Spray-Fabricated CP Titanium Structure, J. Therm. Spray Technol., 2009, 18(1), p 16-2210.1007/s11666-008-9212-2 ↗
5. P.-H. Gao, Y.-G. Li, C.-J. Li, G.-J. Yang, and C.-X. Li, Influence of Powder Porous Structure on the Deposition Behavior of Cold-Sprayed WC-12Co Coatings, J. Therm. Spray Technol., 2008, 17(5-6), p 742-74910.1007/s11666-008-9258-1 ↗
6. P.C. King, S.H. Zahiri, and M. Jahedi, Focused Ion Beam Micro-Dissection of Cold-Sprayed Particles, Acta Mater., 2008, 56, p 5617-562610.1016/j.actamat.2008.07.034 ↗
7. M. Grujicic, C.L. Zhao, W.S. DeRosset, and D. Helfritch, Adiabatic Shear Instability Based Mechanism for Particle/Substrate Bonding in the Cold-Gas Dynamic-Spray Process, Mater. Des., 2004, 25, p 681-68810.1016/j.matdes.2004.03.008 ↗
8. C.-J. Li, W.-Y. Li, and Y.-Y. Wang, Formation of Metastable Phase in Cold-Sprayed Soft Metallic Deposit, Surf. Coat. Technol., 2005, 198, p 469-47310.1016/j.surfcoat.2004.10.063 ↗
9. K.H. Kim, M. Watanabe, J. Kawakita, and S. Kuroda, Grain Refinement in a Single Titanium Powder Particle Impacted at High Velocity, Scripta Mater., 2008, 59, p 768-77110.1016/j.scriptamat.2008.06.020 ↗
10. T. Schmidt, F. Gartner, H. Assadi, and H. Kreye, Development of a Generalized Parameter Window for the Cold Spray Deposition, Acta Mater., 2006, 54, p 729-74210.1016/j.actamat.2005.10.005 ↗